Product specifications

Worklight (cont'd)
Changing the bulb
CAUTION: ALWAYS REMOVE BATTERY BEFORE CHANGING
THEBULB.
To change the bulb:
I Remove the lens cover
assembly by turning it
counterclockwise.
2 Remove the bulb from its
spring mounting.
3 Insert a new bulb.
4 Replace lens cover.
5 Reinsert battery.
Maintenance
Clean the tool with a rag dampened with clean water. Do not use
chemicals or soap. Do not allow water to get inside the tool.
Make sure the vent passages remain clear of dust and debris to avoid
overheating
the tool.
Store the tool in a clean dry place.
m All repairs must be performed by a qualified electrician.
a Opening the tool voids the warranty.
6 Check for correct operation.
Page 14 Page 15