Owner`s manual

HIGH PRESSURE FILTRATION PANELS AND ACCESSORIES
CO MONITOR CALIBRATION TEST KIT
Usedtocheckandcalibrate
the CO Monitor on Allegro’s
Carry-Air, Wall-Air or Oil-Less
Compressor.Kitincludesa
17 liter cylinder each of Span
Gas and Zero Gas, a constant
flow pressure regulator with
gauge and tubing in a plastic
carrying case.
9872-60 COMonitorCalibrationTestKit
9872-61 Calibration Span Gas
9872-62 Calibration Zero Gas
O2 CALIBRATION KIT
Housed in a durable plastic case within integrated
carryinghandle.UsedtocheckandcalibratetheO2
Monitor. Includes a 17 liter cylinder, continuous flow
pressure gauge, 3 lbs.
9871-65
LOW FLOW ALARM
A low pressure warning device designed to alert that
supplied air pressure has decreased below a specified
minimum value. A miniature adjustable pressure switch
is connected to a battery operated external alarm.
The pressure switch is field adjustable. The alarm will
be activated if the air pressure falls below the preset
(factory set @ 40 PSIG) or user adjusted setting.
Alarm will turn off once pressure exceeds the alarm
pressure setting.
9871-50
HP ALLEGROAIR AIRLINE COOLING SYSTEM
A low cost and portable means of cooling breathing air while keeping workers comfortable
and productive for hours. This system is capable of reducing the air temperature from 180°F
to as low as 50°F. The cooling system is connected to a high pressure breathing source,
such as a filtration panel, cascade system or compressor (not to exceed 150 psi) through
a 5' long inlet supply airline using a heavy duty Hansen coupler. Air flowing through
the FDA Grade PVC temperature cooling coil inside the 70 quart cooler reduces
the air temperature by having ice poured onto and around the coil. Coils are
separated to allow ice to surround hose. The outlet air is filtered at the end of
the coil line by a 5 micron particulate air filter, which removes condensation
that may build up in the hose. The pressure regulator includes a pressure
gauge and adjustable knob with locking
ring. Single outlet Coupler can adapt
to 3-Worker Manifold. Transportation
is made easy with durable wheels and
a locking telescoping pull handle.
Dimensions: 21"l x 20"w x 24"h,
28 lbs. without ice.
9820-HP
respirators
25
IMPROVED