Owner`s manual

AXIAL BLOWERS
CFM calculated using 15' x 8" 12" or 16" ducting based on the diameter of the blower.
Free Air calculated at blower.
* See Hazardous Location Information on page 57.
Warning: Explosion-proof blowers must be used with statically conductive ducting.
** Explosion-Proof Blowers require an explosion-proof socket. See page 55.
16” STANDARD BLOWER
Designed for very large confined spaces this large 16"axial blower delivers high
output for drawing or pushing air. The durable and tough metal housing holds a
6 blade impeller. Stackable for multiple blower use.
Free Air One 90˚ Bend Two 90˚ Bends
3400 2800 2300
47 lbs.
1
⁄2 hp 7.2 A/115V AC
9515
9515-E
16” HIGH OUTPUT BLOWER
Designed for applications requiring a maximum amount of output, this 16" High
Output Blower offers a 2 hp electric motor housed in a rugged metal casing. Its
efficient 3 blade impeller and high powered motor allow for high air flow. Stackable
for multiple blower use. Includes a special 30 amp plug.
Free Air One 90˚ Bend Two 90˚ Bends
5500 4950 4400
74 lbs. 2 hp 21A/10.5A/115/230V AC
9516
16” EXPLOSION-PROOF BLOWER
Sameasour16"StandardBlower,butincludesexplosion-proofUL/CSAlisted,single
phase motor and NEMA rated 115V plug. Meets Class I, Division 1 and 2, Groups C
& D, Class II Division 1 and 2 Groups F & G.
Free Air One 90˚ Bend Two 90˚ Bends
2900 1800 1750
67 lbs.
1
⁄2 hp 8.2/4.1A/115/230V AC
9515-01
16” EXPLOSION-PROOF HIGH OUTPUT BLOWER
Designed for applications requiring a maximum amount of output. Made from
16 gauge cold rolled steel housing and power coated in safety orange with
4 blade impeller. Powered by a 1
1
⁄2 hp,3450RPMULListed,IECex/ATEX/INMETRO
Certified Motor. Comes with an 115V plug, interchangeable flange for intake or
exhaust mounting, integrated carry handles on all four sides for easy transport and a
steel/zinc plated grill. 4 rubber feet, built in on/off switch, voltage change switch and
stackable are added features of this powerhouse unit.
Free Air One 90˚ Bend Two 90˚ Bends
4839 2942 2926
62 lbs. 1
1
⁄2 hp 15.5/7.8A/115/230V AC, 50/60 Hz
9515-50EX
9515-50EXE
20” STANDARD BLOWER
Designed for large confined spaces, this 3 blade impeller can be used for ventilating or
extricating air. It comes with 16 gauge cold rolled steel housing and integrated carry
handles on four sides. It’s stackable with rubber feet and power coated in hi-viz orange.
Free Air One 90˚ Bend Two 90˚ Bends
4650 CFM 3150 2950
56 lbs. 7.2A/115V AC
9525
9525-E
20” HIGH OUTPUT BLOWER
Designed for applications requiring a maximum amount of output. Made from
16 gauge cold rolled steel housing and power coated in safety orange with 4 blade
impeller. Interchangeable flange for intake or exhaust mounting. Integrated carry
handles on all four sides for easy transport. Steel/Zinc plated grill, 4 rubber feet
andstackableareaddedfeaturesofthispowerhouseunit.2HPULListed,
CSA Certified motor.
Free Air One 90˚ Bend Two 90˚ Bends
7500 6700 6130
83 lbs. 2 hp 21A/10.5A/115/230V AC
9525-50
20” EXPLOSION-PROOF BLOWER
Electric,explosion-proofmotorisUL/CSAlistedsinglephasemotorandNEMArated.
115V plug and 3 blade fan. Meets Class I, Division 1 and 2, Groups C & D, Class II
Division 1 and 2 Groups F & G.
Free Air One 90˚ Bend Two 90˚ Bends
4650 CFM 3150 2950
75 lbs. 8.2/4.1A/115/230V AC
9525-01
20” EXPLOSION-PROOF HIGH OUTPUT BLOWER
Designed for applications requiring a maximum amount of output. Made from
16 gauge cold rolled steel housing and powder coated in safety orange with 4 blade
impeller. Powered by a 1
1
⁄2 hp,3450RPMULListed,IECex/ATEX/INMETROCertied
Motor. Comes with an 115V plug, interchangeable flange for intake or exhaust
mounting, integrated carry handles on all four sides for easy transport and a steel/zinc
plated grill. 4 rubber feet, built in on/off switch, voltage change switch and stackable
are added features of this powerhouse unit.
Free Air One 90˚ Bend Two 90˚ Bends
6837 5286 4829
71 lbs. 1
1
⁄2 hp 15.5/7.8A/115/230V AC, 50/60 Hz
9525-50EX
9525-50EXE
Blowers offered in 220V/50Hz. For more information call Customer Service at 800-622-3530
Meets the CSA requirements for the following product safety standards:
Fans and Ventilators, C22.2 No. 113 Issued: 2008/10/01, Edition 7.
blowers
49