AI 025742

CANOPY MOUNTING INSTRUCTION
WARNING
Electrical Danger
Turn Power Off
All electrical components must be
installed by a licensed electrician in
accordance with the National
Electric code and the appropriate
local electrical codes.
c
R
WWW.ALLEGRICRYSTAL.COM
800.525.2655
1. Outlet box (by others)
2. Mounting Plate
6. BallNut x 2
4. 8/32"Screw x 2
3. M4 Screw
P3
C20-16-06 -01C20-16-06 -01C20-16-06 -01C20-16-06- 01
5. MAIN FRAME
MODEL 025742
Canopy/Main Frame Installation:
1. Install Mounting Plate #2 to outlet box, with the
two screws #4. Make sure M4 Screw points down
towards the floor.
2. Bring Main Frame #5 a few inches close to
outlet box and make electrical connections as
follows: Fixture use SPT2 parallel wire.
3. Split wire in two and connect fixture ribbed wire
to power supply black wire, then connect fixture
smooth wire to power supply white wire, finally
connect fixture copper or silver wire to power
supply green ground wire.
4. Secure all connections with wire nuts and black
electrician's tape or as directed by your local
electric code.
5. Pass screw M4 through holes on Main Frame #5
and secure it with BallNut #6 then install light bulbs.