INSTRUCTION MANUAL BUILT-IN WINE COOLER MODEL：VSWR56-2 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Allavino has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice ALLAVINO 8520 Miralani Dr., San Diego, CA 92126 www.allavino.
Table of Contents Diagram and Description .................................................................................................................................... 3 Safety Tips .................................................................................................................................... 4 Installation Instructions ....................................................................................................................................
Diagram and Description 1. 2. 3. 4. 5. 6. 7. www.allavino.
Safety Tips Before using this appliance, it must be properly positioned and installed as described in this manual, so please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic precautions. Failure to heed these safety requirements may result in severe personal injury or death. Plug into a grounded 3-prong outlet.
Installation Instructions BEFORE USE: Remove the exterior and interior packaging. Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. Install handles. This appliance is designed for free standing or built-in (fully recessed) installation.
Operation Instructions The wine cellar should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate. Your Allavino Wine Cellar includes an operating panel on the front.
Racking Configuration Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This also helps to provide an even temperature range throughout the unit. Make sure that bottles are not all grouped together either at the top or bottom of the cabinet. Never try to pull out more than one sliding shelf at a time as it can cause the appliance to tip forward. The shelves are removable to help with cleaning and maintenance. To remove a shelf, pull it out as far as you can.
Troubleshooting There are many common issues you may experience with your wine cellar that can be solved very easily, without the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems: PROBLEM Wine cellar does not operate Wine cellar is not cold enough Wine cellar is turning on and off frequently The light does not work Vibrations The wine cellar seems to make too much noise The door will not close properly www.allavino.
Technical Specifications Bottle Capacity Up to 56 Bottles Dimensions 33.9" H x 23.4" W x 23.6" D (25.6" w/ handle) Weight 123.5 lbs. Voltage / Frequency 115v / 60 Hz Running Amps 2.3 A Operating Temperature Upper Zone: 41°F - 61°F Lower Zone: 45°F - 64°F Ambient Temperature 32°F – 100°F www.allavino.
Warranty Information WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Allavino will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Allavino will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.
