Installation Guide

Table Of Contents

r:o

ructions f

ton Ins

mbly & Installati

esAs

e Assembly

Fixtur

Customer Service :(702)361-4345, (800)525-2655,customer.service@kalco.com

WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than

one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that

the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before

crystal installation step

Step 3. Install E12 bulbs ,do not use

bulbs that exceeds 40W

Step 2. Fix part crystal to part main body by using

flat screw .

crystal

Main body

Flat screw

027622 8-Light wall lamp

PAGE 1
Assembly & Installation Instructions f or: 027622 8-Light wall lamp Customer Service :(702)361-4345, (800)525-2655,customer.service@kalco.com WARNING - TO REDUCE THE RISK OF FIRE OR INJURY: 1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help. 2.Turn off the power to the fixture's circuit at the service panel.
PAGE 2
Assembly & Installation Instructions f or: 027622 8-Light wall lamp Customer Service : (702)361-4345,(800)525-2655,customer.service@kalco.com Fixtur e Assembly Step 4. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed ELECTRICAL BOX MOUNTING BLOCK Step 5. Attach the mounting plate to outlet box with sorews DECORATIVE NUTS LAMP BODY L Step 6. Refer to wiring diagram.