User manual

ManualsBrandsAllen-Bradley Manualselectrical equipment & supplies1609-P10000E

Essential Components

Get the right components, at the right price,

right where you need them.

Power

Operator

Interface

Logic

Connectivity

Safety

Sensors

& Switches

Summary of content (340 pages)

PAGE 1
Essential Components Get the right components, at the right price, right where you need them.
PAGE 2
Bulletin Index Bulletin Number Page 100-C ............................................1-31 100-CR .........................................1-31 100-D ...........................................1-39 100-G............................................1-44 100-K ............................................1-28 100-KR .........................................1-28 100S-C .........................................1-32 100S-D .........................................1-40 103C/107C .................................
PAGE 3
Table of Contents Power 1-1 Motor Protection Circuit Breakers ..............................................1-2 Motor Circuit Protectors.....................................................................1-4 Molded Case Circuit Breakers .....................................................1-18 Contactors..................................................................................................1-25 Solid State Contactors ......................................................................
PAGE 4
Essential Components Get the right components, at the right price, right where you need them. Within these pages, you will find an fundamental to your success and give extensive selection of your essential you the greatest value. Allen-Bradley® component products. Look through this catalogue, call With Allen-Bradley components, your local Rockwell Automation you will find the highest quality representative, or visit us online.
PAGE 5
Broad Selection of Quality Products r 0QUJNJTF NBDIJOF QFSGPSNBODF XJUI UIF SJHIU product r $PNQMJBOU XJUI JOUFSOBUJPOBM TUBOEBSET r &YUFOTJWF TFMFDUJPO GPS TJOHMF TPVSDF DPOWFOJFODF and supply chain efficiencies r 2VBMJUZ DPNQPOFOUT EFTJHOFE GPS ZPVS DSJUJDBM applications Flexible, Hassle-Free Ordering r $BMM ZPVS MPDBM EJTUSJCVUPS UPEBZ r 1SPEVDU 4FMFDUJPO 5PPMCPY BMMPXT ZPV UP TFMFDU BOE DPOñHVSF UIF QSPEVDUT you need with confidence r 7JTJU www.rockwellautomation.
PAGE 6
Essential Components The Rockwell Automation Product Selection Toolbox (PST) offers a complete suite of user tools for product selection and configuration across product lines from QSPKFDU DPODFQUJPO UISPVHI ñOBM EFTJHO From push buttons to drives to motor control centers and fully networked control systems, you’ll find the product information and configuration assistance you need to help you and your customers succeed with Rockwell Automation.
PAGE 7
r 1SPWJEFT BDDFTT UP JOGPSNBUJPO PO B CSPBE SBOHF PG "MMFO #SBEMFZ QSPEVDUT BOE TFSWJDFT r 4JNQMF QSPEVDU TFMFDUJPO JOUFSGBDF IFMQT ZPV FBTJMZ EFUFSNJOF UIF FYBDU DBUBMPHVF OVNCFST r "DDFTT UP DVSSFOU MPDBM MJTU QSJDJOH BOE B DPNQSFIFOTJWF TVQQMFNFOUBM QSPEVDU JOGPSNBUJPO MJTU r "WBJMBCMF GFBUVSFT TVDI BT QSPEVDU TFMFDUJPO XJ[BSET BHSFFNFOU QSJDJOH B TQBSF QBSUT HFOFSBUPS BOE the ability to separate part numbers to view what Rockwell Automation components comprise them Using ProposalWorks can
PAGE 8
Essential Components Rockwell Automation loaded more than 15’000 articles of its product portfolio into the EPLAN data portal and will continue to add many more products in the coming months. This recent add-on enables EPLAN users to select Rockwell Automation products within UIF EFTJHO PG IJHI RVBMJUZ FMFDUSJDBM QSPKFDUT BOE NBDIJOFSZ What is EPLAN? EPLAN is a data-based software solution for electrical control design.
PAGE 9
Power TABLE OF CONTENTS Rockwell Automation Motor Protection Circuit Breakers Motor Circuit Protectors 1-2 Molded Case Circuit Breakers 1-18 Contactors 1-25 Solid State Contactors 1-46 Open Type Starters Enclosed Starters 1-48 Mounting System 1-52 Motor Protection 1-60 ArmorStart Distributed Motor Controllers 1-76 Soft Starters 1-77 Drives 1-82 Control and Load Switches 1-103 Visit our website: www.ab.
PAGE 10
Bulletin 140F, 140A, 140M, 140-CMN Motor Protection Circuit Breakers POWER Product Line Overview Motor Protection Circuit Breakers Bulletin Rated Current, max. Ie Current Rating Short Circuit Protection 140F, MSC Fuse Holder 140A, Manual Motor Starter 140M-C2 140M-D8 32 A 16 A 32 A 32 A 45 A 1…16 A 0.1…16 A 0.1…32 A 1.6…32 A 6.3…45 A Depends on fuse 140M-F8 Overload Protection — Trip Class — 10 10 10 10 CSA 22.2, No.
PAGE 11
Bulletin 140F, 140A, 140M, 140-CMN Product Line Overview Motor Protection Circuit Breakers Bulletin 140-CMN 140M-I 140M-J 90 A 205 A 250 A 630 A 16…90 A 40…205 A 20…250 A 40…630 A Short Circuit Protection Overload Protection Trip Class 10 5…20 10…30 10…30 CSA 22.2, No. 14 UL 508 Manual, Self Protected (Type E) — — — — UL 508 (Group Install.
PAGE 12
Bulletin 140M Motor Circuit Protectors POWER Product Line Overview Motor Circuit Breakers Current range 0.16…1200 A UL Listed/Recognized for motor loads − Short-circuit protection (magnetic trip only) − Overload protection must be provided separately Visible trip indication High current limiting High switching capacity C-Frame D-Frame F-Frame H-Frame J-Frame L-Frame N-Frame Max. Current Ie 2.5 A 32 A 45 A 100 A 250 A 600 A 1200 A Current Rating 0.16…2.5 A 2.
PAGE 13
Bulletin 140A Product Selection / Accessories Manual Motor Starters 140A Current Range 0.1…16 A Motor Protection For Economical Motor Starters Usable as Main Switch Temperature Compensated 3-Pole Manual Motor Starters Rated Operational Current (Ie) Motor Current Adjustment Range Switching of 3-Phase AC Motors AC-2, AC-3 @ 400/415V (50 Hz) [A] [A] [kW] Icu = Ics [kA] Cat. No. 0.16 0.1…0.16 0.02 65 140A-C2A-A16 0.25 0.16…0.25 0.06 65 140A-C2A-A25 0.4 0.25…0.4 0.
PAGE 14
Bulletin 140A Motor Protection Circuit Breakers POWER Accessories Accessories 140A Description For Use With Undervoltage Trip Release For right-side mounting Adds 18 mm to the width of the Manual Motor Starter 220…230V 50 Hz 140A-C-UXF 400V 50 Hz / 460V 60 Hz 140A-C-UXN 415V 50 Hz / 480V 60 Hz 140A 110V 50 Hz / 120V 60 Hz 140A-C-UXKD 140A-C-SXK 24V 50 Hz 220…230V 50 Hz 140A-C-SXF 400V 50 Hz / 460V 60 Hz 140A-C-SXN 415V 50 Hz / 480V 60 Hz 140A 110V 50 Hz / 120V 60 Hz 140A-C-SXB 140A-C-SXD
PAGE 15
Bulletin 140A Accessories Accessories 140A Description For Use With Cat. No.
PAGE 16
Bulletin 140M Motor Protection Circuit Breakers POWER Product Selection Motor Protection Circuit Breakers 140M, 140-CMN Short Circuit Protection — Standard Magnetic Trip (13…14 x Ie) Short Circuit Protection — High Magnetic Trip (16…21 x Ie) Motor Overload Protection — Trip Class 10 Ambient Temperature Compensation Phase-loss Protection Rated Operational Motor Current Switching of 3-Phase AC Motors Current (Ie) Adjustment Range AC-2, AC-3 @ 400/415V (50 Hz) [A] [A] [kW] Icu [kA] Ics [kA] St
PAGE 17
Bulletin 140M Product Selection Motor Protection Circuit Breakers 140M — Spring Clamp Terminals Short Circuit Protection — Standard Magnetic Trip (Fixed at 13 x Ie) Overload Protection — Trip Class 10 (Adjustable Current Range) Ambient temperature compensation Phase-loss protection ATEX for C-Frame Standards and Approvals: IEC, cULus Rated Operational Current (Ie) Motor Current Adjustment Range [A] [A] Switching of 3-Phase AC Motors AC-2, AC-3 @ 400/415V (50 Hz) [kW] Icu [kA] Ics [kA] C
PAGE 18
Bulletin 140M Motor Protection Circuit Breakers POWER Product Selection Motor Protection Circuit Breakers 140M-I, -J, -L Short Circuit Protection — Standard Magnetic Trip (Fixed at 12...15 x Ie) Overload Protection — Trip Class: 140M-I, 5…20 / 140M-J, -L, 10…30 (Adjustable) Cat. No. 140M-I Cat. No. 140M-J Rated Operational Current (Ie) Motor Current Adjustment Range [A] [A] Cat. No. 140M-L Ultimate Interrupting Current [kA] (Icm) 400V 525V Cat. No.
PAGE 19
Bulletin 140M Product Selection Circuit Breakers 140M, Short-Circuit Protection for Starters Short circuit protection — standard magnetic trip (13…14 x Ie) Short circuit protection for 3 component starters — No motor overload protection − separate Bulletin 193-E or 193-T product required for overload and installation protection For Trip Class 10 motor applications Rated Operational Current (Ie) [A] Switching of 3-Phase AC Motors AC-2, AC-3 @ 400/415V (50 Hz) [kW] Icu [kA] Ics [kA] Cat. No.
PAGE 20
Bulletin 140M Motor Circuit Protectors POWER Product Selection Motor Circuit Protectors (MCP) Short Circuit Protection — Magnetic Trip (Adjustable at 3...10 x Ie) Overload Protection — None (Magnetic Trip Only) Cat. No. 140M-H Cat. No. 140M-J Rated Operational Current (Ie) Magnetic Trip Current [A] [A] Cat. No. 140M-L Switching of 3-Phase AC Motors AC-2, AC-3 @ 400/415V (50 Hz) [kW] Icu [kA] Cat. No. 140M-H8P-B30 H-Frame 3 9…33 0.75 (65) 7 21…77 2.
PAGE 21
Bulletin 140M Accessories Accessories 140M, 140-CMN Description Term. No. N.O. N.C. For Use With Cat. No.
PAGE 22
Bulletin 140M Motor Protection Circuit Breakers POWER Accessories Accessories 140M, 140-CMN Description Front-Mounted Auxiliary Contact Internal 2-pole 1 per MPCB Front-Mounted TripIndicating Auxiliary Contact Internal 2-pole 1 per MPCB Description Term. No. 13-14, 23-24 11-12, 21-22 13-14, 21-22 37-38, 43-44 35-36, 41-42 35-36, 43-44 37-38, 41-42 N.O. N.C. For Use With Cat. No.
PAGE 23
Bulletin 140M Accessories Accessories 140M, 140-CMN Description Anti-Tamper Shield Provides protection against inadvertent adjustment of the current setting Lockable Twist Knob For one padlock 5 mm (3/16 in.) Ø shackle Can be locked in OFF position 10 pcs/ pkg Black Red/ Yellow Locking Tag Padlock attachment to the lockable handles Up to three padlocks 4…8 mm (5/16 in.) Ø shackle Padlockable Operating Knob Accepts 8 mm (5/16 in.
PAGE 24
Bulletin 140M Motor Protection Circuit Breakers POWER Accessories Accessories 140M Description IP65 Non-Metallic Enclosure Knockouts for M20 and M25 fittings Suitable for flexible cable with internal ground wire or conduit when externally grounded around the outside of the enclosure (no UL/CSA approval) For Use With Cat. No.
PAGE 25
Bulletin 140M Accessories Accessories 140M Description Spacing Adapter Required for self-protected combination motor controller (Type E) applications of Bul. 140M-C, -D, and -F MPCBs. Not for use with bus bars.
PAGE 26
Bulletin 140UE Molded Case Circuit Breakers POWER Product Line Overview Molded Case Circuit Breakers 140UE Frame Reference Current Range No.
PAGE 27
Bulletin 140UE Product Selection Circuit Breakers 140UE — 160 A, H-Frame Thermal Magnetic Trip 18, 25, 40, 70 kA Breaking Capacity @ 415V (50 Hz) 3-pole, 4-pole Approvals IEC 60947-2, CE, KEMA-KEUR Note: Terminal box lugs and mounting hardware provided as standard 25 kA, Thermal-Magnetic, Adjustable Thermal-Fixed Magnetic Rated Operational Current (In) [A] Thermal Trip Magnetic Trip (Ir = 0.8…1.
PAGE 28
Bulletin 140UE Molded Case Circuit Breakers POWER Product Selection Circuit Breakers 140UE — 250 A, J-Frame Thermal Magnetic Trip Electronic Trip LS, LSI, LSG and LSIG 25, 40, 70 kA Breaking Capacity @ 415V (50 Hz) 3-pole, 4-pole Approvals IEC 60947-2, CE, KEMA-KEUR 40 kA, Assembled Circuit Breakers, Thermal-Magnetic Trip Units Rated Operational Current (In) [A] Thermal Trip Magnetic Trip (Ir = 0.8…1.
PAGE 29
Bulletin 140UE Product Selection Circuit Breakers 140UE — 630 A, L-Frame Thermal Magnetic Trip Electronic Trip LS, LSI, LSG and LSIG 35, 50, 70 kA Breaking Capacity @ 415V (50 Hz) 3-pole, 4-pole Approvals IEC 60947-2, CE, KEMA-KEUR Circuit breakers can be assembled from a circuit breaker frame and a trip unit, or purchased as assembled units. 50 kA, Assembled Circuit Breakers, Thermal-Magnetic Trip Units Rated Operational Current (In) [A] Thermal Trip Magnetic Trip (Ir = 0.8…1.
PAGE 30
Bulletin 140UE Molded Case Circuit Breakers POWER Product Selection Circuit Breakers 140UE — 800 A, M-Frame Thermal Magnetic Trip Electronic Trip LS, LSI, LSG and LSIG 50, 70 kA Breaking Capacity @ 415V (50 Hz) 3-pole Approvals IEC 60947-2, CE, KEMA-KEUR 50 kA, Assembled Circuit Breakers, Electronic Trip Units Adjustment Range [A] Rated Thermal Trip Magnetic Trip Operational Current (In) Ir = 0.5…1.
PAGE 31
Bulletin 140UE Accessories Internal Accessories — Field Installed Description 1 C/O Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers 2 C/O Alarm Contact (AL) Electrically indicates when the breaker is in the "TRIPPED" state Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact 1 C/O (E.M./L.B.) 1 C/O (E.M./L.B.) Cat. No.
PAGE 32
Bulletin 140UE Molded Case Circuit Breakers POWER Accessories External Accessories Description Terminal Shields IP20 Ingress Protection Rating Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required Rotary, Direct Couple Operating Mechanism Rotary handle - IP42 UL Type 1 Breaker mounted Frame Size PQ H 3-pole MCCBs 3-pole MCCBs I J 1 Red/Yellow Handle Rotary, Variable-Depth Operating Mechanism Rotary handle - IP66, UL Ty
PAGE 33
Bulletin 100-K, -KR, -C, -CR, -D, -G, 100S-C, -D Mini-Contactors 100-K / -KR, Contactors 100-C / -CR Bulletin 100-K Type 100-KR 100-C MCS Mini Contactor 100-CR Contactor Rated Current, max.
PAGE 34
Bulletin 100-K, -KR, -C, -CR, -D, -G, 100S-C, -D Contactors POWER Product Line Overview Contactors 100-D, 100-G Bulletin 100-D 100-G Contactor Contactor Rated Current, max.
PAGE 35
Bulletin 100-K, -KR, -C, -CR, -D, -G, 100S-C, -D Safety Contactors 100S-C, 100S-D Bulletin Type Rated Current, max.
PAGE 36
Bulletin 100-K / 100-KR Contactors POWER Product Selection / Accessories Mini-Contactors 100-K / 100-KR Compact size, same dimensions for AC and DC 5, 9, and 12A Contactors rated 690V IP2X Finger Protection Optional integrated surge suppressor Compatible with 193-K bimetallic overload relay Mini Contactors with 3 Main Contacts Rated Operational Current (Ie) [A] AC-3 Ratings for switching AC motors - AC-2, AC-3 AC-1 Auxiliary Contacts 3Ø kW (50 Hz) 400/415V N.O. N.C. Cat. No.
PAGE 37
Bulletin 100-K / 100-KR Accessories Accessories for 100-K / 100-KR Description N.O. N.C. For Use With Cat. No.
PAGE 38
Bulletin 100-K / 100-KR Contactors POWER Accessories Accessories for 100-K / 100-KR Description For Use With PQ Cat. No.
