Owner`s manual

BLOWER ACCESSORIES
Y-DUCT CONNECTOR
Allegro’s Y-Duct Connectors helps distribute air flow
in multiple directions. Made of industrial grade
galvanized sheet metal and is sized to fit standard
8” or 12” circular ducting. The adapter inlets
measure 8”x 8”x 8” and 12”x 12”x 12” respectively.
Easily connects to your ducting by using standard
ringclamps.UsingmultipleY-DuctConnectors
with other fittings may reduce your air flow.
9500-Y 8" diameter Y-Duct Connector, 2½ lbs
9550-Y 12" diameter Y-Duct Connector, 4 lbs
DUCT TO DUCT CONNECTOR
Allows safe connection of additional ducting for
remote locations, this connector is constructed of
galvanized steel with a raised lip to hold ducting
in place.
9500-01 8" diameter
9550-01 12" diameter
9600-01 16" diameter
9650-01 20" diameter
BLOWER FILTER BOX
Hook up your existing blower with 8”ducting to the
back of Allegro’s Filter Box. It filters the ambient air
from or to the blower through the Filter Box. Can be
attached on either inlet or outlet side of blower for
positive or negative filtration. Filters particulates and
dust. Made of galvanized sheet metal. Operates with
up to two filters inserted at once. One filter included.
Dimensions are 24”l x 24”w. Weighs 13 lbs.
9500-34
STANDARD
EXTENSION CORD
This 50’ yellow extra heavy
duty cord powers 15 AMP,
120 V. Weather resistant at temperature range of 58°F
(-50C) to 140°F (60° C). Includes rugged and durable
clearmoldedplugs.MeetsOSHAspecicationsandUL
listed. Weighs 13 lbs.
9540-50
EXPLOSION-PROOF EXTENSION CORD
This 50' black extension cord comes with a 20 AMP
connector and plug. Weather resistant at a tempera-
ture range of -40°F (-40°C) to 194°F (90°C). Flexible
andprovidesexcellentabrasionresistance.ULListed
and CSA certified for indoor and outdoor use. CSA
Certifications: Class I Division 1 & 2 Groups B, C, and
D; Class II, Division 1 & 2 Groups F* and G.
*Do not use where electrically conductive dusts are
present (most coal dust is not electrically conductive).
Weighs 15.5 lbs.
9540-50EX
Explosion-Proof Extension Cord
blowers
55
ADAPTER REDUCER
Reduces 16" blower output to 8" duct. Made of
flexible soft nylon. For use with 9515 and 9515-01
blowers. Includes duct-to-duct connector.
9600-50 16"- 8"
METAL ADAPTER
Reduces 12" blower output to 8" duct.
Useonlywith9509-50.
9509-03 12"- 8" Soft Reducer
AXIAL INLET ADAPTER
Usefultoutility,weldingandconstructionworkers,
this adapter allows an axial blower to draw fumes
and other contaminants out of a work area quickly
and effectively. Ducting mounted to the adapter will
disperse contaminated air away from the work area.
It can be used on any Allegro 8" metal Axial Blower
and allows a single axial blower to work in two
completely different applications.
9500-03 8" diameter
9600-55 16"-12" diameter
EXPLOSION-PROOF SOCKET
Designed for use in hazardous locations. Features an
iron mounting box with triple coat finish and spring-
loaded door keeping dust out of receptacle when plug
is not in use. When plug is in use, a neoprene gasket
inside receptacle seals around plug keeping out dirt,
water, dust and other foreign matter.
9503-03