Owner`s manual

ABRASIVE BLASTING HELMETS
TEMPERATURE CONTROLLER AND FLOW VALVES
AIR TEMPERATURE
CONTROLLER
These valves adjust the amount of air to
the helmet and adjust air 25°F warmer
or cooler than the ambient air for use in
cold or hot environments.
4000-01 HP Cooler w/Belt
4000-20 HP Heater w/Belt
LOW PRESSURE FLOW ADAPTER
The low pressure supplied air respirator adapter
allows the helmet to connect to an ambient air
pump or any low pressure air source. Low profile,
lightweight plastic threaded fitting offers the
convenience of quick connect design with belt
and clip assembly.
2015 LP Constant Flow Adapter w/Belt
ADJUSTABLE FLOW
CONTROL VALVE
NIOSH approved, injection molded,
Flow Control Valve assembly provides the
wearer with the ability to adjust the air
flowing into the helmet. The adjustment
barrel is easy to turn even with blasting
gloves on. Comes with waist belt.
NV2016 HP Flow Control Valve w/Belt
Refer to Nova 2000 and Nova 3 Matrix (above)
for NIOSH approved configurations.
AbRASivE bLAStiNG HELmEtS SyStEm COmPONENtS
NV20-00
NV30-00
1
CHOOSE AN ALLEGRO
HOOD ASSEMBLY
2
CHOOSE AN AIR
CONTROL DEVICE
3
CHOOSE THE APPROPRIATE
AIRLINE HOSE
4
CONNECT TO ANY
AIR SOURCE
LOW PRESSURE
AIRLINE HOSE
2035
2036
HIGH PRESSURE
AIRLINE HOSE
2028
2029
FILTER WITH T-CONNECTION
2015
AIRLINE FILTER
Made for rugged environments, this “Pot” type filter utilizes a
large capacity quality filter cartridge to provide longer life filtration.
Greater material surface area provides increased absorption of oil,
water and odors. Made of impact and corrosion-resistant aluminum
and equipped with an airline regulator and two outlets. 75 CFM
3000-01
NV2016
4000-01
4000-20
respirators
19
REPLACEMENT FILTER CARTRIDGES
Quality Filter Cartridges provide better and longer
lifeltration.Universaldesignallowsltercartridge
to fit into many filter brands on the market.
3100-02
Two outlets
Adjusting regulator
8 x 10mm bolt flange
Final respirator felt
Polyester wadding removes
any dust particles
1” Air inlet
Reinforced felt material for further
absorption of any oil & dust particles
Quality Activated Carbon-specially
formulated for increased surface area
to increase odor removal efficiency
from compressed air
Rugged steel construction
power coated inside & out
Mesh screen separates Activated
Alumina and the Activated Carbon
Quality Activated Alumina spheres have
increased surface area for better moisture
and oil removal from compressed air
Reinforced felt material absorbs
oils and dust particles
Polypropylene cartridge shell
will not corrode or breakdown
Water outlet drain
IMPROVED