PAGE 39
Bulletin 100-C / 100-CR Contactors 100-C / 100-CR Compact Sizes from 4…55 kW (9…97 A) AC and DC Coil Control Common Accessories for All Contactor Sizes Front and Side Mounting of Auxiliary Contacts Electronic and Pneumatic Timing Modules Space-Saving Coil-Mounted Control Modules Reversible Coil Terminations (Line or Load Side) All Devices Can Be Attached to 35 mm DIN Mounting Rail Contactors with 3 Main Contacts Rated Operational Current (Ie) [A] AC-3 Screw Terminals Ratings for Switching
PAGE 40
Bulletin 100S-C Contactors POWER Product Selection Safety Contactors 100S-C AC / DC control 3 / 4 main contacts Positively guided contacts according to IEC 947-5-1 Mechanically coupled Contactor and Auxiliary contact block Protection against unintended actuation Auxiliary contacts are electronically compatible according to DIN 19240 Contact Configuration Rated Operational Current (Ie) Ratings for Switching AC Motors — AC-2, AC-3, AC-4 [A] 3Ø kW (50 Hz) Δ AC-3 AC-1 400V/415V Main Poles
PAGE 41
Bulletin 100-C / 100-CR Accessories Auxiliary Contacts (For 100-C09…C97 contactors) Description N.O. N.C. Auxiliary Contact Blocks for Front Mounting 2- and 4-pole Quick and easy mounting without tools Electronically-compatible contacts down to 17V, 5 mA Mechanically linked performance between N.O. and N.C. poles and to the main contactor poles (except for L types) Models with equal function with several terminal numbering choices 1L = Late break N.C./early make N.O.
PAGE 42
Bulletin 100-C / 100-CR Contactors POWER Accessories Auxiliary Contacts (For 100-C09…C97 contactors) Description Auxiliary Contact Blocks for Side Mounting with Sequence Terminal Designations 1- and 2-pole Two-way numbering for right or left mounting on the contactor Quick and easy mounting without tools Electronic-compatible contacts down to 17V, 10 mA Mirror contact performance to the main contactor poles 1L = Late break N.C./early make N.O. N.O. N.C. For Use With Cat. No.
PAGE 43
Bulletin 100-C / 100-CR Accessories Control Modules (For 100-C09…C97 contactors), continued Description For Use With On-Delay 0.3…30 s Range Pneumatic Timing Modules Pneumatic timing element contacts switch after the delay time. The contacts on the main control relay continue to operate without delay. 1.8…180 s Range Off-Delay 0.3…30 s Range 1.8…180 s Range On-Delay 0.1…3 s Range 1…30 s Range 10…180 s Range Electronic Timing Modules — OnDelay Delay of the contactor or control relay solenoid.
PAGE 44
Bulletin 100-C / 100-CR Contactors POWER Accessories Control Modules (For 100-C09…C97 contactors), continued Description Voltage Range DC Interface (Electronic) Interface between the DC control signal (PLC) and the AC operating mechanism of the contactor. Requires no additional surge suppression on the relay coils Input: 12V DC Output: 110…240V AC Input: 18…30V DC Output: 110…240V AC For Use With Cat. No.
PAGE 45
Bulletin 100-C / 100-CR Accessories Star-Delta Starter Kits Power wiring kits were designed to aid in the field assembly of open-transition star-delta and reversing starters that use Bulletin 100-C contactors. These kits include line, load (and start-point) connections. 170-PW23 3-Phase Rating (50 Hz) 230V 380/415V 500V Use with Cat. No. 100-... 690V Delta [kW] Star 1M 2M 1S 5.5 8 8 8 C09 C09 C09 7.
PAGE 46
Bulletin 100-C / 100-CR Contactors POWER Accessories Plastic Enclosures for DOL Starters Description For Use With Cat. No.
PAGE 47
Bulletin 100-D Product Selection Contactors 100-D Conventional and Electronic Coils 3 Main Contacts 100-D105 100-D420 100-D860 Contactors with 3 Main Contacts Rated Operational Current (Ie) [A] Ratings for Switching AC Motors — AC2, AC-3, AC-4 Auxiliary Contacts (60 °C) (40 °C) 3Ø kW (50 Hz) AC-3 AC-1 400/415V N.O. N.C. Cat. No.
PAGE 48
Bulletin 100S-D Contactors POWER Product Selection Safety Contactors 100S-D Conventional and Electronic Coils 3 Main Contacts Contactors with 3 Main Contacts Rated Operational Current (Ie) [A] Ratings for Switching AC Motors — AC-2, AC-3, AC-4 60 °C 40 °C 3Ø kW (50 Hz) AC-3 AC-1 400/415V Auxiliary Contacts N.O. Standard Auxiliary Contact Bifurcated Auxiliary Contact N.C. Cat. No. Cat. No.
PAGE 49
Bulletin 100-D, 100S-D ⊗ Coil Voltage Codes for AC Control Conventional Coil -D115…-D180 -D115 24 48 110 120 220-230 230 240 380-400 440 50 Hz [V] K Y D — A — — N — C 60 Hz J X — D — — A — N — 50/60 Hz — — KN — — KF — — — — Electronic Coil w/ EI Interface [V] 550 24 42-64 110-130 208-277 380-415 440-480 380-500 -D115…-D300 50/60 Hz EJ ‡ EY ED EA — — EN -D420 50/60 Hz — — ED EA — — EN -D630…-D860 50/60 Hz — — ED EA EN EB — ⊗ C
PAGE 50
Bulletin 100S-D Contactors POWER Accessories Accessories for 100-D, 100S-D, Continued Description Suppressor Rating RC Module (AC control) for contactors with conventional coil 21...48V, 50 Hz; 24...55V, 60 Hz Suppressor Module for Bul. 100-D Contactors • For limiting surge voltage when coil circuits are interrupted • Supplied as standard on all conventional DC coil contactors and all electronic coil contactors (as part of the supply module or delivered with separate suppressor module) 95...
PAGE 51
Bulletin 100S-D Accessories Accessories for 100-D, 100S-D, Continued For Use With Description Crosssection 50 mm2 Reversing: Input Connection Wye-Delta: MainDelta connection 100-D 100-D 100-D Terminal 115…180 210…420 630…860 Connection 120 mm2 X 350 mm2 50 mm2 Reversing: Output Connection Wye-Delta: DeltaWye connection Reversing: Input Connection Wye-Delta: MainDelta connection Wye-Delta: Neutral bridge X X 100-D180-VLTB Terminal Blocks 100-DTB… X X ⎯ X ⎯ X 100-D180-VYU ⎯ 100-D420-VYU ⎯
PAGE 52
Bulletin 100-G Contactors POWER Product Selection Contactors 100-G 315...710 kW, 400V 350…900 Hp, 460/575V 3-Pole Contactors 4th Add-On Neutral Switching Pole AC and DC Control Horizontal and Vertical Interlocking Mechanical Latching Meets IEC, CE, UL, and cUL Standards and Approvals Contactors with 3 Main Contacts Rated Operational Current Ie [A] Ratings for Switching AC Motors — AC-2, AC-3 AC-1 3Ø kW (50 Hz) 40 °C 400V N.O. N.C. Cat. No.
PAGE 53
Bulletin 100-G Accessories Accessories for 100-G Description For Use With Cat. No. Auxiliary Contact Block For mounting between T1 & T2 or between T2 & T3 Adjustable; provides normal, delayed, or overlapping contacts Max. two blocks/contactor Alternate terminal marking tags included 2 N.O. and 2 N.C. contacts 100-G550…100-G860 100-EF22 Auxiliary Contact Block For side mounting on either side of the contactor Max. four blocks/contactor Alternate terminal marking tags included 1 N.O.
PAGE 54
Bulletin 156-B Solid State Contactors POWER Product Selection Solid-State Contactors The Bulletin 156 Solid-State Contactors are ideal replacements for electro-mechanical contactors where fast and demanding switching of loads such as heaters, solenoids, transformers, and motors, is required.
PAGE 55
Bulletin 156-B Product Selection Three-Phase Current Rating @ 25 °C @ 40 °C [A] [A] 20 16 25 20 32 26 Operational Voltage Control Voltage 24…275V AC, 24…190V DC Housing Size 24…230V AC [mm] Cat. No. Cat. No. 156-B20AA3 156-B20CA3 156-B20AB3 156-B20CB3 45 5…24V DC 24…275V AC, 24…190V DC 90 5…24V DC 24…275V AC, 24…190V DC 45 5…24V DC 48…600V AC 156-B25AA3 156-B25CA3 156-B25AB3 156-B25CB3 156-B32AA3 156-B32CA3 156-B32AB3 156-B32CB3 With fan.
PAGE 56
Bulletin 190S Starters POWER Product Line Overview Open Type Starters Bulletin Type Current Range Motor Range (Max. Kilowatt) Short Circuit Motor Protection Overload Protection: Trip Class Mounting Options Standard Busbar Mount Iso Busbar Mount Panel Mount Major Components 140M (MPCB) 100-C Contactors 193-E Overload Relays Accessories Lockable Knobs Aux/Trip Contacts for (CB) Aux Contacts for Contactor UV/Shunt Trip for Circuit Breaker Product Selection 190S / 191S Compact Starters 0.
PAGE 57
Bulletin 190S Direct On-Line Starters, Bulletin 190S 190S Compact Starter with Bulletin 140M Circuit Breaker and Bulletin 100-C Contactor Short-Circuit Coordination Type "1" and "2" according to IEC 60947-4-1 Complete unit, ready for connection with internal wiring Auxiliary Contacts Wired to Terminal Block at Bottom of Starter Assembly Accessories: Bulletin 140M Circuit Breakers and 100-C Contactors Removable cover IEC and UL/CSA compliant Mounting Versions: - Screw Fixing - Snap Fixing on
PAGE 58
Bulletin 103C, 107C Enclosed Starters POWER Product Selection Direct On-Line 103C / Reversing 107C Enclosure size 2 103C 107C enclosed starters consist of a 140M motor protection circuit breaker, a 100-C contactor (103C), respectively a 104-C reversing contactor (107C) in an impact-resistant molded IP 66 enclosure.
PAGE 59
Bulletin 109C, 105C Product Selection Direct On-Line 109-C / Reversing 105-C Enclosure size 1 109-C enclosed starters are designed using 100-C contactor (9…23 / 43 A) and electronic motor protection overload relays in a molded plastic enclosure (IP 66). Motor protection functionality can be easily expanded with the adoption of side-mounted modules (to order separately). With the appropriate side module the starter can be connected to a network (EtherNet or DeviceNet).
PAGE 60
Bulletin 141A Mounting System POWER Product Line Overview Mounting System Bulletin Type Features 141A Mounting System MCS Iso Busbar Modules – for maximal safety.
PAGE 61
Bulletin 141A Product Selection MCS Iso Busbar Modules System finger proof with load feeders removed Test position with load circuit isolated Consists of a device adapter plate carrying the load feeder components and a busbar module plugging on the busbars Preferably for use with control plug (please order separately) Modules with suppy wires – lengths optimized for MCS 140M motor protection circuit breakers Modules without wire connections – attachable with connection clips to form bigger platf
PAGE 62
Bulletin 141A Mounting System POWER Product Selection MCS Standard Busbar Modules Modules plug directly onto the busbar Suitable for use with control plug Modules with current ratings supply the load current by means of wire or terminal connections Modules can form bigger platforms using the connection clips For plugging on 12, 15, 20, 25, 30 mm x 5/10 mm thick busbars Description Rated Thermal Current Ith [A] 54 54 63 2 63 125 (For 140-CMN) 141A-GS45RR25 141A-GS54RR25 141A-GS54R
PAGE 63
Bulletin 141A Product Selection MCS Standard Busbar Modules >100 A Busbar modules >100 A are screw mounted onto the busbars Sliding nuts for matching the fixing positions of components Versions with terminals on top or bottom For mounting components with current ratings 100 A (supply and load feeders) For plugging on 12, 15, 20, 25, 30 mm x 5/10 mm thick busbars Rated Thermal Current Ith [A] Width [mm] Cat. No.
PAGE 64
Bulletin 141A Mounting System POWER Product Selection MCS Mounting Modules Modules (carrying the load feeder components) for screw mounting or snapping onto top hat (DIN) rails. Control plug optionally (please order separately) Three module lengths for 2- and 3-component starters. Modules can form bigger platforms using the connection clips (see accessories) Modules with PE - terminal for termination of the motor leads incl. PE (for mounting on top hat rails only).
PAGE 65
Bulletin 141A Product Selection Busbar Components, continued Description Busbar Support 60 mm pole center spacing 3-pole with inside mounting holes (meets feeder circuit spacings per UL508A) Busbar Support 60 mm pole center spacing 3-pole with inside mounting holes (approved for branch circuit applications per UL508) Busbar Support 60 mm pole center spacing 4-pole with inside mounting holes Busbar [mm] 12, 20, 30 x 5 or 12, 20, 30 x 10 PQ Cat. No.
PAGE 66
Bulletin 141A Mounting System POWER Product Selection Busbar Components, continued Description Busbar [mm] Supply Module 3-pole 6…50 mm2 (10…1/0 AWG) 12…30 x 5 54 mm wide or (meets feeder circuit spacings per UL 508A) 12…30 x 10 Supply Module or 3-pole TT 35…120 mm2 (2 AWG…250 MCM) 81 mm wide (meets feeder circuit spacings per UL 508A) Supply Module 3-pole 95…185 mm2 (3/0 AWG…350 MCM) 135 mm wide Supply Module 3-pole for round conductors 120…300 mm2 (250…600 MCM) 135 mm wide Supply Module 3-pole for fla
PAGE 67
Bulletin 141A Product Selection Busbar Components, continued Description Busbar [mm] PQ Cat. No. Terminal Cover Finger protection when busbars supplied with single terminals. Attaches directly to busbars. Height: 180 mm, Width: 54 mm 12…30 x 5 or 12…30 x 10 1 141A-BK1 Terminal Cover Finger protection when bus bars are supplied by Cat. No.
PAGE 68
Bulletin 193, 825-P, 809, 813, 814, 817 Motor Protection POWER Product Line Overview Overload Relays Bulletin Type Rated Current (Range) Operating Voltage, Nominal 193-K 193-T1 Miniature Thermal Overload Relay Bimetallic Overload Relays 0.1…12.5 A 0.1…90 A 193-ED 193-EE Electronic Overload Relay, E1 Plus 0.1…45 A 0.
PAGE 69
Bulletin 193, 825-P, 809, 813, 814, 817 Overload Relays Bulletin Type 193-EC1 193-EC2/-EC3 E3 Electronic Overload Relay Rated Current (Range) Operating Voltage, Nominal 0.
PAGE 70
Bulletin 193, 825-P, 809, 813, 814, 817 Motor Protection POWER Product Line Overview MachineAlert Relays Bulletin Type 809S 813S Current Monitoring Relays 813S Voltage Monitoring Relays Single Phase Single Phase Three Phase Operating range Control power 1…10 A AC/DC 2…500V AC/DC 110…690V AC 814S 814S 817S Power Factor Relays Power (kW) Relays Thermistor Monitoring Relay Three Phase Three Phase Three Phase 1…10 A / 380…480V AC 1…10 A / 600…690V AC — 24/48V AC/DC 24/48V AC/DC Selfpo
PAGE 71
Bulletin193-K Product Selection Miniature Bimetallic Overload Relays 193-K Standard Motor Protection for AC and DC Motors Overload Protection Trip class 10A Auxiliary Switch (1 N.O. and 1 N.C.) Phase Loss Sensitivity Manual/Auto Reset Button Test/Stop Button Trip Indicator Mounts to Contactor 100-K05…100-K12 100-K09…100-K12 100-K12 Setting Range [A] ‡ Max. Current Rating Backup gL Fuse [A] IEC Coordination Type Type 1 Type 2 Cat. No. 0.10…0.16 35 1 193-KA16 0.16…0.
PAGE 72
Bulletin 193-T1 Motor Protection POWER Product Selection Bimetallic Overload Relays 193-T1 Overload protection trip class 10 / 10A Phase loss protection Ambient temperature compensation Auxiliary contacts (1 N.O. and 1 N.C.
PAGE 73
Bulletin 193-T1 Product Selection / Accessories Thermal Overload Relays, continued Setting Range [A] ‡§ For Use With Separate mounting required (Panel-mounted device) Max. Back-up gL/gG fuse [A] 50 kA, 690V AC IEC/EN 60947-4-1 Coordination Type 1 Type 2 Cat. No. 35…47 160 100 193-T1DC47P 45…60 200 125 193-T1DC60P 58…75 200 125 193-T1DC75P 72…90 250 160 193-T1DC90P Bulletin 193-T1 overload relays shall not be used with conventional DC controlled contactors.
PAGE 74
Bulletin 193-ED, 193-EE Motor Protection POWER Product Selection Electronic Overload Relays E1 Plus - 193-ED, 193-EE Self-Powered Fast Phase Loss Protection Wide Adjustment Range (5:1) Insert-Molded Power Connections 1 N.O. and 1 N.C.
PAGE 75
Bulletin 193-ED, 193-EE Electronic Overload Relays E1 Plus - 193-ED, 193-EE, continued Description CT Ratio Adjustment Range [A] Cat. No. Three-Phase Devices 193-EE_Z for use with external CT's (193-CBCT_) 30…800 A Current Range Selectable Trip Class (10, 15, 20 or 30) Selectable Manual/Auto-Manual Reset Require one external CT per phase (not supplied) (Rating for protecting relaying, Secondary current 5 A Secondary load 0.
PAGE 76
Bulletin 193-ED, 193-EE Motor Protection POWER Accessories Accessories for Overload Relays, Continued Description For Use With Cat. No. E1 Plus DeviceNet and Protection Module Communicates motor diagnostic data via DeviceNet, includes additional I/O, and provides enhanced motor protection options.‡ 193-EDN E1 Plus EtherNet/IP and Protection Module Communicates motor diagnostic data via EtherNet/IP, includes additional I/O, and provides enhanced motor protection options.
