AI 020422

020422-003-FR001 2-Light Wall lamp
Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.
2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.
3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.
Step 1. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed
Step 2. Attach the mounting plate to outlet box
with screws
Step 3. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector
Step 4. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.
T)SCENANDENC (IKETSOC
S
ERWI
UNDGRO
RESSE WIHOU
N
L
G
ELECTRICAL BOX
MOUNTING BLOCK
LAMP BODY
Black & white supply wires
Fixture black and white wires
Change to black and white
FLAT SCREW
P1