User Manual

www.allavino.com 8 1-888-980-4809
This is the standard 750 mL bottle, which most wine refrigerators
are configured around as it is the most popular size on the market.
It measures 11-1/2" tall with a 2-15/16" diameter and the shoulder
tapers up from 7-3/4" to 8-1/2". This wine refrigerator can easily
store 5 of these bottles on each shelf for a total of 30 bottles.
This bottle is wider and shorter than the standard 750 mL bottle. It
measures 10-5/8" tall with a 3-1/4" diameter and the shoulder
tapers up from 5-1/2" to 8". Bottles this wide don't usually fit in
undercounter wine refrigerators and if they do, they have issues
with rubbing on the shelf above and scuffing your labels. This wine
refrigerator has no issues with this type of bottle so your maximum
capacity will not be affected if you have them in your collection.
This bottle is taller than the standard 750 mL bottle. It measures 12-
1/16" tall with a 2-15/16" diameter and the shoulder tapers up from
8" to 9". The taller shoulder makes the bottles touch, pushing the
outer bottles over the edge of the shelf. This is not a problem on the
top shelf in each zone or the bottom shelf, but it does create an
issue on the remaining shelves. On those shelves, you can alternate
3 of these bottles in front with 2 standard 750 mL bottles in the
back, so you can store up to 24 of these wine bottles without having
to remove shelves or affecting the overall bottle capacity.
This bottle has the same diameter at the base, but the shoulder is
wider. It measures 11-7/8" tall with a 2-15/16" diameter at the base
and the shoulder tapers up from 7-1/2" to 8-1/4" with a 3-1/16"
diameter. The wider shoulder pushes the outer bottles over the
edge of the shelf. This is not a problem on the top shelf in each zone
or the bottom shelf. On the remaining shelves, you can alternate 2
of these bottles in back with 3 standard 750 mL bottles in the front,
allowing you to store up to 21 of these bottles without having to
remove shelves or affecting the overall bottle capacity.
This Pinot bottle measures 11-5/8" tall with a 3-1/2" diameter and
the shoulder tapers up from 5-1/2" to 8-1/4". On this model, you
can fit 8 pinot bottles without reducing the overall capacity or
reconfiguring shelves. Three bottles fit on the bottom shelf, three
more fit on the front of the top shelf in the lower zone and two
more fit in the outer front grooves of the top shelf (the light does
not allow a bottle with this diameter to fit in the center front groove
of the top shelf, but another bottle of any type can fit there).
Champagne bottles are too big to fit on the upper shelves, but you
can still store 2 on the bottom shelf without having to remove a
shelf. They measures 12-1/4" tall with a 3-3/4" diameter and the
shoulder tapers up from 5-1/2" to 7-3/4". Most wine refrigerators
this size would not be able to store any Champagne bottles without
removing a shelf.