PAGE 77
Bulletin 193-ED, 193-EE Accessories Accessories for Overload Relays, Continued Description Core Balanced Ground Fault Sensor Required when using either an E1 Plus Ground Fault Protection or Ground Fault/Jam Module Required for ground fault protection with the Cat. No. 193-EC3 overload relay For Use With Cat. No. 100-C09…100-C37 193-CBCT1 40 mm (1.57 in.) 100-C09…100-C97 193-CBCT2 63 mm (2.5 in.) 100-C09…100-C97, 100-D115…100D180 193-CBCT3 82 mm (3.25 in.
PAGE 78
Bulletin 193-EC Motor Protection POWER Product Selection E3 and E3 Plus Electronic Overload and Current Monitor Relays DeviceNet™ communication integrated IEC/NEMA configurations True RMS current sensing Single-/three-phase LED indicators Test/reset button Adjustable trip class (5…30) Motor Diagnostics No. No.
PAGE 79
Bulletin 193-EC Product Selection Electronic Motor Protection Relay 193-EC2 – Direct Contactor Mount Mounts to Contactor Adjustment Range [A] 0.4…2 1…5 3…15 5…25 1…5 3…15 5…25 9…45 9…45 18…90 100-C09…100-C23 100-C30…100-C43 100-C60…100-C97 Cat. No.
PAGE 80
Bulletin 193-EC Motor Protection POWER Accessories CT Ratio to FLA Setting Range Correlation CT Ratio 50:5 100:5 150:5 200:5 FLA Setting Range [A] 9…45 18…90 28…140 42…210 CT Ratio 300:5 500:5 600:5 800:5 FLA Setting Range [A] 60…302 84…420 125…630 172…860 CT Ratio 1200:5 2500:5 5000:5 — FLA Setting Range [A] 240…1215 450…2250 1000…5000 — Add-on Accessories Description DeviceNet Configuration Terminal Used to interface with objects on a DeviceNet network. Includes 1 m communications cable (193CB1).
PAGE 81
Bulletin 825-P Product Selection Modular Protection System 825-P 0.
PAGE 82
Bulletin 825-P Motor Protection POWER Accessories Accessories Description Cat. No. M8 connections Set of three 4 x 16 x 102 mm (1/8 x 5/8 x 4-1/64 in.) (125 A max.) Universally applicable Weight: 230 g 825-MVM M8 connections Set of three 4 x 20 x 117 mm (1/8 x 25/32 x 4-39/64 in.) (180 A max.) Universally applicable 825-MVM2 M6 lower connections Set of three For mounting on Bul. 100-D105 and 100-D110 contactors with conventional coil 825-MVS M8 lower connections Set of three For mounting on Bul.
PAGE 83
Bulletin 809, 813, 817, 819 Product Selection MachineAlert Relays 809S, 813S, 814S, 817S Single- and Three-Phase Voltage Monitor Relay Single-Phase Current Monitor Relay Thermistor Monitor Relay Power (kW) Monitor Relay Three-Phase Power Factor (PF) Monitor Relay The MachineAlert Relays family of dedicated function electronic motor protection relays offers stateof-the-art supplementary protective functions that are easily added and applied to motor control circuits.
PAGE 84
Bulletin 280/281, 283, 284 ArmorStart Distributed Motor Controllers POWER Product Line Overview Product type ArmorStart ArmorStart Safety (System requires use of 1732DS Safety I/O Block) Features On-machine starting solution Direct on line, Reversing, Softstarter and VFD Quick disconnect connections for I/O, communications and motor Optional quick disconnect for power and control connections LED status Indication Optional Hand/Off/Auto Keypad On-machine starting solution Direct on li
PAGE 85
Bulletin 150 Product Line Overview Smart Motor Controllers 150-C 150-F Type Bulletin SMC-3 Controller SMC Flex Controller Current Range 200…600V 1…480 A / 831 A 200…600V / 690V ‡ 1…1250 A / 1600 A Soft Start Kickstart Current Limit Dual Ramp Start — Full Voltage — Soft Stop Pump Control — Preset Slow Speed — Linear Speed — SMB Smart Motor Braking — Accu-Stop — Slow Speed with Braking — Integrated Bypass Contacts Inte
PAGE 86
Bulletin 150 Soft Starters POWER Product Selection Smart Motor Controllers SMC-3 1…480/831 A Range Soft Start Current Limit Start Selectable Kick Start Selectable Soft Stop Built-In Overload Protection Built-In SCR Bypass For in-line or inside-the-delta configurations Up to 480V AC Line Connection Delta Connection Current Rating ‡ Motor Power @ 400V AC § Current Rating ‡ [A] [kW] [A] [kW] Cat. No. Cat. No. 1…3 1.1 1.7…5.1 0.55…2.
PAGE 87
Bulletin 150 Accessories Accessories for SMC-3 Description Auxiliary Contact Blocks for side mounting with sequence terminal designations 1- and 2-pole Quick and easy mounting without tools One block per device only N.O. N.C. 1 0 Connection Diagram 150-CA10 2 0 150-CA20 0 1 150-CA01 1 1 150-CA11 Description For Use With Cat. No.
PAGE 88
Bulletin 150 Soft Starters POWER Product Selection Smart Motor Controllers SMC-Flex 1…1250/1600 A Range Soft Start Current Limit Start Dual Ramp Full Voltage Linear Speed Acceleration Preset Slow Speed Soft Stop Options Pump Control Braking Control Up to 480V AC 100…240V AC 50/60 Hz Control ♣ Line Connection ‡§ Delta Connection ‡§ Without Option With Pump Control Option Motor Current [A] 400V [kW] Motor Current [A] 400V [kW] Cat. No. Cat. No. 1…5 2.2 1.7…8.
PAGE 89
Bulletin 150 Accessories Accessories for SMC-Flex Description Cat. No. Protective Modules 480V Protective Module 5…85 A 150-F84 90...180 A 150-F84L 5…85 A 150-F86 108…1250 A 150-F86L IEC line or load terminal covers for 108 and 135 A devices. Dead front protection 150-TC1 IEC line or load terminal covers for 201…251 A devices. Dead front protection 150-TC2 IEC line or load terminal covers for 317…480 A devices.
PAGE 90
PowerFlex 4, 4M, 40, 40P, 400, 70, 700, 753 Drives POWER Product Line Overview PowerFlex 4, 4M, 40 22A… 22F… 22B… 22D… 22C… Type Bulletin PowerFlex 4 PowerFlex 4M PowerFlex 40 PowerFlex 40P PowerFlex 400 Ratings 240V, 1-phase 0.25…2.2 kW 0.25…2.2 kW 0.37…2.2 kW N/A N/A Ratings 200…240V 0.25…4.0 kW 0.25…7.5 kW 0.37…7.5 kW 0.37…7.5 kW 2.2…37 kW Ratings 400…480V 0.37…4.0 kW 0.37…11 kW 0.37…11 kW 0.37…11 kW 2.2…250 kW Ratings 500…600V N/A N/A 0.75…11 kW 0.
PAGE 91
PowerFlex 4, 4M, 40, 40P, 400, 70, 700, 753 PowerFlex 70, 700, 753 Bulletin Type Ratings 240V, 1-phase 20A… 20B… 20F… PowerFlex 70 PowerFlex 700 PowerFlex 753 N/A N/A N/A Ratings 200…240V 0.37…15 kW 0.37…55 kW N/A Ratings 400…480V 0.37…37 kW 0.37…132 kW 0.75…250 kW Ratings 500…600V 0.37…37 kW 0.
PAGE 92
PowerFlex 4 Drives POWER Product Selection PowerFlex 4 AC Drive 0.25…2.2 kW @ 240V 1-phase 0.
PAGE 93
PowerFlex 4 PowerFlex 4 Options Cat. No. External EMC Filter for up to 10 m of Motor Cable EMC Filter PowerFlex 4, 200…240V, 3-phase, 9.5 A, Frame A 22-RF9P5-AS EMC Filter PowerFlex 4/40, 200…240V, 3-phase, 21 A, Frame B 22-RF021-BS EMC Filter PowerFlex 4, 400…480V, 3-phase, 5.
PAGE 94
PowerFlex 4M Drives POWER Product Selection PowerFlex 4M AC Drive 0.25 kW…2.2 kW @ 240V 1-phase 0.
PAGE 95
PowerFlex 4M PowerFlex 4M 400-480V, continued Typical Motor Rating Drive Output (HD) [A] 60 s 3s Frame Size Dimensions Cont. HxWxD Cat. No. 1.5 2.1 2.8 A 174x72x136 22F-D1P5N103 2.5 3.8 5 A 174x72x136 22F-D2P5N103 4.2 6.3 8.4 A 174x72x136 22F-D4P2N103 6 9 12 B 174x100x136 22F-D6P0N103 8.7 13.1 17.4 B 174x100x136 22F-D8P7N103 13 19.
PAGE 96
PowerFlex 40 Drives POWER Product Selection PowerFlex 40 AC Drive 0.37…2.2 kW @ 240V 1-phase 0.
PAGE 97
PowerFlex 40 Options Cat. No.
PAGE 98
PowerFlex 40P Drives POWER Product Selection PowerFlex 40P AC Drive 0.
PAGE 99
PowerFlex 40P Options Cat. No.
PAGE 100
PowerFlex 400 Drives POWER Product Selection PowerFlex 400 AC Drive 0.
PAGE 101
EC2012_Chap_1_EN:1a_Circuit Breakers.qxd 15.11.2011 10:58 Seite 1-93 PowerFlex 400 Options Cat. No. Conversion Kit Converts IP20 drive to IP30, NEMA/UL Type 1 enclosure. Includes conduit box, mounting screws and plastic top panel. Converts IP20 drive to IP30, NEMA/UL Type 1 enclosure. Includes communication option conduit box, mounting screws and plastic top panel.
PAGE 102
PowerFlex 70 Drives POWER Product Selection PowerFlex 70 AC Drive 0.
PAGE 103
PowerFlex 70 Options Cat. No. User Interface Modules Full Numeric LCD 20-HIM-A3 Programming Only LCD 20-HIM-A5 DPI-Port Cable, 1 m 20-HIM-H10 Full Numeric LCD, IP66, includes 3 m cable 20-HIM-C3S Programming Only LCD, IP66, includes 3 m cable 20-HIM-C5S DPI-Port Cable Extension, 0.
PAGE 104
PowerFlex 700 Drives POWER Product Selection PowerFlex 700 AC Drive 0.
PAGE 105
PowerFlex 700 Options Cat. No. User Interface Modules Full Numeric LCD 20-HIM-A3 Programming Only LCD 20-HIM-A5 DPI-Port Cable, 1 m 20-HIM-H10 Full Numeric LCD, IP66, includes 3 m cable 20-HIM-C3S Programming Only LCD, IP66, includes 3 m cable 20-HIM-C5S DPI-Port Cable Extension, 0.
PAGE 106
PowerFlex 753 Drives POWER Product Selection PowerFlex 753 AC Drive 0.75…250 kW, 400V 3-phase (480V 3-phase also available) V/Hz, Sensorless Vector and Flux Vector control Communication modules for a wide range of industrial automation networks Optional multi-lingual LCD HIM with start-up assistance Book-shelf housing with in-built EMC filter and dynamic brake chopper IP00/IP20, Flange Mount, IP54 Conformal Coating Safe Torque-off option conforming to EN954-1 Cat.
PAGE 107
PowerFlex 753 Typical Motor Rating Drive Output [A] 60 s 3s Frame Size Dimensions Cont. HxWxD Cat. No. 1.88 2.1 3.1 3.7 2 543x215x222 20F11GC2P1JA0NNNNN 1.5 3.5 3.5 5.2 6.3 2 543x215x222 20F11GC3P5JA0NNNNN 2.2 5.0 5.0 7.5 9.0 2 543x215x222 20F11GC5P0JA0NNNNN 4.0 8.4 8.7 13 15.6 2 543x215x222 20F11GC8P7JA0NNNNN 5.5 11 11.5 17.2 20.7 2 543x215x222 20F11GC011JA0NNNNN 7.5 15 15.4 16.9 23.1 2 543x215x222 20F11GC015JA0NNNNN 11 21 22 24.
PAGE 108
PowerFlex 753 Drives POWER Product Selection Options Cat. No. User Interface Modules Full Numeric LCD, Enhanced 20-HIM-A6 DPI-Port Cable, 1 m 20-HIM-H10 Full Numeric LCD, Enhanced, IP66, includes 3 m cable 20-HIM-C6S DPI-Port Cable Extension, 0.
PAGE 109
PowerFlex 4, 4M, 40, 40P, 400, 70, 700, 753 External Dynamic Brake Resistors for PowerFlex 4, 4M, 40, 40P, 70, 700 and 753 kW Braking Torque % of Motor Power Duty Cycle % Description Cat. No. 200…240V Drives 0.37 100 % 46 % 0.75 100 % 23 % 1.5 100 % 11 % 2.2 100 % 15 % 4 79 % 11 % 5.5 90 % 10 % 7.
PAGE 110
PowerFlex 4, 4M, 40, 40P, 400, 70, 700, 753 Drives POWER Accessories Line Reactors, 3 % Input Impedance PowerFlex 4/4M PowerFlex 40/40P PowerFlex 400 Cat. No. Cat. No. Cat. No. kW 200…240V 3-Phase Drives 0.2 1321-3R2-A 1321-3R2-A 0.75 1321-3R8-B 1321-3R8-B 1.5 1321-3R8-A 1321-3R8-A 2.2 1321-3R12-A 1321-3R12-A 1321-3R12-A 4 1321-3R18-A 1321-3R18-A 1321-3R18-A 5.5 1321-3R25-A 1321-3R25-A 1321-3R25-A 7.5 1321-3R35-A 1321-3R35-A 1321-3R35-A 11 1321-3R45-A 15 1321-3R55-A 18.
PAGE 111
Bulletin 194C, 194L, 194E Product Line Overview Switch Selection Bulletin Type 194L Control and Load Switches 12…40 A 194E 194E Load Switches 16…100 A Load Switches 125…315 A 12, 16, 20, 25, 40 A Inductive Load-Rated 16, 25, 32, 40, 63, 80, control and load switch 100 A 1 to 16 pole switch Inductive Load-Rated control configurations for load switch OFF-ON, Change-over, 3 or 6 pole switch Star-Delta (Wye- Delta), configurations for OFFReversing, Ammeter, ON or Change-over Voltmeter, and St
PAGE 112
Bulletin 194L Control and Load Switches POWER Product Selection Control and Load Switches 194L Rated current up to 40 A Large selection of functions and switching positions Screws and central fixture ø 22.
PAGE 113
Bulletin 194L Product Selection Switch Bodies for Bulletin 194L, Front/Base Mounting, continued Function I AC-21A [A] Front/Door Mounting Base/DIN Rail Mounting Poles Cat. No. Cat. No. Combinations Actuator / Legend Plate Size Type No.
PAGE 114
Bulletin 194L Control and Load Switches POWER Product Selection Switch Bodies for Bulletin 194L, Front/Base Mounting, continued Function I AC-21A [A] Front/Door Mounting Base/DIN Rail Mounting Poles Cat. No. Cat. No. Combinations Actuator / Legend Plate Size Type No.
PAGE 115
Bulletin 194L Product Selection Switch Bodies for Bulletin 194L, Front/Base Mounting, continued Function I AC-21A [A] Poles Front/Door Mounting Base/DIN Rail Mounting Cat. No. Cat. No. 194L-A12-4251 Combinations Actuator / Legend Plate Size Type No.
PAGE 116
Bulletin 194L Control and Load Switches POWER Product Selection Switch Bodies for Bulletin 194L, Front/Base Mounting, continued Function I AC-21A [A] Poles Front/Door Mounting Base/DIN Rail Mounting Cat. No. Cat. No. Combinations Actuator / Legend Plate Size Type No.
PAGE 117
Bulletin 194L Product Selection Actuators for 194L A B I C N D E L G P, Q S Actuators with Central Fixture ø 22,5 mm Type A Standard Switch B without Legend Plate Key Out Position With Legend Plate 48 x 48 mm Without Legend Plate Cat. No. Cat. No.
PAGE 118
Bulletin 194E Control and Load Switches POWER Product Selection Control and Load Switches 194E Front- and base mounting Finger-proof switch body per IP20 Water spray and dust-proof per IP66 Easily accessible terminals Clearly marked terminals Wide range of accessories 194E (16 A…100 A) 194E (125 A …315 A) Switch Bodies for 194E (16…100 A), Front/Base Mounting Function Front/Door Mounting Base/DIN Rail Mounting Cat. No. Cat. No.
PAGE 119
Bulletin 194E Product Selection: 194E Actuators for Bulletin 194E A E G I L N S Actuators with Central Fixture ø 22,5 mm Type With Legend Plate 48 x 48 mm With Legend Plate 67 x 67 mm Cat. No. Cat. No. A Standard Switch 194L-HC4A-175 E Disconnect Switch 194L-HC4E-175 G Disconnect Switch Without Legend Plate Cat. No.
PAGE 120
Bulletin 194E Control and Load Switches POWER Product Selection 194E Load Switches in Enclosure, Complete Switches - IP66 Metric Conduit Openings Main Switches/Emergency Red/Yellow Poles 3 6 Disconnect Switch Black/Grey AC-21A/ 500V AC-23A/ 400V [A] [kW] Cat. No. Cat. No. 16 7.5 194E-Y16M-1753-4N 194E-Y16M-1753-4G 25 11 194E-Y25M-1753-6N 194E-Y25M-1753-6G 32 15 194E-Y32M-1753-6N 194E-Y32M-1753-6G 40 18.
PAGE 121
Bulletin 194L, 194E Accessories Accessories for Bulletin 194L and 194E Description For Use With PQ 194L-A, 194E-A 5 Cat. No. Plastic Shafts: Length 44 mm 194L-G2830 Length 52 mm Length 57 mm 194L-G3194 194L-G3195 Shaft Extensions Length 24 mm. Max. nos. of pieces per device is 4. 2 pieces per set. Metal Shaft Extensions Locking possibility with provision for locking in position «0» Length 110...235 mm 194L-A, 194E-A 10 194L-A, 194E-A 194L-G3393 1 Length 230...
