AI 026221

Table Of Contents

40W Bulbs

026221-010-FR001 8-Light wall Sconce

Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com

WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than

one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that

the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before

crystal installation step

Step 3.

Step 2. Assemble crystal strand to the lamp body

as shown.

Install candelabra bulbs, do

not use bulbs that exceeds

40W

Lamp body

Crystal strand

PAGE 1
026221-010-FR001 8-Light wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com WARNING - TO REDUCE THE RISK OF FIRE OR INJURY: 1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help. 2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that the power is off. 3.
PAGE 2
026221-010-FR001 8-Light wall Sconce Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com Step 4. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed ELECTRICAL BOX MOUNTING BLOCK Step 5. Attach the mounting plate to outlet box with screws Step 6. Refer to wiring diagram. Splice the ribbed side of fixture cord to the white supply wire from outlet box with wire connector.