AI 021040

WWW.ALLEGRICRYSTAL.COM
866.820.2665
P3
5-Canopy Bowl
6-Crystal Bobeche
2-Cross Bar (Strap)
4-Outlet Box Screws
(not included)
3-Threaded Nipple
(with hex nuts)
10-Chain
7-Collar Loop
8-Collar Loop Ring
9-Easy Link
1-Outlet box
(not included)
Turn Power Off
All electrical components must be
installed by a licensed electrician in
accordance with the National
Electric code and the appropriate
local electrical codes.
R
Electrical Danger
WARNING
PENDANT CANOPY INSTALLATION:
Step 1. Carefully unpack parts and lay them down on a
clean soft cloth for identification:
Step 6. Assemble frame as shown in page 4 OPTION 1
(PENDANT)
Step 15. Determine chain length needed for installation,
if needed cut chain with a Bolt Cutter Tool. Hung chain
10 to Collar loop 7 with an easy link 9
Step 4. Install Canopy bowl 5 and crystal bobeche 6 to
Nipple 3 then secure all parts with Collar Loop Ring 8
Step 3. Install Threaded Nipple 3 to Cross Bar 2 and
Collar loop 7 on the other side, thighteen all parts with
hex nuts to prevent from turning
Step 2. Install Cross bar 2 to outlet box 1 with the two
outlet box original screws 4
G
N
L
Fixture wires
2-Cross Bar with 2 Studs
(Universal Round)
4-Outlet Box Screws
(not included)
5-Flat Canopy
1-Outlet box
(not included)
11-Decorative Nuts
G
N
L
Step 1. Carefully unpack parts and lay them down on a
clean soft cloth for identification:
SEMI-FLUSH CANOPY INSTALLATION:
Step 2. Install Cross bar 2 with the two Studs pointing
towards the floor to outlet box 1 with the two outlet box
original screws 4
Step 3. Assemble frame and canopy as shown in page 4
OPTION 2 (SEMIFLUSH)