PAGE 122
Bulletin 194E Control and Load Switches Accessories for Bulletin 194E (up to 100 A) Description Auxiliary Contact Blocks 1 N.O.+ 1 N.C. for left- or right-side mounting Auxiliary Contact Blocks 1 early-make and 1 late-break contact for left- or right-side mounting 17 38 18 37 POWER Accessories Auxiliary Contact Blocks 1 early-break contact for left- or right-side mounting. Auxiliary Contact Blocks 2 N.O.+ 2 N.C.
PAGE 123
Bulletin 194E Accessories Accessories for Bulletin 194E (125 A…315 A) Description For Use With Cat. No. 194E-125...160 194E-AE125-C1 194E-250...315 194E-AE250-C1 194E-125...
PAGE 124
Notes POWER 1-116 Visit our website: www.ab.
PAGE 125
Logic TABLE OF CONTENTS Rockwell Automation Relays and Timers 2-2 Solid State Devices 2-21 Temperature Controllers 2-23 Programmable Controllers 2-24 Circuit Protection 2-34 Surge and Filter Protection 2-47 Power Supplies 2-51 Visit our website: www.ab.
PAGE 126
Bulletin 700 Relays and Timers Product Line Overview Relays 700-HA, HC, HK LOGIC Bulletin 700-HA 700-HC 700-HK General-Purpose Relay Interposing/Isolation Relay Interposing/Isolation Relay Pin-style terminals Standard ON/OFF flag indicator Electrical schematic on face Clear cover for visual inspection Optional Push-to-test and manual override Optional LED Blade-style terminals Standard ON/OFF flag indicator Electrical schematic on face Clear cover for visual inspection Optio
PAGE 127
Bulletin 700 Relays and Timers Product Line Overview Bulletin LOGIC Relays 700-HL, HP 700-HL 700-HL (2-Pole) 700-HP Type Terminal Block Relays 1-Pole Terminal Block Relays 2-Pole Interposing/Isolation Relay Features Ideal for PLC Interfaces Built-in Coil Surge Ideal for interposing isolation Protection applications, Fully Assembled Fully Assembled Relay/Sockets, Standard Relay/Sockets LED, Screw or Spring Clamp Standard LED Terminals, Snap-in 1492 Relay or Solid-state Output Marker Op
PAGE 128
Bulletin 700 Relays and Timers Product Line Overview Timing Relays 700-FE, FS LOGIC Bulletin Type Features Control Outputs: Time Limit Instantaneous Operation Modes: Time Range Supply Voltage Contact Rating at 120V AC Certifications Product Selection 2-4 700-FE 700-FS DIN Rail Timer DIN Rail Timer Only 17.5 mm wide 5 A contact rating Multifunction or single function No additional socket required Only 22.
PAGE 129
Bulletin 700 Relays and Timers Product Line Overview Bulletin Type 700-K 700-KR 700-CF Miniature Control Relay Spring Clamp Terminals — Screw Terminals — 700-CRF Control Relay — — Smallest size Long life Low power consumption Switch up to 690V AC and DC Mechanically linked contacts Timer and latch operations Switch up to 690V AC and DC Bulletin 700S-CF for safety circuits Contact Form 4...
PAGE 130
Bulletin 700-HA Relays and Timers Product Selection General Purpose Relays 700-HA LOGIC 10 A Contact Rating DPDT, 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Options: LED, Push-to-Test and Manual Override, Socket Mounted Surge Suppressor Module, or Multifunction Timer Contact Choices: Standard Silver Nickel, Bifurcated Silver Nickel, or Bifurcated with Gold Plating Bulletin 700-HA Tube Base Relay with PIN Terminals (Single Contact) — Mechanical ON/OFF Indicator included Descriptio
PAGE 131
Bulletin 700-HA Relays and Timers Accessories PQ Cat. No.
PAGE 132
Bulletin 700-HC Relays and Timers Product Selection Interposing/Isolation Relays 700-HC LOGIC 10 A Contact Ratings 2PDT or 4PDT Standard ON/OFF Flag Indicator Blade Style Terminals Choice of Standard Silver Nickel Contacts, or Silver Nickel with Gold Plated Contacts for Low Energy Applications Options: LED, Push-to-Test with Manual Override Option Tungsten UL Approvals 4-Pole: 5A @ 24V DC 2-Pole: 10A @ 24V DC Bulletin 700-HC Miniature Square Base with Blade Terminals Description Wiring Di
PAGE 133
Bulletin 700-HK Relays and Timers Product Selection 8 A/16 A Contact Ratings DPDT/SPDT Plug-in Blade Style Terminals Built-in Retainer Clip in Sockets Choice of Standard Silver Cadmium Contacts or Silver with Gold Plated Contacts Options: LED, Push-to-Test with Manual Override Option 700-HK SPDT LOGIC Interposing/Isolation Relays 700-HK 700-HK DPDT Slim Line Relay with Plug-in Quick Connect Terminations Description Wiring Diagrams Contact Rating Coil Voltage PQ 700-HK36A24 24V AC SP
PAGE 134
Bulletin 700-HL Relays and Timers Product Selection Terminal Block Relays 700-HL, 1-Pole Up to 85% panel space savings vs. traditional relays DIN rail mounting Only 6.2 mm wide (SPDT) Standard LED, Reverse Polarity Protection and Surge Protection Screw Terminals and Spring Clamp Bases LOGIC 700-HLT… 700-HLS… SPDT Relays Assembled Devices Input Voltage Output Type PQ Cat. No. (Screw Terminals) Cat. No.
PAGE 135
Bulletin 700-HL Relays and Timers Product Selection Terminal Block Relays 700-HL, 2-Pole LOGIC Slim build of only 14mm wide that meets thedemand for panel space-savings Standard built-in reverse DC polarityprotection ensures DC coil devices are notdamaged if improper polarity is connected Separation of coil and contact terminals Snap in marker system One piece housing construction in terminal area to prevent screwdriver blade from catching on housing seam 10 Amp Contact Rating DPDT Relays As
PAGE 136
Bulletin 700-HP Relays and Timers Product Selection "Pin Style” Relays 700-HP (PCB) 8 A Contact Ratings DPDT/ (2 c/o) Contacts Plug-in PIN Style (PCB) Terminals (5 mm Pinning) Choice of Standard Silver Nickel Contacts, or Silver Nickel with Gold Plated Contacts Options: None LOGIC Slim Line Relay with "PIN Style" Terminations Description Wiring Diagram Contact Rating Coil Voltage PQ Cat. No.
PAGE 137
Bulletin 700-FE Relays and Timers Product Selection Economy Timing Relays 700-FE Adjustable Function and Timing Range Timing Relays DIN Rail Mounted Without Cost of Socket 17.5 mm wide, Multi-Function or Single Function Available as 1 N.O. or SPDT Contact Output, 5A Timing Ranges From 0.05s…10.0h Operating Mode Contact Output Timing Range Input Voltage Cat. No. 1 N.O. 0.05 s…10 hr (6 settings) ♣ 24V AC/DC 110…240V AC 50/60 Hz 700-FEA1TU22 SPDT (1 C/O) 0.
PAGE 138
Bulletin 700-FS Relays and Timers Product Selection Electronic High Performance Timing Relays 700-FS Adjustable Function and Timing Range Timing Relays DIN Rail Mounted without Cost of Socket 22.5 mm Wide Multifunction or Single Functions Available as SPDT or DPDT Contact Output, 8 A Timing Ranges From 0.05s…60h LOGIC Single Function (With SPDT 1 C/O contact) Operating Mode Timing Range Input Voltage Cat. No. 0.05 s…60 h 24…48V DC 24…240V AC, 50/60 Hz 700-FSA3UU23 0.
PAGE 139
Bulletin 700-FS Relays and Timers Product Selection Multi-Function Relays LOGIC (This device offers you the flexibility of selecting one of 8 single timing functions.) 700-FSM Operating Mode Contact Output Multi-function timing relays Eight Single-functions: A, B, C, D, E, F, I, and L ON and OFF function additional (for installation and maintenance) Note: See connection diagrams for further description. (SPDT) 1 C/O Timing Range Input Voltage Cat. No. 0.
PAGE 140
Bulletin 700-FS Relays and Timers Product Selection Special Function Relays LOGIC 700-FSH Operating Mode 700-FSY Contact Output Flasher (Repeat Cycle Starting with Pulse or Pause) Timing Range Input Voltage Cat. No. 0.05 s…60 h 24…48V DC 24…240V AC 50/60 Hz 700-FSH3UU23 2 x 0.05 s…60 h (2 ranges) 24…48V DC 24…240V AC, 50/60 Hz 700-FSH3VU23 0.
PAGE 141
Bulletin 700-K Relays and Timers Product Selection Miniature Control Relays 700-K IEC Compact Industrial Relay IP2X Finger Protection Bifurcated Contacts for low level signals Optional integrated coil protection diode 700-KR 700-K AC-12 AC-15 (A600) Ie [A] Ie [A] 40 °C 60 °C 24/48V 230V 400V LOGIC AC / DC Coil Voltage Control Relays Contacts 500V 690V N.O. N.C. PQ Cat. No.
PAGE 142
Bulletin 700-K Relays and Timers Accessories Accessories 700-K / 700-KR Description N.O. N.C. For Use With Cat. No.
PAGE 143
Bulletin 700-CF/CRF Relays and Timers Product Selection IEC Industrial Relays (Finger Safe Design) Positively-Guided/Mechanically-Linked Contacts per IEC 60947-5-1 Annex L on Main and Auxiliary Contacts Gold Plated, Bifurcated Version for Low Level Switching Applications Master Control Relay Version rated 15 A (AC-15) Solid-State and Pneumatic Timing Modules 4…10 Poles 12…600V Coils LOGIC Control Relays 700-CF / 700-CRF 700-CF 700-CRF Standard Auxiliary Contact Bifurcated Auxiliary Con
PAGE 144
Bulletin 700-CF/CRF Relays and Timers Accessories Auxiliary Contacts for 700-CF, 700-CRF Description N.O. N.C. For Use With Cat. No. Screw Terminals LOGIC Auxiliary Contact Blocks for Front Mounting 2- and 4-pole Quick and easy mounting without tools Electronically-compatible contacts down to 17V, 5 mA Mechanically linked performance between N.O. and N.C.
PAGE 145
Bulletin 700-SH Solid State Devices Product Line Overview Solid State Devices 700-SH Features Load Type Load Voltage Range Load Current Max.
PAGE 146
Bulletin 700-SH Solid State Devices Product Selection Hockey Puck Relays for DIN Rail Mounting 700-SH 100 A max. continuous load (output) current with appropriate heat sink 264V AC, 530V AC, or 660V AC max.
PAGE 147
Bulletin 900-TC Temperature Controllers Product Line Overview Bulletin Dimensions: Height Width Depth 900-TC8 900-TC16 900-TC32 96 mm 48 mm 78 mm 48 mm 48 mm 78 mm 24 mm 48 mm 100 mm Sample Rate 250 or 500 ms Indication Accuracy LOGIC Temperature Controllers 900-TC 500 ms ±0.5% PV ±1 digit max.
PAGE 148
Bulletin 2080, 1763, 1766 Programmable Controllers Product Line Overview Bulletin 2080 Micro810 LOGIC Type 20 pt 12 pt 26 pt Base Unit Embedded 120/240 AC and 12/24 DC options via AC and DC Power Supply Modules Power Supply Base Programming Port Embedded USB 2.0 (non-isolated) Standard USB printer cable. ‡ Base Serial Port None RS-232 / 485 non-isolated 0 Base Unit Plug-In Slots 1 Base 100KHz Motion Axis or HSC max.
PAGE 149
Bulletin 2080, 1763, 1766 Programmable Controllers Product Line Overview Type 2080 Micro830 10 pt 16 pt 24 pt Micro850 ‡ 48 pt 24 pt 48 pt Base Unit Power Supply Base Unit has embedded 24V DC Power Supply Optional External 120/240V AC, 12V DC/24V AC power supply Embedded USB 2.
PAGE 150
Bulletin 2080, 1763, 1766 Programmable Controllers Product Line Overview Bulletin 1763 1766 MicroLogix 1100 MicroLogix 1400 4K / 4K 128k bytes / 64k bytes 128kB/ Recipe: up to 64kB Back-up Memory Module Battery Back-up I/O Up to 32 Type LOGIC Memory User Program/Data Space Data Logging/Recipe Storage With embedded I/O modules Up to 80 I/O with embedded I/O modules Up to 128 Additional Functionality Analog Trim Potentiometers PID High-Speed Counter (24V DC input) Real Time Clock S
PAGE 151
Bulletin 2080 Programmable Controllers Product Selection Micro810 LOGIC Functions as a smart relay with high current relay outputs with the programming capabilities of a micro PLC Nano-sized footprint As part of the Micro800 family, the Micro810 controller shares programming environment, plug-ins and accessories 12-pt form factor provides: − 2 of the 8 A outputs eliminate the need for external relays − Program download via USB programming port (adapter required) − DC models allow 4 inputs to func
PAGE 152
Bulletin 2080 Programmable Controllers Product Selection Micro830 LOGIC Designed for standalone machine control applications which require simple motion, flexible communications and I/O capabilities with up to five plug-ins Different controller types sharing same form factor and accessories Form factor based on number of I/O points embedded in the base: 10, 16, 24, or 48 Controllers include built-in support for up to 3 axes of motion − As many as three Pulse Train Outputs (PTO) − As many as six
PAGE 153
Bulletin 2080 Programmable Controllers Plug-In Modules / Accessories Micro800 Plug-In Modules Description Four Channel V/I Analog Input Unipolar 0-20mA, 0-10V, 12bits (non-isolated) LOGIC Extend the functionality of embedded I/O without increasing the footprint of your controller. Improve performance by adding additional processing power or capabilities. Add additional communication functionality.
PAGE 154
Bulletin 1763 Programmable Controllers Product Selection MicroLogix 1100 LOGIC Memory Size and Type: - 8K flash memory: 4K user program, 4K user data - 64K recipe memory out of the 128K data logging Embedded LCD display with navigation keys and embedded RTC: - 4 x 12 Text display 2 Communication ports: - 1 RS232/485 port - 1 RJ45 EtherNet IP port for peer to peer messaging Throughput: - 2 ms (for a typical 1 K word user program) Online Editing / Programming Ten digital inputs, two analog inpu
PAGE 155
Bulletin 1766 Programmable Controllers Product Selection MicroLogix 1400 LOGIC Memory Size and Type: - 10K user program, 10K user data - 64K recipe memory out of the 128K data logging Embedded LCD display with navigation keys and embedded RTC: - 4 x 12 Text display Three communication ports: - One isolated RS232C/RS485 combination port - One non-isolated RS232C port - One RJ-45 port for 10/100 Mbps EtherNet/IP peer-to-peer messaging Online editing / programming Higher I/O count, faster High Spe
PAGE 156
Bulletin 1763, 1766 Programmable Controllers Product Selection Expansion I/O Modules LOGIC Description Cat. No.
PAGE 157
Bulletin 2080, 1763, 1766 Programmable Controllers Software / Accessories Programming and Configuration Software for Micro800 and MicroLogix Controllers Connected Components Workbench Software LOGIC Connected Components Workbench™ programming and configuration software supports your Micro800™ controllers and several of the Allen-Bradley® component-class products in your small machine. This software leverages proven Rockwell Automation® and Microsoft® Visual Studio® technologies.
PAGE 158
Bulletin 1492-RCD, 1492-SP, 1492-FB, 1489, 140F Circuit Protection Product Line Overview Device Selection LOGIC Bulletin Type Features Number of Poles Rated voltage 1492-RCD 1492-SP Residual Current Device Miniature Circuit Breaker True IP2X finger-safe design (front) For applications in which AC and pulsating DC fault currents are likely to appear, nonselective and non-delayed Designed to prevent unwanted tripping caused by switching electronic circuit devices Auxiliary and Signal contact
PAGE 159
Bulletin 1492-RCD, 1492-SP, 1492-FB, 1489, 140F Circuit Protection Product Line Overview Bulletin 1489 Type 1492-FB 480Y/277V AC 240V AC 0.5…25 A 0.5…40 A True IP2X finger-safe design (front) 10,000 A interrupt A postively trip-free mechanism (breaker operation cannot be defeated by holding the handle in the ON position) Superior shock and vibration resistance capabilties Mounts on DIN Rail IEC 60947-2 - 0.5...
PAGE 160
Bulletin 1492-RCD, 1492-SP, 1492-FB, 1489, 140F Circuit Protection Product Line Overview Device Selection LOGIC Bulletin 140F Type Features Product Selection 2-36 MCS Fuse Holders Available for UL Class CC or Midget Fuses, with or without blown fuse indication Lockable in the open position Compatible with 140M accessories Compact busbar and connectors of contactors 100C and 100M 1 NO/ 1 NC Auxiliary Contact, early break NC Provides capability for dropping out contactor before breakin
PAGE 161
Bulletin 1492-RCD Residual Current Devices Product Overview Residual Current Devices Bulletin 1492-RCD Earth Leakage Detectors for IEC Applications. The Bulletin 1492-RCD line includes Residual Current Devices for earth leakage detection to IEC standards. These devices are used in association with miniature circuit breakers (1492-SP).
