AI 012121

Table Of Contents

r:o

ructions f

ton Ins

mbly & Installati

esAs

Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com

WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than

one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that

the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before

Glass shade installation step

Step 2. Lnstall candelabra bulb,do not use

bulbs that exceeds 40W

40W BULBS

Main body

Crystal tray

8931尖子

012121 1-Light Wall Sconce

Fixture Assembly

PAGE 1
Assembly & Installation Instructions f or: 012121 1-Light Wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com WARNING - TO REDUCE THE RISK OF FIRE OR INJURY: 1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help. 2.Turn off the power to the fixture's circuit at the service panel.
PAGE 2
Assembly & Installation Instructions f or: 012121 1-Light Wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com Fixture Assembly ELECTRICAL BOX Step 4. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed MOUNTING BLOCK FLAT SCREW L Step 5. Attach the mounting plate to outlet box with screws N Step 6. Refer to wiring diagram.