Cut Sheet

Sure-Lites
The LED APC series is UL924 code compliant solution for indoor exit and
emergency requirements that will operate for a minimum of 90 minutes
during a power outage. The LED emergency heads are adjustable, can
be side or top mounted and will provide 17 feet of emergency egress
coverage. The nickel cadmium battery requires no maintenance.
The exit features an LED source available for red or green letters, is
field configurable for single or double face and has field configurable
chevrons. The polycarbonate housing is universal mount ( ceiling, wall or
end ) and available in a white or black finish. The high powered remote
capable versions (H series) will power two additional 3.6 volt emergency
heads from the APWR series to generate a total of 34 feet of emergency
egress coverage.
SPECIFICATION FEATURES
Electrical
- Dual Voltage Input 120/277VAC,
60Hz
- Line-latching
- Solid-State Voltage Limited
Charger
- Solid-State Switching
- Brownout Protection
- Low Voltage Disconnect
- Overload/Short Circuit Protection
- Test Switch / Power Indicator
Light
- High Power Combo available
capable of running two additional
LED remote heads
- 3.6V, .78W DC long Lasting
LED Heads
Housing Construction
- All components are injection
molded, color stable, high impact
polycarbonate material
- Textured finish available in white
or black
- Components are of snap-fit
construction to facilitate under
5-minute installation
- Reinforcing ribs throughout
to provide maximum strength
- Molded-in wireways facilitate
internal wire routing and
connections
- All components including
battery and electronics are
located inside the exit housing
- Snap-out or snap-in chevron
directional indicators have full
3/4” stroke
- Universal exits can be field
configured as single face or
double face
- Snap-fit canopy with captive
mounting screws included with
all exits
- Exit can be ceiling, wall, or end
mounted
- Universal J-box mounting pattern
- Operating temperature range
10 °C to 40 °C
Battery
- Sealed nickel cadmium
- Maintenance free, long life
- Full recharge time:
24 hrs (max.)
Code Compliance
- UL 924 Listed
- UL Damp Location Listed
- Life Safety NFPA 101
- NEC/OSHA
- Most State and Local Codes
- California Energy Code
compliant
Lamp Data
- AC LED: Long life LED lamps
provide uniform diffused
illumination
- DC: LED DC lamps (Brighter in
emergency mode)
- Heads DC: 3.6V, .78W Long Life
LED Heads Light Output
Equivalent to 5.4W Incandescent
Warranty
- Five-year warranty
- Seven-year prorated battery
warranty
APC/APCH
SERIES
TD505037EN
2017-10-3
DESCRIPTION
ENERGY
DATA
Maximum power
consumption
under all charge
conditions:
Sealed Nickel
Cadmium Battery
LED Exits - Red
Input Power:
120V = 1.31W
277V = 1.68W
Input Current
(Max.):
120V = .09A
277V - .09A
Power Factor:
120V = >.12
277V = >.07
LED Exits - Green
Input Power:
120V = 1.55W
277V = 1.45W
Input Current
(Max.):
120V = .09A
277V = .09A
Power Factor:
120V = >.14
277V = >.06
Energy Data
AC Only LED
Exits - Red
Input Power:
120V = 2.34W
277V = 1.62W
Input Current
(Max.):
120V = .14A
277V - .10A
Power Factor:
120V = >.14
277V = >.06
LED Exits - Green
Input Power:
120V = 2.8W
277V = 2.1W
Input Current
(Max.):
120V = .10A
277V = .10A
Power Factor:
120V = >.20
277V = >.07
8-1/4”
[210mm]
7-1/2”
[191mm]
11-11/16” [297mm]
16-9/16” [421mm]
5-1/2” [140mm]
3-15/16”
[100mm]
1-3/4”
[45mm]
2-5/16”
[59mm]
3/4”
[19mm]
POLYCARBONATE EXIT
AC ONLY SELF POWERED
EMERGENCY
LED LAMPS
EXIT LIGHTING
Catalog #
Type
Date
Project
Comments
Prepared by
ORDERING INFORMATION
SAMPLE NUMBER: APXH7R2
Series Remote Heads Powered Battery Face Options Letter Colors Housing Color Catalog numbers
APC
_ = no remote heads
7 = nickel
cadmium
battery
_ = Universal R = Red
G = Green
_ = White
BK = Black
APC7R, APC7RBK,
APC7G,APC7GBK
H = two 3.6V LED heads
7 = nickel
cadmium
battery
_ = Universal R = Red
G = Green
_ = White
BK = Black
APCH7R, APCH7RBK,
APCH7G,APCH7GBK
operating
temperature
range
-20˚to 50˚C
operating
temperature
range
10˚to 40˚C
APC7G