PAGE 162
Bulletin 1492-SP Miniature Circuit Breakers Product Selection Miniature Circuit Breakers Bulletin 1492-SP LOGIC 1492-SP1 1492-SP2 1492-SP3 1492-SP1…-N 1492-SP3…-N Energy Limiting Design - Protects Downstream Components Better than Conventional Breakers During Short Circuits Field Mountable Options for Selective Applications IP2x Finger-Protection (Front) International Approvals - CE Marked, and Meets UL, CSA, and IEC (VDE, GL) Standards for Worldwide Acceptance Ratings to 480Y/277V AC @ 24
PAGE 163
Bulletin 1492-SP Miniature Circuit Breakers Product Selection Miniature Circuit Breakers, Trip Curve C Inductive, 5…10 In 1 Pole 1-Pole + Neutral Module ‡ 2-Poles ‡ 3-Poles ‡ 3-Pole + Neutral Module ‡ Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
PAGE 164
Bulletin 1492-SP Miniature Circuit Breakers Accessories Description Diagram PQ Cat. No. 1 1492-ASPH3 1 1492-ASPHH3 1 1492-ASPHS3 50…115V AC 1 1492-ASPU115 110…240V AC 1 1492-ASPU230 110…415V AC (110…230V DC) 1 1492-ASPA1 12…110V AC (12…60V DC) 1 1492-ASPA2 Mounting Rails DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m 10 199-DR1 DIN hi-rise symmetrical rail 1 m, 35 mm x 7.5 mm, 57.4 mm (2.26 in.
PAGE 165
Bulletin 1492-SP Miniature Circuit Breakers Accessories Rated Operational Current (Ie) [A] PQ Cat. No. For max 25 mm2 wire 1 1492-ASPCLT25 For max 35 mm2 wire 1 1492-ASPCLT35 Description No.
PAGE 166
Bulletin 1492-SP Miniature Circuit Breakers Accessories Description No. of 1492-SP Rated Operational Current (Ie) [A] PQ Cat. No.
PAGE 167
Bulletin 1489 Miniature Circuit Breakers Product Selection Miniature Circuit Breakers Bulletin 1489 LOGIC IP2x Finger-Protection (Front) North America certifications: UL 489, CSA 22.2 No. 5.1 International standards: CE Marked, and IEC (VDE) standards for worldwide acceptance Ratings: UL/CSA — max. 480Y/277V AC – 10,000 A interrupt rating; IEC — max.
PAGE 168
Bulletin 1489 Miniature Circuit Breakers Accessories Miniature Circuit Breaker Accessories Description CSA/UL Certifi- IEC 60947-2 EN/IEC Max. cations Compliance CE Volt. UL/CSA Max. Volt. Connection Cat. No. LOGIC Lockout Attachment Yes Yes — — — — Auxiliary Contact, 2 sets, each are Form C, 1 N.O. & 1 N.C. Yes Yes — 3 A, 250V AC (AC13) 0.5 A, 110V DC 2 A, 240V AC 0.5 A, 110V DC Cable 1489-AAHH3 Auxiliary/Signal Contact, each are Form C, 1 N.O. & 1 N.
PAGE 169
Bulletin 1492-FB DIN Rail Mounting Fuse Holders Product Selection DIN Rail Mounting Fuse Holders 1492-FB LOGIC EN/IEC 60529 Finger Protection — Dead Front Construction The Patented Handle Design Isolates the Fuse from Power When Handle is Opened for Fuse Insertion or Removal Optional Blown Fuse LED Indicator — Allow for Easy Troubleshooting of Electrical Circuits Easy Insertion/Removal of Fuses, No Special Tools Required Mounts on Standard 35 mm DIN Rail (A-B p/n 199-DR1) DIN Rail Mounting Fus
PAGE 170
Bulletin 140F MCS Fuse Holders Product Selection MCS Fuse Holders 140F LOGIC Available for UL Class CC or Midget Fuses and IEC 10 x 38 mm fuses, with or without blown fuse indication Lockable in the open position Compatible with 140M accessories Compact busbar and connectors of contactors 100C and 100M 1 NO/ 1 NC Auxiliary Contact, early break NC Provides capability for dropping out contactor before breaking current on fuse Late make NO provides positive indication that power circuit is ope
PAGE 171
Bulletin 4983 Filter and Surge Protective Device Product Line Overview Bulletin Type Features AC Network 4983-DH 4983-DS 4983-DD 4983-DC DIN Rail Heavy-Duty AC Surge Protective Device DIN Rail Standard Duty AC Surge Protective Device DIN Rail Dataline Surge Protective Device DIN Rail Combination Filter and Surge Protective Device High energy absorption capability Visual fault indicator linked to internal thermal disconnect Automatic trigger for SPD replacement Remote signaling Compact
PAGE 172
Bulletin 4983 Filter and Surge Protective Device Product Selection DIN Rail Heavy-Duty AC Surge Protective Devices, 4983-DH Bulletin 4983-DH is a heavy-duty surge protector. This SPD combines a high-energy varistor (MOV) network with a gas discharge tube to increase performance in protection level, life duration, and suppression of leakage current. The Bulletin 4983-DH product is connected in parallel and can be located in the feeder circuit.
PAGE 173
Bulletin 4983 Filter and Surge Protective Device Product Selection DIN Rail AC Surge Protective Devices, 4983-DS Bulletin 4983-DS offers a number of options to meet your basic surge protection needs. The Bulletin 4983-DS products are connected in parallel and use an MOV to clamp high-voltage surges. The Bulletin 4983-DS devices are primarily used in the main electrical panel for the protection of 1- and 3-phase systems. Voltage Range Connection Mode Max.
PAGE 174
Bulletin 4983 Filter and Surge Protective Device Product Selection DIN Rail Dataline Surge Protective Devices, 4983-DD Bulletin 4983-DD SPDs are designed to protect industrial communication networks. This device uses a combination of 3-electrode gas discharge tubes and fast-clamping diodes. Typical applications include industrial processing equipment, transmission systems, I/O cards, probes, actuators, and displays.
PAGE 175
Bulletin 1606, 1609 Power Supplies, UPS Product Line Overview Bulletin Type Output Power Efficiency Output Voltage/ Secondary Voltage Rated Output Current (24V DC) Operating Temperature Range 1606-XLP 1606-XLS 1606-XLE Switched Mode Power Supply Single/Dual-Phase Switched Mode Power Supply Single/Three-Phase Switched Mode Power Supply Single/Three-Phase 15…100 W 80...960 W 80...960 W 80…90% 91.6…95% 90…92% 5, 10...12, 12, 15, 24, 48V DC 12…15, 24, 30, 36…42, 48V DC 24, 48V DC 1.3…4.2 A 3.
PAGE 176
Bulletin 1606, 1609 Power Supplies, UPS Product Line Overview Uninterruptible Power Supplies Bulletin LOGIC Type Output Power 1609-U 500 VA/325 W Input Voltage/ Primary Voltage Efficiency 1609-P 1609-S Uninterruptible Power Supply Uninterruptible Power Supply Uninterruptible Power Supply 3…10 kVA 350 VA/280 W 120, 208/230V AC 96% Output Voltage/ Secondary Voltage 86% 96% 120, 208/230V AC Rated Output Current 4.12 A 11…48 A 2.
PAGE 177
Bulletin 1606 Power Supplies Product Selection Power Supplies 1606 LOGIC Low inrush current PFC choke Wide range input; auto select input Superior overload design (continuous current, no hiccup) NEC Class 2 'Limited Power' option Selectable operating mode (single/parallel) Superior efficiency and temperature rating Single Phase Power Supplies Output Power [W] Output Voltage [V DC] Output Current [A] Input Voltage Special Features Parallel Meets EN Operation 61000-3-2 (inclined (PFC Ch
PAGE 178
Bulletin 1606 Power Supplies Product Selection Single Phase Power Supplies, continued Output Output Output Power [W] Voltage Current [A] Input Voltage Special Features Parallel Operation (inclined Charact.) Cat. No. 1606-XLS Performance Single Phase 80 24…28 3.
PAGE 179
Bulletin 1606 Power Supplies Product Selection / Accessories Power Supplies 1606, continued Output Output Power Output Current [W] Voltage [A] Input Voltage Parallel Meets EN Operation 61000-3-2 (inclined (PFC Charact.) Harmonics) Special Features Cat. No. 960 40 23…27. 8 22.5…2 7.8 45…54 5.1 10 8 92 24 3.8 91 24 3.8 192 24 8 — 480 60 120 240 20 5 10 384 480 24…28.8V DC 2.5 24 16 Vin 1 .
PAGE 180
Bulletin 1609 Power Supplies, UPS Product Selection Uninterruptible Power Supplies Bulletin 1609-U Series Rugged industrial design DIN Rail mountable or back-of-panel mountable Remote monitoring/configuration Line interactive LOGIC Output Power Dry Contact I/O Elevated temperature performance (up to 50°C) Comprehensive network management Pure sine wave output Input Voltage 120V AC 500VA (325 W) 208/230V AC Operating Temperature 0…40 °C 0…50 °C 0…40 °C 0…50 °C Without Network Managemen
PAGE 181
Operator Interface TABLE OF CONTENTS Rockwell Automation Control and Indicating Units 3-2 Graphic Terminals 3-45 Visit our website: www.ab.
PAGE 182
Bulletin 800B, 800F Control and Indicating Units Product Line Overview Bulletin Description Mounting Hole Size Material 800B 800F 800FD 800FC Push Buttons Push Buttons Monolithic Push Buttons Pendant Stations 16 mm 22.5 mm 22.5 mm 22.
PAGE 183
Bulletin 800P Control and Indicating Units Product Line Overview Description 855P 855PC Panel Mount Sounder Panel Mount Sounder with LED 855PS 855PB 855PD Panel Mount Strobe Panel Mount Selectable Steady or Flashing LED Panel Mount Dual Circuit Alarms Mounting Hole Size 22.5 mm or 30.
PAGE 184
Bulletin 855T, 855E, 855D Control and Indicating Units Product Line Overview Bulletin 855T 855E 855D Control Tower Stack Lights 70 mm Control Tower Stack Lights 50 mm Control Tower Stack Lights 30 mm Environmental Ratings UL Type 4/4X/13 on all bases, lights piezo style sound and caps (sound and light with sound combo modules are UL Type 12, IP54) Indoor and outdoor use IP65 UL Type 4/4X/13 on all bases, lights and caps sound modules Indoor and outdoor use IP65 UL Type 4/4X/13 In
PAGE 185
Bulletin 855F, 855H, 855B Control and Indicating Units Product Line Overview Description 855F Pre-assembled and Prewired Tower Lights 70 mm 855H General Purpose Horns and High Performance Horns (with or without Beacons) 855B Mini Square Beacons IP56/Type 13 &13R IP66/Type 13 (Horn w/Beacon: IP56/Type 13) Bases available in: 24V 10-30V DC, 24V AC 50/60 12V AC/DC, 24V AC/DC, Voltages Available AC/DC, 240V AC as Hz, 110V AC 50/60 Hz, 110V AC 50/60Hz, 230V standard offerings 230V AC 50/60 Hz AC 50/6
PAGE 186
Bulletin 800BS, 855BM, 855BL, 855W Control and Indicating Units Product Line Overview Bulletin Description 855BS (LED) 90 mm 90 mm OPERATOR INTERFACE 75 W or LED Base plate available in: 24V AC/DC, 120V AC, 240V AC as standard offerings 15 J or 35 W Halogen 31 J or 50 W Halogen LED — UL Type 4/4X/13, IP65 Indoor and outdoor use UL Type 4/4X/13, IP65 –25 to…+60 °C –25 to…+60 °C except Rotating and steady Halogen is –25…+50 °C –25 to…+60 °C except Rotating is –25…+50 °C –25 to…+60 °C except Ro
PAGE 187
Bulletin 800B Control and Indicating Units Product Selection Push Buttons & Pilot Light Operators Round Square Rectangle Large Square Cat. No. Cat. No. Cat. No. Cat. No. Momentary, push button/pilot light 800B-EPA 800B-EPB 800B-EPC 800B-EPD Maintained, push button 800B-EAA 800B-EAB 800B-EAC 800B-EAD Please order Lenses and LED's separately. Selector Switch Operators Maintained Return from Right Keyed, Maintained Keyed, Return from Right Cat. No. Cat. No. Cat. No. Cat. No.
PAGE 188
Bulletin 800B Control and Indicating Units Product Selection Illumination ‡ Description Lamp Color Green LED bulb Red White Lamp Voltage Cat. No. 12…24V AC/DC 800B-N3G 120V AC 800B-N5G 12…24V AC/DC 800B-N3R 120V AC 800B-N5R 12…24V AC/DC 800B-N3W 120V AC 800B-N5W Not available for 6V AC/DC. ‡ Incandescent bulbs available. Please visit our website: www.ab.com/catalogs Contact Block/Latch Module OPERATOR INTERFACE Description Cat. No. 1 N.O./1 N.C. snap action 800B-PS11 2 N.O./2 N.
PAGE 189
Bulletin 800B Control and Indicating Units Accessories Cat. No. 800B-ABZB Rockwell Automation Description Cat. No. Mounting ring wrench 800B-AW2 Bulb removal tool 800B-ALR1 Lens removal tool 800B-ALR2 Hole plug 800B-N2 Printed circuit board pin socket 800B-APCB Emergency stop legend plate 800B-15YE112 Square bezel 800B-ABZB Rectangle bezel 800B-ABZC Large square bezel 800B-ABZD Visit our website: www.ab.
PAGE 190
Bulletin 800F Control and Indicating Units Product Selection Complete Units Non-Illuminated Push Buttons, Momentary (Screw Terminal Connections) Type of Contact Description N.O. N.C. Color Construction Cat. No.
PAGE 191
Bulletin 800F Control and Indicating Units Product Selection Complete Units , Continued Non-Illuminated Selector Switches (Screw Terminal Connections) Type of Contact N.O. N.C. Type — 2 position, maintained 1 1 2 position, maintained 1 — 2 position, maintained 1 1 2 position, maintained 2 — 3 position, maintained Plastic operator/plastic latch 800FP-SM32PX20 2 — 3 position, maintained Metal operator/metal latch 800FM-SM32MX20 1 Standard lever, black Construction Cat. No.
PAGE 192
Bulletin 800F Control and Indicating Units Product Selection Momentary Push Button Operators, Non-Illuminated — Flush, Extended Flush Operator Extended Operator Flush Extended Plastic Metal Plastic Metal Color Cat. No. Cat. No. Cat. No. Cat. No.
PAGE 193
Bulletin 800F Control and Indicating Units Product Selection Momentary Push Button Operators, Illuminated — Flush, Extended Flush Operator Extended Operator Extended Metal Plastic Metal Color Cat. No. Cat. No. Cat. No. Cat. No.
PAGE 194
Bulletin 800F Control and Indicating Units Product Selection Pilot Lights Plastic Pilot Light Metal Pilot Light OPERATOR INTERFACE Plastic Metal Color Cat. No. Cat. No.
PAGE 195
Bulletin 800F Control and Indicating Units Product Selection 800FD Monolithic 2-Position Push-Pull/Twist-to-Release Mushroom Operators, Non-Illuminated Contacts Cat. No. 1 N.C. 800FD-MT44X01 2 N.C. 800FD-MT44X02 1 N.C., 1 N.O. 800FD-MT44X11 Red OPERATOR INTERFACE Color 800FD Momentary Push Button Operators, Non-Illuminated Contact Configuration Operator Type Flush 1 N.O. 1 N.C. 1 N.O. & 1 N.C. Cap Color Text Cat. No. Cat. No. Cat. No.
PAGE 196
Bulletin 800F Control and Indicating Units Product Selection 800FD Selector Switch Operators, Non-Illuminated Operator Type Maintained OPERATOR INTERFACE Spring Return From Both 2-Postition 3-Postition Contact Configuration Cat. No. Cat. No. 1 N.O. 800FD-SM22X10 — 1 N.C. 800FD-SM22X01 — 2 N.O. 800FD-SM22X20 800FD-SM32X20 2 N.C. 800FD-SM22X02 800FD-SM32X02 1 N.O. & 1 N.C. 800FD-SM22X11 800FD-SM32X11 2 N.O. — 800FD-SB32X20 2 N.C. — 800FD-SB32X02 1 N.O. & 1 N.C.
PAGE 197
Bulletin 800F Control and Indicating Units Product Selection Non-Illuminated Selector Switches, 2-Positions Target Table and Operator Position Switching Angle Standard Knob Contact Type N.O. O X N.C. X O Note: X = Closed/O = Open Standard Knob Plastic Metal Color Cat. No. Cat. No. Black with White Insert 800FP-SM22 800FM-SM22 Illuminated Selector Switch Operators, 2-Positions ‡ Target Table and Operator Position Switiching Angle Contact Type N.O. O X N.C.
PAGE 198
Bulletin 800F Control and Indicating Units Product Selection Non-Illuminated Selector Switches, 3-Positions Target Table and Operator Position (Switching angle 60°), see publication 800F-SG001… Standard Knob Knob Lever Operator Type Color Standard Knob Plastic Metal Cat. No. Cat. No. 800FP-SM32 800FM-SM32 800FP-SB32 800FM-SB32 Black with White Insert OPERATOR INTERFACE Operator Type Color Knob Lever Plastic Metal Cat. No. Cat. No.
PAGE 199
Bulletin 800F Control and Indicating Units Product Selection Illuminated Selector Switch Operators, 3-Positions Target Table and Operator Position (Switching angle 60°), see publication 800F-SG001… Standard Knob Green Plastic Metal Cat. No. Cat. No. 800FP-LSM33 800FM-LSM33 800FP-LSR33 800FM-LSR33 800FP-LSL33 800FM-LSL33 800FP-LSB33 800FM-LSB33 Operator Type Red Plastic Metal Cat. No. Cat. No.
