Assembly Instructions

 Thank you for choosing All Things Cedar 

10' Teak Market Umbrella

(TU90 Assembly & Operational Instructions)

Tools Required:

 You will need a Flat Head and a #1 Robertson Screwdriver (optional: hammer)

NOTE: 2 people are required for assembly and installation

STEP 1. Connect Pulley Fitting



Locate the upper most hole on the upper pole and attach pulley fitting

with fitting bolt



Attach pulley fitting with small screw through smaller hole on pulley

fitting

STEP 2. Attach Pulley Rope



Tie one end of Rope to brass eyelet on the umbrella hub



Feed free end of the rope through Pulley Fitting, then tie to the

small hole on the Brass Ring

Package Contents:

(A) Cap … 1

(B) Canopy …1

Pole…1

(D) Lower Pole …1

 Brass Pin … 1

Hardware Pack:

 Brass Ring …1

 Pulley Fitting …1

 Fitting Bolt …1

 Small Screw … 1

 Rope … 1