PAGE 200
Bulletin 800F Control and Indicating Units Product Selection Key Operated Selector Switches, 2-Positions, Non-Illuminated ‡ Target Table and Operator Position Switching Angle Key Selector Switch Contact Type N.O. O X N.C. X O Key Selector Switch Note: X = Closed/O = Open Operator Type Key Selector Switch Operators OPERATOR INTERFACE Plastic Metal Key Removal Position Cat. No. Cat. No.
PAGE 201
Bulletin 800F Control and Indicating Units Product Selection Emergency Stop Operators Non-Illuminated Twist-to-Release, Push-Pull Emergency Stop 60 mm, Non-Illuminated, Twist-to-Release Emergency Stop 40 mm, Non-Illuminated, Twist-to-Release Plastic Metal Color Size [mm] Cat. No. Cat. No. 30 800FP-MT34 800FM-MT34 Red 40 800FP-MT44 800FM-MT44 60 800FP-MT64 800FM-MT64 Push-Pull (Trigger Action) Plastic Metal Color Size [mm] Cat. No. Cat. No.
PAGE 202
Bulletin 800F Control and Indicating Units Product Selection Emergency Stop Operators, continued Illuminated Twist-to-Release, Push-Pull ‡ Emergency Stop 40 mm, Illuminated, Twist-to-Release Twist-to-Release (Trigger Action) Plastic Metal Size [mm] Cat. No. Cat. No. Red 40 800FP-LMT44 800FM-LMT44 Red 60 800FP-LMT64 800FM-LMT64 Color OPERATOR INTERFACE Push-Pull (Trigger Action) Plastic Metal Cat. No. Cat. No.
PAGE 203
Bulletin 800F Control and Indicating Units Product Selection Momentary Push Button Operators, Non-Illuminated — Mushroom 40 mm Mushroom Plastic Metal Cat. No. Cat. No.
PAGE 204
Bulletin 800F Control and Indicating Units Product Selection 2-Function Momentary Multi-Operator, Non-Illuminated Position 1 of the latch (left position when viewed from the back) corresponds to position C of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position A of the operator.
PAGE 205
Bulletin 800F Control and Indicating Units Product Selection Single Turn Potentiometer Assembly ♣Δ♦ Single Turn Potentiometer Assembly Resistive Element Cat. No. None (Operator Only)♣ 800FP-POT 150 800FP-POT1 500 800FP-POT2 1000 800FP-POT3 2500 800FP-POT4 5000 800FP-POT5 10 000 800FP-POT6 ♣ The 800FP-POT is a complete operator assembly supplied without the resistive element, used with potentiometers having a shaft diameter of 6.0 mm (0.23 in.) and a shaft length of 50.0 mm (1.97 in.
PAGE 206
Bulletin 800F Control and Indicating Units Product Selection Back-of-Panel Components Description PQ Cat. No. Metal Mounting Latch These are zinc-plated, metal die cast mounting latches. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 10 800F-ALM Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 100 800F-ALM-BP Plastic Mounting Latch Note: Sold only in multiples of 10.
PAGE 207
Bulletin 800F Control and Indicating Units Description Incandescent Module For use with pilot lights, push buttons, and momentary mushroom operators. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. No bulb 24V AC/DC Cat. No. 800F-D0C 800F-D3C 120V AC/DC 800F-D5C 24V AC/DC Integrated LED Module For use with all illuminated devices. For best 120V AC results, LED should match lens color. For 240V AC amber operators, use yellow LED.
PAGE 208
Bulletin 800F Control and Indicating Units Product Selection Plastic and Metal Enclosures Plastic Enclosure Metal Enclosure Pendant Station OPERATOR INTERFACE Plastic Enclosures (Latch or Base Mounting) Feed-through design Accepts two-piece snap-in legends One-hole enclosure accepts 60 mm emergency stop legends UL Listed, CSA Certified Metal Enclosures (Latch or Base Mounting) Feed-through design Accepts two-piece snap-in legends Pendant Stations Blank legend cap marking Connector not
PAGE 209
Bulletin 800F Control and Indicating Units Product Selection Assembled Stations 1-Hole Plastic Enclosure with E-Stop Operator 1-Hole Plastic Yellow Enclosure, Metric Knockouts Key Release Operator Cat. No. Cat. No. 1 N.C. 800F-1YM1 800F-1YM4 1 N.O. / 1 N.C. 800F-1YM2 800F-1YM5 2 N.C. 800F-1YM3 800F-1YM6 1-Hole Metal Enclosure Twist-To Release Operator Key Release Operator Contact Configuration Cat. No. Cat. No. 1 N.C. 800F-1MM1 800F-1MM4 1 N.O. / 1 N.C. 800F-1MM2 800F-1MM5 2 N.C.
PAGE 210
Bulletin 800F Control and Indicating Units Accessories Legend Plates 15 YS E112 a b c 22 800F – 30 .5 m m m m Emergency Stop Legend Plates 800F-15YS… a c Size Text 800F-15Y… Code Description Code Description 15 60 mm round E112 EMERGENCY STOP 16 90 mm round F112 ARRÊT D’URGENCE b OPERATOR INTERFACE Color Code Description Y Yellow (30 mm) ‡ YS Yellow (22.5 mm) § Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.
PAGE 211
Bulletin 800FC Control and Indicating Units Product Selection Bulletin 800FC — Configured Pendant Stations Enclosure Type 3-hole 5-hole 7-hole 9-hole Cat. No. 800FC-7Z Description ‡ § § § Pendants — Yellow Plastic IP66 Cat. No. 800FC-3Z 800FC-5Z 800FC-7Z 800FC-9Z Housings supplied with cabel sleeve, hanger ring, cable clamp, wire guides, and gasket. ‡ Operator in position 1 is mounted horizontally. Operators in positions 2 and 3 are mounted vertically. § All operators are mounted horizontally.
PAGE 212
Bulletin 800FC Control and Indicating Units Product Selection / Accessories 1-, 2-, and 3-Speed Contact Block Assemblies Operator Type Composite Cat. No.
PAGE 213
Bulletin 855P Control and Indicating Units Product Selection 855P — Panel Mount Sounder 45 mm Panel Mount Sounder Housing Color Voltage 12…24V AC/DC Black 240V AC 65 mm Panel Mount Sounder Size [mm] Cat. No. 30 855P-B30SE22 45 855P-B30ME22 65 855P-B30LE22 30 855P-B20SE22 45 855P-B20ME22 65 855P-B20LE22 855PC — Panel Mount Sounder with LED 45 mm Panel Mount Sounder with LED Housing Color Voltage 65 mm Panel Mount Sounder with LED Size [mm] Lens Color Cat. No.
PAGE 214
Bulletin 855P Control and Indicating Units Product Selection 855PS — Panel Mount Strobe 30 mm Panel Mount Strobe Housing Color Voltage 24V AC/DC 45 mm Panel Mount Strobe Size [mm] 30 45 Black 12…24V AC/DC OPERATOR INTERFACE 65 30 Black 240V AC 45 65 65 mm Panel Mount Strobe Lens Color Cat. No.
PAGE 215
Bulletin 855T Control and Indicating Units Product Selection Control Tower™ Stack Lights Light Modules Red Flashing Incandescent (Black Housing) 240V AC Full Voltage Color Green 24V AC/DC Red Amber Green 240V AC Red Amber Illumination Type Cat. No.
PAGE 216
Bulletin 855T Control and Indicating Units Product Selection Single-Circuit Light Modules/with Sound Red Strobe/Sound Combination Module (Black Housing) 240V AC Full Voltage Description All modules contain a selected light option with a sound device that operates simultaneously. The sound module can be switched to pulsing or continuous with a dip switch located inside of the module. Volume is 92…107dB. UL Type 4/4X/13, IP65.
PAGE 217
Bulletin 855T Control and Indicating Units Product Selection Transducer Style Sound Modules UL Type 12, IP54. Volume is 80...103dB. Transducer Style Single Tone/Single Circuit Sound Module (Black Housing) 24V AC/DC Full Voltage 24V AC/DC 240V AC Module Type Tone Cat. No.
PAGE 218
Bulletin 855T Control and Indicating Units Accessories Accessories for 855T Description Cat. No.
PAGE 219
Bulletin 855F Control and Indicating Units Product Selection Pre-assembled and Pre-wired Tower Lights 70 mm, One to Five Modules Level 1 Voltage Module Color 24V 10 cm Alumin AC/DC um Pole 240V Mount AC Level 2 Module Level 3 Level 4 Color Module Color Module Cat. No.
PAGE 220
Bulletin 855H Control and Indicating Units Product Selection Industrial Electronic Horns with Attached Strobe Beacons Multi-circuit, selectable tone horns with strobe beacon light for use in general signaling applications. Range “A” Horn with Beacon 230V AC 50/60 Hz Red Strobe Beacon Base Color Range “C” Horn with Beacon 24V DC Amber Strobe Beacon Sound Output OPERATOR INTERFACE 100 dB max. at 1 m, 2 circuit DC, 1 circuit AC, 10 selectable tones Voltage 24V DC 240V AC, 50/60 Hz 24V DC 104 dB max.
PAGE 221
Bulletin 855H, 855B Control and Indicating Units Product Selection General-Purpose Electronic Horns Improved performance over electromechanical alternative 108 dB(A) maximum Three user-selectable tones to better contrast ambient noise Stepless volume control via potentiometer to adjust to changing ambient noise Lower current consumption at approximately half to one tenth of electromechanical alternative Longer life and maintenance-free due to non-moving parts and highly reliable discrete componen
PAGE 222
Bulletin 855BS, 855BM. 855BL Control and Indicating Units Product Selection Bulletin 855BS, 855BM, 855BL — Industrial Round Beacons 90 mm Beacons Base Type Voltage Function Steady Halogen OPERATOR INTERFACE Surface Mount 24V AC/DC Rotating Halogen Xenon Strobe Color Cat. No.
PAGE 223
Bulletin 855W Control and Indicating Units Product Selection Wall Mount Signal Lights UL Type 4/4X/13, IP65 Configurations from 2…5 light levels, available with or without sound Steady and flashing LED light modules, 24V AC/DC, 110/120V AC, and 230/240V AC User-selectable, continuous, or pulsing piezo sound modules Six light colors to choose from Two housing colors (grey, chrome), available to match application needs Can be mounted in any orientation OPERATOR INTERFACE Pre-Assembled Wall Mo
PAGE 224
Bulletin 855W Control and Indicating Units Product Selection Color LED Module Color ⎯ ⎯ ⎯ G A Flash R ⎯ ⎯ ⎯ ⎯ 855W-G24Y3Y5L4P1 B A R ⎯ ⎯ ⎯ ⎯ 855W-G24Y6Y5Y4P1 A R ⎯ ⎯ ⎯ ⎯ 855W-G24Y7Y5Y4P1 G A Flash R ⎯ ⎯ 855W-G24Y6Y3Y5L4P1 855W-G24Y6Y3Y5Y4P1 Steady LED Module ⎯ Color R Steady LED Module Level 5 Steady B Cat. No.
PAGE 225
Bulletin 2711C Graphic Terminals Product Line Overview PanelView™ Component Graphic Terminals Type Display Display Type Display Area (WxH) Display Size Resolution Operator Input 2711C-F2M 2711C-K2M PanelView C200 2711C-T3M 2711C-K3M PanelView C300 Monochrome: Transflective STN Monochrome: Transflective FSTN 49 x 14 mm 67 x 33 mm (1.93 x 0.55 in.) (2.64 x 1.30 in.) 2 in. 3 in.
PAGE 226
Bulletin 2711C Graphic Terminals Product Selection PanelView Component C200…C1000 Terminals Optimized for communication with MicroLogix or SLC 500 controllers: DF1, DH-485, Ethernet to MicroLogix or SLC 500 controller, and multi-vendor communications Display information in several languages including Russian, Greek, Chinese, Japanese and Korean Alert operators with alarm messages that include variables Upload and download groups of data or parameter settings with recipe feature Secure information
PAGE 227
Connectivity TABLE OF CONTENTS Rockwell Automation Signal Conditioners 4-2 Terminal Blocks 4-4 Wiring Systems 4-13 ArmorConnect Power Media 4-14 DeviceNet Media 4-16 Ethernet Media 4-28 Distributed I/O 4-32 Connection Systems 4-35 Visit our website: www.ab.
PAGE 228
Bulletin 931 Terminal Blocks Product Line Overview Bulletin 931 Analog Signal Conditioners Our analog signal conditioners are designed to isolate, transmit, convert and amplify analog signals in batch or continuous process applications. They are compatible with all types of integrated PLC and DCS I/O systems. You can integrate them with our PlantPAx™ Process Automation System to leverage a single control platform for batch, drives, motion control, process and safety.
PAGE 229
Bulletin 931 Terminal Blocks Product Selection Catalog Number Explanation 931 – S A1 A1 N - IP N a b c d - e f a c Code Type H High-Density S U Code Output Type Standard A1 0…20 mA or 4…20 mA Universal A2 4…20 mA A5 (2) 4…20 mA Current b Voltage or Current Input Type C1 Current A1 0…20 mA or 4…20 mA A2 4…20 mA A3 0…1 A, 0…5 A or 0…10 A AC A4 0…20 A, 0…25 A or 0…30 A AC/DC C2 C3 0…5V or 0…1 V DC 0…20 mA or 4…20 mA 0…10V DC 0…20 mA or 4...
PAGE 230
Bulletin 1492-J, 1492-L, 1492-K Terminal Blocks Product Line Overview Terminal Blocks Selection Bulletin Type 1492-J 1492-L Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Mini terminal blocks for 15 mm DIN Terminals for 35 mm DIN rail rail Single circuit terminal blocks Terminals for 35 mm DIN rail available in 8 colours Two level terminal blocks Component blocks — with diode — with a diode — in forward bias or in reverse bias — in forward bias or in reverse bias — with selectabl
PAGE 231
Bulletin 1492-J Terminal Blocks Product Selection Screw Type Terminal Blocks Feed-Through Terminal Blocks 2.5…4 mm2 2.5 mm2 Type Terminal Block 4 mm2 PQ Cat. No. PQ Grey 100 1492-J3 100 Cat. No.
PAGE 232
Bulletin 1492-J Terminal Blocks Product Selection Screw Type Terminal Blocks Feed-Through Terminal Blocks 50…70 mm2 50 mm2 Type 70 mm2 PQ Cat. No. PQ Cat. No.
PAGE 233
Bulletin 1492-J Terminal Blocks Product Selection Screw Type Terminal Blocks 1492-JG… 1492-JD… 1492-WFB4 Feed-Through Ground Blocks 4…10 mm2 4 mm2 Type Terminal Blocks Green/Yellow 6 mm2 10 mm2 PQ Cat. No. PQ Cat. No. PQ Cat. No.
PAGE 234
Bulletin 1492-L Terminal Blocks Product Selection Spring-Clamp Terminal Blocks Feed-Through Terminal Blocks 2.5…6 mm2 2.5 mm2 Type Terminal Blocks 4 mm2 6 mm2 PQ Cat. No. PQ Cat. No. PQ Grey 100 1492-L3 50 1492-L4 50 Cat. No.
PAGE 235
Bulletin 1492-L Terminal Blocks Product Selection Multiple Contact Point Feed-Through Blocks 2.5 mm2 Type Terminal Blocks 2.5 mm2 PQ Cat. No. PQ Cat. No.
PAGE 236
Bulletin 1492-L Terminal Blocks Product Selection Spring-Clamp Terminal Blocks Single Circuit Fuse Terminal Block 4 mm2 4 mm2 Type Blown Fuse Indication PQ Cat. No. Black with 10…57V LED 25 1492-RFB424 Black with 85…264V Glow Lamp 25 1492-RFB4250 Accessories Spring clamp-End Anchor Marking Systems: Marker card 20 1492-ERL35 5 1492-MS6X9 (80/card) See Publication 1492-SG008… for complete product information.
PAGE 237
Bulletin 1492 Terminal Blocks Product Selection 1492 Pre-Printed Markers 1492 – M5X10 a H 1-100 b c a 1492-L 1492-J, L 53 Inter54 Linked Markers for 56 1492-K 1492-L (NEMA) 1492-W Code Code M3X5 3x5 mm (100 markers/card) H M3X12 3x12 mm (120 markers/card) V Vertical Prin M5X5 5x5 mm (200 markers/card) HU Horizontal Up-side-down Print VU Vertical Up-side-down Print M5X8 5x8 mm (144 markers/card) M5X10 5x10 mm (144 markers/card) M5X12 5x12 mm (144 markers/card) M5X15 5x15 m
PAGE 238
Bulletin 1492 Terminal Blocks Accessories IEC Marking System Plotter for low volume marking demand, x-y plotter with ink pen Printer for high volume marking demand, fast, high quality ink yet print Description Cat. No. Plotter Kit Includes Series E Plotter, 1492-PLOTPEN25 ink pen, 1492PLOTPLT plate, communication cables, user manuals, ABPLOT software, and power adaptor. ClearMark Printer, 220V Includes ClearMark Printer, ClearTools Software and first set of ink.
PAGE 239
Bulletin 1492 Wiring Systems Product Line Overview Wiring System Selection Bulletin 1492 For Bulletin 1762 / MicroLogix 1200 1764 / MicroLogix 1500 1769 / Compact I/O Features Description Connecting to Allen-Bradley PLC I/O modules is convenient with AllenBradley 1492 Wiring System Interface Modules and Cables. Unlike terminal blocks, they connect through pre-wired cables to digital and analog I/O for Compact I/O for CompactLogix and MicroLogix.
PAGE 240
Bulletin 280 ArmorConnectTM Power Media Product Line Overview Three-Phase Power Media for ArmorStart Three-Phase Power Trunk Cable Three-Phase Power Drop Cable Three-Phase Power Tees and Reducers Three-Phase Power Receptacles CONNECTIVITY Description Tee - connects to a single drop line to trunk with quick Cordset - cable Cordset - cable Female change with integral with integral receptacles are connectors female or male female or male a panel mount Reducing Tee connector on connector on co
PAGE 241
Bulletin 280 ArmorConnectTM Power Media Product Line Overview Control Power Media Control Power T-ports Description Cable with integral connector on either one or both ends Features 6-pin/5-used configuration Male and female 6-pin/5-used Straight or right configuration angle versions Compact 16 AWG design conductors, Color-coded Ecable dual rated stop in and EUL TC/Open stop out Wiring and configurations STOOW Multiple standard lengths Rated Voltage Connector Body Dimensions 600V Str
PAGE 242
Bulletin 1485, 1585 DeviceNetTM Media Product Line Overview DeviceNet Media Bulletin Type 1485 DeviceNet Flat Media System—KwikLink General Purpose DeviceNet Flat Media System—KwikLink Heavy Duty this page Page 4-18 Product Selection DeviceNet Round Media DeviceNet Round Media Thick Trunk System Thin Trunk System Page 4-21 Page 4-22 DeviceNet Flat Media System — KwikLink General Purpose Typical Configuration 16 14 15 11 13 8 Enclosure PLC 9 5 6 CONNECTIVITY 4 2 3 1 7 4 DeviceNet Power
PAGE 243
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Flat Media System — KwikLink General Purpose, continued KwikLink General Purpose Connector Description KwikLink General Purpose Connector Cat. No. 1485P-K1E4-R5 Micro Style KwikLink General Purpose Flat Cable Trunk (Only for use with KwikLink General Purpose connector 1485P-K1E4-R5) Description DeviceNet KwikLinkCL2 Trunk Cable Spool Rating 75 m 24V Device DC, 4 A Net (Class Trunk 2) 200 m 420 m Used Color Cat. No.
PAGE 244
Bulletin 1485 DeviceNetTM Media Product Line Overview DeviceNet Flat Media System — KwikLink Heavy Duty Typical Configuration 23 24 25 Output Device 22 Output Device 17 11 Enclosure PLC 17 17 13 10 17 2 5 9 13 1 4 17 12 14 4 15 5 3 9 7 24V DC Power Supply 6 9 19 DeviceNet Power Supply Open Style Device 20 9 8 9 18 CONNECTIVITY 21 20 1 Flat Trunk Cable 10 Terminal Chamber 18 DeviceNet RightSight 2 Flat Auxiliary Power Cable 11 Auxiliary Power Drop 19 DeviceNet Sm
PAGE 245
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Flat Media System — KwikLink Heavy Duty, continued Description Cat. No.
PAGE 246
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Flat Media System — KwikLink Heavy Duty, continued KwikLink Accessories In order to support all of the options associated with the flexibility of KwikLink, Allen-Bradley offers an array of accessories including cable mounts, conduit adaptors, covers for unused nodes, and threaded plugs for sealing unused micro connectors. Description Cat. No.
PAGE 247
Bulletin 1485 DeviceNetTM Media Product Line Overview DeviceNet Round Media Thick Trunk System Typical Configuration 14 17 Enclosure 18 13 15 PLC 19 Output Device Output Device 8 1 7 7 5 12 9 1 3 3 9 3 3 1 4 2 1 7 14 DeviceNet Power Supply 1 10 7 7 6 7 8 16 10 10 11 24V DC Power Supply 13 14 Thick Trunk Cable 7 Thin Drop Cable 13 DeviceNet Photoelectric 2 Terminator 8 ArmorBlock I/O 14 DeviceNet Inductive 3 T-Port 9 Standard Cordsets 15 DeviceNet Limit Swit
PAGE 248
Bulletin 1485 DeviceNetTM Media Product Line Overview DeviceNet Round Media, continued Thin Trunk System Typical Configuration 14 10 15 16 11 12 Enclosure Output Device PLC 9 1 1 5 1 1 1 8 8 1 1 1 Output Device 7 Open Style Device 3 3 1 8 4 1 3 1 10 2 24V DC Power Supply 1 DeviceNet Power Supply 11 1 6 1 10 CONNECTIVITY 13 1 Thin Drop Cable 6 DevicePort 12 2 Terminator 7 13 DeviceNet Limit Switch DeviceNet Encoder 3 T-Port 8 ArmorBlock I/O Standard Cordsets
PAGE 249
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Round Media, continued Description Cat. No. Thick Trunk System 7.5 A Fuse (2 included) 1485T-P2T5-T5 2-port DeviceBox Tap, Thick Trunk, Cable Gland Connections 2 Drops 1485P-P2T5-T5 4-port DeviceBox Tap, Thick Trunk, Cable Gland Connections 4 Drops 1485P-P4T5-T5 8-port DeviceBox Tap, Thick Trunk, Cable Gland Connections 8 Drops 1485P-P8T5-T5 3 A Fuse (2 included) 1485T-P2T5-T5C 2-port DeviceBox Tap (Thin Trunk).
PAGE 250
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Round Media , continued Description DeviceNet T-Port with Trunk and Drop connections Left Keyway DeviceNet T-Port with Mini Trunk and Micro Drop connections Right Keyway Description Trunk Drop Cat. No. Micro Micro 1485P-P1R5-DR5 Mini Micro 1485P-P1R5MN5R1 Cable Cat. No. Pre-terminated Thin Cable: Right Angle Micro Male to Straight Micro Female: 1 m (3.
PAGE 251
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Round Media , continued Description Trunk DeviceNet T-Port with Mini Trunk and Mini Drop connections Left Keyway DeviceNet T-Port with Mini Trunk and Mini Drop connections Right Keyway Drop Cat. No. Mini Mini 1485P-P1N5MN5L1 Mini Mini 1485P-P1N5MN5R1 Description Cable DeviceNet Thick Trunk or Drop Cable DeviceNet Thick Trunk or Drop Cable DeviceNet Thick Trunk or Drop Cable Cat. No.
PAGE 252
Bulletin 1485 DeviceNetTM Media Accessories DeviceNet Round Media, continued Terminal Chambers Terminal chambers are passive field-installable connectors. Allen-Bradley 5-pin micro style and 5-pin mini style terminal chambers are designed for use with DeviceNet systems. These connectors contain screw terminals for quick and easy installation and are sized for use with either DeviceNet thick or thin cables.
PAGE 253
Bulletin 1485 DeviceNetTM Media Accessories DeviceNetTM Round Media, continued Open Style Connectors Description Cat. No.
PAGE 254
Bulletin 1585 Ethernet Media Product Selection Connection Systems: Cordsets, Ethernet M12 D Coded Connectivity Over molded housing suitable for IP67 applications and harsh industrial environments where extreme vibration, shock, chemicals and temperature are found.
PAGE 255
Bulletin 1585 Ethernet Media Product Selection Connection Systems: Ethernet Media Cable Spools Allen-Bradley Ethernet Media is available in raw spools as well as specified lengths with any of several connectors pre-attached. Cordsets and patchcords are prewired to assure reliable connection. Field Attachable connectors are also offered in a variety of selections for custom lengths and applications. These specially designed cables are unshielded and offered in two- and four-pair.
PAGE 256
Bulletin 1585 Ethernet Media Product Selection Connection Systems: EtherNet IDC Connector 26-22 AWG Conductors 360° Shielding Re-use IDC Connector Up to Five Times No Tools or Conductor Stripping Required Cat. 6 RJ45 Insulation Displacement Connector (IDC) Crimp Connector 26…24 AWG Standard Crimp Connector with Rugged Boot Cat. 5e Electrical Connection Housing Material RJ45 insulation displacement connector (IDC) — Diecast Zinc RJ45 crimp connector with boot 150V, 1.
PAGE 257
Bulletin 1783 Ethernet Media Product Selection Stratix 2000 Unmanaged The Stratix 2000 unmanaged line scales from 4 to 8 ports and offers a variety of copper and fiber options. Stratix 2000 unmanaged switches are easy to apply, requiring no configuration. Complementary IP67, managed and Enterprise integrated switches will fill out the Ethernet switch portfolio. Description Power Requirements Operating Temp. Dimensions (H, W, D) [mm] Cat. No.
PAGE 258
Bulletin 1732 ArmorBlock I/O Product Line Overview Bulletin Type Features I/O 1732 ArmorBlock I/O Sealed housing rated for IP67K and NEMA 4X eliminate enclosure costs I/O connectors are sealed M8 pico or M12 DC micro styles 8-point and 16-point self-configuring I/O provides flexibility for any input/output combination Removal and Insertion Under Power allows module replacement without impacting the network operation Isolated auxiliary power maintains power to the outputs if main power fails
PAGE 259
Bulletin 1732 ArmorBlock I/O Product Selection ArmorBlock Digital I/O Blocks Sealed housing rated for IP-69K and NEMA 4X eliminate enclosure costs. Low installation cost and easy to replace without rewiring because industry-standard M12 DC micro connectors are used for connection to the DeviceNet network and auxiliary power supply. I/O connectors are sealed M8 pico or M12 DC micro styles. 8-point and 16-point self-configuring I/O provides flexibility for any input/output combination.
PAGE 260
Bulletin 1732 ArmorBlock I/O Product Selection Cables and Cordsets The Cable and Cordset tables list the most common cable, patchcords, and cordsets for the I/O module. You can also find additional information on selecting cables and cordsets for ArmorBlock I/O in these publications: On-Machine Connectivity Catalog http://literature.rockwellautomation.com/idc/groups/literature/documents/ca/m117-ca001_-en-p.pdf On-Machine Solutions Selection Guide http://literature.rockwellautomation.
PAGE 261
Bulletin 889D, 889R, 889N, 889P, 898D & 898P, 871A & 889D Connection Systems Product Line Overview Bulletin Type Features 889D 889R 889N 889P DC Micro QD / M12 Cordsets and Patchcords AC Micro QD / M12 Cordsets Mini QD Cordsets Pico QD / M8 Cordsets and Patchcords 3-, 4-, 5- and 6-pin 4-, 5- and 8-pin connectors connectors Straight or right Straight or right angle female angle versions connector 22 AWG or 24 AWG Standard 18 AWG cable cable Oil resistant yellow Oil resistant yello
PAGE 262
Bulletin 889D Connection Systems Product Selection DC Micro QD / M12 Cordsets 4- and 5-pin DC micro style (M12) UL recognized and CSA certified Highly visible yellow PVC jacket offers good oil and chemical resistance Ratcheting coupling nut for vibration resistance Cable Connector Style Straight Female Right Angle Female Straight Female Wire Color Wire Rating 1 Brown 2 White 3 Blue 4 Black 22 AWG 300V 4A 1 Brown 2 White 3 Blue 4 Black 5 Grey Length [m (ft)] Cat. No. 2 (6.
PAGE 263
Bulletin 889D Connection Systems Product Selection Patchcords, DC Micro QD / M12 Style 4- or 5-pin DC micro style (M12) UL recognized and CSA certified Highly visible yellow PVC jacket offers good oil and chemical resistance Ratcheting coupling nut for vibration resistance Cable Wire Rating Length [m (ft)] Male (I/O End) Connector Style 1 (3.3) 2 (6.56) 5 (16.4) Straight 889D-F4ACDE-1 Right Angle 889D-F4ACDE-2 889D-F4ACDE-5 10 (32.8) 889D-F4ACDE-10 1 (3.3) 889D-R4ACDM-1 2 (6.56) 5 (16.
PAGE 264
Bulletin 889R Connection Systems Product Selection AC Micro QD / M12 Cordsets 3- and 4-pin AC micro style (dual key) Straight and right angle versions UL recognized and CSA certified Highly visible yellow PVC jacket offers good oil and chemical resistance Ratcheting coupling nut for vibration resistance Cable Connector Style Straight Female Wire Color 1 Green (GND) 2 Red/Black Tr. 3 Red/White Tr. Wire Rating Length [m (ft)] Cat. No. Braided 22 AWG Braided 22 AWG 250V 4A 2 (6.
PAGE 265
Bulletin 889N Connection Systems Product Selection Mini QD Cordsets 3-, 4- and 5-pin configurations Straight and right angle versions UL recognized and CSA certified Heavy duty STOOW-A 16 AWG cable Highly visible yellow PVC jacket offers good oil and chemical resistance One-piece molded body design Wire Color 1 Green 2 Black 3 White Straight Female Right Angle Female 1 Black 2 White 3 Red 4 Green Length [m (ft)] Cat. No. 16 AWG 600V 13 A 1.8 (6) 889N-F3AFC-6F 3.
PAGE 266
Bulletin 889P Connection Systems Product Selection Pico QD / M8 Style Cordsets 3-, 4- and 5-pin configurations Straight and right angle versions Highly visible yellow PVC jacket offers good oil and chemical resistance Heavy duty STOOW-A 16 AWG cable Screw-on coupling nut for rugged reliable connection Ratcheting coupling nuts for vibration resistance Female (Sensor End) Connector Style Cable Wire Color Wire Rating Straight Female 1 Brown 3 Blue 4 Black 24 AWG 60V AC/75V DC 4A Right Angle
PAGE 267
Bulletin 898D, 898P Connection Systems Product Selection Distribution Boxes, 4- and 8-Port DC Micro Style UL recognized and CSA certified Grey Pocan body offers good oil and chemical resistance 4 and 8 4-pin DC micro connectors Cable versions LED versions for use with PNP (sourcing) field devices No. of Connections Illuminated 4 PNP LED 8 Ratings 10…30V DC 2 A max./port 10 A max. total Cable Length—mm (in) Cat. No. 5 (16.4) 898D-P54PT-B5 10 (32.8) 898D-P54PT-B10 5 (16.
PAGE 268
Bulletin 871A & 889D Connection Systems Product Selection Terminal Chambers, DC Micro Style Field installable 4-pin DC micro style (M12) Straight or right angle versions Screw terminals provide simple and secure installation Allows easy modification of existing cable installations Type Female No. of Pins 4-Pin Connector Style Jacket Cable Diameter [mm (in)] Straight Female 4.0…6.0 (0.16…0.24) Male 4-Pin Straight Male Male 8-Pin Straight Male No.
PAGE 269
Safety TABLE OF CONTENTS Rockwell Automation Safety Interlock and Guard Locking Switches 5-2 E-stops and Trip Devices 5-8 Presence Sensing 5-12 Safety Relays and Controllers 5-21 Safety Enabled Actuators 5-29 Visit our website: www.ab.
PAGE 270
Bulletin 440N-S, 440N-Z, 440K, 440G Safety Interlock & Guard Locking Switches Product Line Overview Safety Interlock Switches (440N-Z, 440N-S, 440K, 440G) Bulletin Type 440N-Z 440N-S 440K 440G SensaGuard RF-ID Coded Non Contact Switches Sipha Magnetically Coded Non Contact Switches Tongue Operated Switches Guard Locking Switches Features SIL3/PLe rated switch even with mutliple units wired in series Coded/Uniquely coded options available No dedicated controller Large sensing distances (u
PAGE 271
Bulletin 440N-Z Safety Interlock & Guard Locking Switches Product Selection 440N-Z SensaGuard RF-ID Coded Non Contact Switches Features No dedicated controller needed SIL3/PLe maintained even with switches wired in series Multiple actuator sizes for large sensing distance typically (15…25 mm) IP69K environmental rating Short circuit and over voltage protection Led located on the switch for door status and troubleshooting 2 Safety PNP outputs and 1 auxiliary PNP output Unique coded version −
PAGE 272
Bulletin 440N-Z Safety Interlock & Guard Locking Switches Accessories / Product Selection Accessories 440N-Z Description Cat. No.
PAGE 273
Bulletin 440N-S Safety Interlock & Guard Locking Switches Product Selection 440N-S Sipha Coded Non Contact Interlock Switches Features Choice of heads — multiple sensors can be connected to one controller Mechanical switches with 1 N.O. + 1 N.C. contacts can be included in the circuit Magnetically coded system Conform to EN 60947-5-1, EN 1088 (ISO 14119) Ideal for hygiene applications Controller doubles up as the safety relay Approvals CE, cULus, TUV Head Style Safety Contacts 1 N.C. & 1 N.
PAGE 274
Bulletin 440K Safety Interlock & Guard Locking Switches Product Selection 440K Tongue Operated Switches Features Metal and Plastic Bodies GD2 offer stainless steel heads for demanding applications All complete with actuator Approvals CE, cULus, TUV Standards Conform to EN 1088 (ISO 14119), EN ISO 13849-1, EN 60947-1 and EN 60204-1 Model Safety Contacts Auxiliary Contacts Housing Material Conduit Entry Comment Cat. No. 1 x M16 DIN 50047 440K-C21061 DIN 50047 440K-C21097 Cadet 3 2 N.
PAGE 275
Bulletin 440G Safety Interlock & Guard Locking Switches Product Selection 440G Guard Locking Safety Switches Features Locks guard shut until open signal is given to interlock Conform to EN60947-5-1 and EN60204-1 Metal and Plastic Bodies LED Status Indication Approvals CE, cULus, TUV Standards Conform to EN 1088 (ISO 14119), EN ISO 13849-1, EN 60947-1 and EN 60204-1 Holding Force Supply Voltage Material Safety Contacts Auxiliary Contacts Model Cat. No. 3 N.C. 1 N.O.
PAGE 276
Bulletin 440E, 440J, 440P, 800F E-stops and Trip Devices Product Line Overview E-stops and Trip Devices (440E, 440J, 440P, 800F) Bulletin Type Features 440E 440J Cable (Rope) Pull Switches Switches up to 125m span Switch lockout on cable pulled and cable slack Cable-status indicator on switch lid Unique cable grip system Tensioner system Enabling Switches Three position enabling switch Lightweight and easy to use Optional jog and estop functions M20 conduit 440P 800FP Safety Lim
PAGE 277
Bulletin 440E E-stops and Trip Devices Product Selection 440E Lifeline 3 and 4 Cable (Rope) Pull Switches Features Unique cable grip system Can be installed and commissioned in approximately 3 min. Up to 300 mm of cable adjustment Cable tidy incorporated into grippers Conform to ISO 13850, EN 60947-5-5 and EN ISO 12100 Up to 125M cable span System Length Safety Contacts Auxiliary Contacts Model Cat. No. ≤ 30 m 2 N.C. 2 N.O. LRS3 440E-D13118 ≤ 30 m 3 N.C. 1 N.O.
PAGE 278
Bulletin 440E, 440J E-stops and Trip Devices Product Selection 440E Lifeline 4 Stainless Steel Cable (Rope) Pull Switches Features Rugged, corrosion-resistant 316 stainless steel construction IP66/IP67 enclosure rating allows use in harsh environments Switches up to 75m cable span Lid mounted emergency stop button, designed to conform with ISO 13850 System Length Safety Contacts ≤ 75 m 2 N.C. direct opening action ≤ 75 m 2 N.C.
PAGE 279
Bulletin 440P E-stops and Trip Devices Product Selection 440P Safety Limit Switches Features Large selection of actuator heads Positive operation, forced disconnection of contacts IP66 enclosure protection Snap-acting, slow make before break or slow break before make contact blocks Contacts 1 N.C. + 1 N.O.; 2 N.C. + 1 N.O.; 3 N.C.; 2 N.C. + 1 N.O.
PAGE 280
Bulletin 440L, 445L, 442L, 440F Presence Sensing Product Line Overview Presence Sensing Safety Devices (440L, 445L, 442L, 440F) Bulletin Type Features 440L 440L GuardShield Safety Light Curtains POC (Point of Operation Control) GuardShield Safe 4 Light Curtains PAC (Perimeter Access Control) Type 4, 14 mm and 30 mm resolution Type 2, 30 mm resolution Scanning range 0.3…7 m / 14 mm resolution Scanning range 0.
PAGE 281
Bulletin 440L, 445L, 442L, 440F Presence Sensing Product Line Overview Presence Sensing Safety Devices (440L, 445L, 442L, 440F) Bulletin 445L 442L 440F Type GuardShield Micro 400 Safety Light Curtains POC (Point of Operation Control) Safety Laser Scanner Safezone Singlezone / Multizone Safety Mats Features Type 4, 14 mm and 30 mm resolution 150 mm…1200 mm protected height in 150 mm increments Scanning range / resolution 0…5 m / 14 mm, 0…5 m / 30 mm Data output to MSR42, MSR42 Outputs: Two
PAGE 282
Bulletin 440L Presence Sensing Product Selection 440L GuardShield Safety Light Curtains, POC (Point of Operation Control) Features Type 4 and Type 2 models PNP outputs (2 N.O safety + 1 N.O aux.) 14 mm or 30 mm object sensitivity Range: 0.3…7 m (14 mm resolution models), Range: 0.
PAGE 283
Bulletin 440L Presence Sensing Product Selection 440L GuardShield Safety Light Curtains, PAC (Perimeter Access Control) Features Type 4 models correspond to EN61496 PNP outputs (2 N.O safety + 1 N.O aux.) Range: 0.4…16 m Beam coding External device monitoring (EDM) Start/restart interlock GuardShield 3-beam PAC - Type 4, 400 mm Resolution Protected Height (mm) Response Time Number of Beams Restart Cat. No.
PAGE 284
Bulletin 445L Presence Sensing Product Selection 445L GuardShield Safe 4 Light curtains, POC (Point of Operation Control) 5 Pin M12 connectors Optically synchronized Integrated laser alignment system IP65 enclosure rating Simple installation cULus and CE Marked for all applicable directives 14 mm Resolution 30 mm Resolution Protected Height [mm (in.)] Number of Beams Cat. No. Number of Beams Cat. No. 120 (4.7) 16 445L-P4L0120YD 8 445L-P4S0120YD 240 (9.
PAGE 285
Bulletin 445L Presence Sensing Product Selection 445L GuardShield Safe 2 Light curtains, POC (Point of Operation Control) 5 Pin M12 connectors Optically synchronized Integrated laser alignment system IP65 enclosure rating Simple installation cULus and CE Marked for all applicable directives Protected Height [mm (in.)] Resolution [mm (in.)] Number of Beams Pair Weight [kg (lbs)] Cat. No. 120 (4.7) 30 (1.18) 8 1.0 (2.2) 445L-P2S0120YD 240 (9.4) 30 (1.18) 16 1.4 (3.
PAGE 286
Bulletin 445L Presence Sensing Product Selection MSR42 GuardShield Micro 400 Controller and Multi Function Safety Module Pigtail cable with M12 connector 3 box system with dedicated safety controller Offered in 14 mm and 30 mm resolutions Slim profi le housing (15 mm x 20 mm) 150 mm to 1200 mm protective heights, in 150 mm increments DIN controller is also multi function safety module Configuration of controller functionality through wiring or software Expansion safety relay modules (MSR45E
PAGE 287
Bulletin 445L Presence Sensing Product Selection Optional Safety Relay Interfaces Input Voltage MSR45E Safety Relay Expansion Model Floating Fixed Blanking Blanking Reset Supplied by Determined MSR41 by MSR41 or or MSR42 MSR42 No No PSDI Muting Outputs Cat. No. No No 2 N.O. 440R-P4NANS The MSR42 (MSR41) can have up to three MSR45E safety relays inter-connected. Each module requires a ribbon cable connector to make the interconnection. The table shows the cat. no.
PAGE 288
Bulletin 442L, 440F Presence Sensing Product Selection 442L Safezone Laser Scanner Features Vertical or horizontal mounting in stationary or mobile applications Safety category 3 per IEC 61496 and SIL2 per IEC61508 Auto configure safety field using ambient contour Singlezone - one field set Multzone - four switcheable field sets Model Application Specific Resolutions Safety Outputs Auxiallary Outputs Angular Scanning Range Safety Field Range SafeZone Single Zone 30, 40, 50, 70 and 150 mm
PAGE 289
Bulletin 440R, 1752 Safety Relays & Controllers Product Line Overview Safety Relays and Controllers (440R, 1752) Type Features Approvals 440R 440R 440R Next Generation Guardmaster safety relays MSR100 Dedicated Safety Relays MSR30 Dedicated Safety Relays with Solid State Outputs Designed to meet the new functional safety standards, the range monitors a broad range of input devices, and a Monitors multiple inputs in full range of reset functions one base controller e.g.
PAGE 290
Bulletin 440R Safety Relays & Controllers Product Selection Safety Monitoring Relays A broad range of safety functions Versatility through simple logic, reset and timing configurations Single wire safety relay connection allows for ease of installation and system flexibility Terminals are grouped together for power, inputs and outputs for clear connection Compact solution saves energy and space on DIN rail Consistent terminal layouts and configuration allow simplified installation The new famil
PAGE 291
Bulletin 440R Safety Relays & Controllers Product Selection MSR100 Dedicated Safety Relays Conform to EN ISO 13849-1, EN 62061 and EN 60204-1 Stop category 0 Cross fault monitoring Monitored or automatic reset Removable or fixed terminals Stop Category 0 Relays Inputs 1 N.C. Light Curtain or Single Channel (MSR126T) Dual Channel 2 N.C. (MSR126.IT) Safety Outputs 3 N.O. 2 N.O. 2 N.O. Auxiliary Outputs 1 N.C. None None Terminals Fixed Fixed Fixed Fixed 1 N.C., 2 N.C., Light Curtain 3 N.
PAGE 292
Bulletin 440R Safety Relays & Controllers Product Selection MSR100 Dedicated Safety Relays with Delayed Outputs Conform to EN ISO 13849-1, EN 62061 and EN 60204-1 Stop category 0 and 1 Light curtain, E-stop, safety gate inputs Two immediate safety outputs Delayed outputs: 3 N.O. safety or 2 N.C. safety and 1 N.C. aux. Cross fault monitoring Monitored or automatic reset Removable terminals Stop Category 1 Relays Instant Safety Safety Inputs Outputs Delayed Safety Outputs 0.15…3 s 3 N.O.
PAGE 293
Bulletin 440R Safety Relays & Controllers Product Selection MSR125H/HP Logic unit for monitoring and interfacing two-hand control devices Conform to EN ISO 13849-1 and EN 60204-1 Safety category IIIC per EN 574 Two-hand control unit Two N.O. safety outputs Removable or fixed terminals 22.5 mm wide housing Input Buttons Safety Outputs Terminals Model Fixed Mechanical Supply Voltage Cat. No. 24V DC 440R-D23166 MSR125H 2 N.O.
PAGE 294
Bulletin 440R Safety Relays & Controllers Product Selection MSR57P Safe Speed and Standstill Monitoring Safety Relays Conform to EN ISO 13849-1, EN 60204-1 and EN IEC 62061 SIL CL3 per EN IEC 62061, PLe per ISO 13849-1 Stop categories 0, 1, 2 Wide variety of on-board safe speed control functions Supports up to 2 encoders (sin/cos and TTL) 6 N.O. solid-state safety outputs 4 solid-state auxiliary outputs 8 diagnostic LEDs DPI configuration port 67.
PAGE 295
Bulletin 440R Safety Relays & Controllers Product Selection MSR200 Series: Modular Safety Relay System with Communications Conform to EN ISO 13849-1, EN 62061 and EN 60204-1 Stop category 0 Pulsed input monitoring Two input circuits: safety gate, E-stop or safety mat Up to 22 diverse input devices Two safety outputs, three auxiliary outputs Ten diagnostic LEDs Removable terminals Description Inputs Safety Outputs Auxiliary Supply Outputs Voltage Type Application MSR210P GT, ES, SM
PAGE 296
Bulletin 440R , 1752 Safety Relays & Controllers Product Selection MSR300 Series: Modular Safety Relay System with Logic Control Conform to EN ISO 13849-1 and IEC 61508 SIL3 per IEC 61508 EN 574 Type IIIC Stop category 0 and 1 Pulsed input monitoring Three auxiliary group outputs Six diagnostic LEDs Manual, monitored or automatic reset Zone control—up to three RS232 Diagnostic Comms Unidirectional RS232, 4800 baud Bidirectional RS232, 2400, 4800, 9600, 19200 baud Removable termina
PAGE 297
Bulletin 100S-C, 100S-D, 22D Safety Enabled Actuators Product Line Overview Safety Enabled Actuators (100S-C, 100S-D, 22D) Bulletin Type Features Approvals 100S-C Safety Contactor 22D Safety Contactor PowerFlex 40P and 70 with Safe-off Option Positively Guided/Mechanically Linked Auxiliary Contacts Positively Front-Mounted Auxiliary Guided/Mechanically Linked Contacts: Auxiliary Contacts which are - Permanently Fixed Safe-off function conforming required in feedback circuit for - Protective
PAGE 298
Notes SAFETY 5-30 Visit our website: www.ab.
PAGE 299
Sensors & Switches TABLE OF CONTENTS Phototelectric Sensors 6-2 Inductive Proximity Sensors 6-24 Capacitive Proximity Sensors 6-32 Ultrasonic Sensors 6-33 Condition Sensing Switches 6-35 Limit Swiches, see page 5-11 Rockwell Automation Visit our website: www.ab.
PAGE 300
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Product Line Overview Photoelectric Sensors (42EF RightSight, 42CA, 42CM, 42CS) Bulletin 42EF RightSight 42CA Photoelectric Sensors Features Wide selection of sensing modes Popular housing allows through hole mounting as well Wide selection of as M18 threaded sensing modes mounting hubs Popular cylindrical Heavy duty and Plastic M18 food applications housing Clear object detection model available Long range laser class I version Se
PAGE 301
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Product Line Overview Photoelectric Sensors (42JS) Bulletin Type Features 42JS 20 mm Miniature Rectangular Visible light source offered on all models for ease of alignment Optional snap-on adaptor enables 18 mm mount and makes sensor replacement a snap Patented ASIC design offers linear sensitivity adjustment, stability indication, and excellent noise immunity Compact sealed housing and cavity free design to minimize collection of dust and d
PAGE 302
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Product Line Overview Photoelectric Sensors (44B, 42BT, 42G 9000 Series) 44B 42BT 42G (9000 Series) Type Background and Foreground Suppression Sensors Long Range Background Suppression Sensors Photoelectric Sensors Standard and Timing Features Adjustable BGS/FGS Popular square housing allows through hole mounting High impact acrylic housing design for rugged food industry Bulletin Sensitivity Adjustment Adjustable BGS Popular squa
PAGE 303
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Product Line Overview Photoelectric Sensors (45BPD, 45CPD, 45CLR) Bulletin Type Features 45BPD 45CPD Precise Laser Long Range Laser Distance Distance Measurement Sensor Measurement Sensor Analog and discrete outputs CCD technology Laser Class II Analog and discrete outputs Time of flight Laser Class I & II 45CLR Photoelectric Accessories ColorSight Color / Contrast Sensors Mounting Brackets Three channel color matching (3 outp
PAGE 304
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Product Line Overview Photoelectric Sensors (45PVA, 45AST, 45MLA, 45DLA) Bulletin Type Features Applications Ligjt Type Sensing Specification Sensing Range Measurement / Detecting Range Resolution Output Mode Digital I/O Interface Analog Response Time Connections Operating Voltage Enclosure Approvals Accessories 45PVA Slim Type Picking Sensors 35 mm object resolution Robust aluminum enclosure Four heights to choose from Highly visible JOB a
PAGE 305
Bulletin 42EF Photoelectric Sensors Product Selection Photoelectric Sensors—RightSight Flexible M18 mounting options 1200 psi washdown rating Non-adjustable, adjustable and teach versions 360° visible LED indicators Reverse polarity protection Short-circuit protected outputs Laser and Clear Object detecting models UL listed, CSA certified and CE marked for all applicable directives Polarized Retroreflective Field of View:1.
PAGE 306
Bulletin 42EF Photoelectric Sensors Product Selection Fixed Focus Diffuse Spot Size:4 mm Emitter LED:Visible red and green by Cat. No. Operating Voltage/Supply Current 10.8…30V DC, 30 mA Sensing Distance 0.043 m (0.14 ft) Output Mode Background Output Type/ Leakage Capacity/ Current, Connection Response Time Max. Type NPN & PNP 100 mA, 1 ms L.O. — Cat. No. DC: 0.1 4-pin micro ‡ mA; AC: (M12) QD 0.4 mA ‡ 42EF-F2JBC-F4 42EF-F3JBC-F4 DC Micro QD / M12 Cordset Cat. No.
PAGE 307
Bulletin 42JS Photoelectric Sensors Product Selection VisiSigh — 20 mm Miniature Rectangular Visible light source offered on all models for ease of alignment Optional snap-on adaptor enables 18 mm mount and makes sensor replacement a snap Patented ASIC design offers linear sensitivity adjustment, stability indication, and excellent noise immunity Compact sealed housing and cavity free design to minimize collection of dust and debris while allowing for easy sensor cleanup Threaded metal M12 or M8
PAGE 308
Bulletin 42CA Photoelectric Sensors Product Selection 18 mm Plastic Cylindrical Style Complementary light and dark operate outputs (selectable light or dark operate on background suppression models). Two LED indicators provide status of power, output, unstable operation and short-circuit protection. Improved 1 ms response time on most models. Extended range high-speed models with a 0.5 ms response time.
PAGE 309
Bulletin 42CM Photoelectric Sensors Product Selection Metal Cylindrical M18 Photoelectric Sensors M18 industry standard package Wide selection of sensing modes Laser models available 30V DC operation NPN or PNP outputs Fast response time cULus and CE marked for all applicable directives Polarized Retroreflective Field of View:1.8° Emitter LED:Visible red 660 nm Operating Voltage/Supply Current 10…30V DC, 30 mA Sensing Distance Output Mode 0.003…3 m (0…9.9 ft) L.O. & D.O.
PAGE 310
Bulletin 42CS Photoelectric Sensors Product Selection 18 mm Stainless Steel Cylindrical Style Ferromagnetic teach for easy sensor programming Smooth barrel design minimizes the accumulation of undesired particles and allows for fast and easy clean up Extended temperature operating range 18 mm stainless steel 316L enclosure with laser etched markings Background suppression models for improved detection of shiny objects Two teach modes: standard and precision Teach lockout feature prevents unau
PAGE 311
Bulletin 44B, 42BT Photoelectric Sensors Product Selection Background and Foreground Suppression Sensors Adjustable background and foreground suppression models Adjustable sensing range Power, output, and stability status indicators Micro QD connection with 90° swivel Protected from mis-wiring NPN and PNP outputs Fast 1 ms response time Background Suppression Sensors Object to be Sensed Detection by presence of reflected light from the target.
PAGE 312
Bulletin 42G (Serie 9000) Photoelectric Sensors Product Selection Photoelectric Sensors Standard and Timing Harsh duty 30 mm package Wide selection of sensing modes Wide selection of operating modes Both DC and AC/DC operation Models with teach function Standard ON/OFF and timing versions Fast response time Variety of connection types UL listed, CSA approved and CE marked for all applicable directives Polarized Retroreflective Field of View:1.
PAGE 313
Bulletin 45BPD Photoelectric Sensors Product Selection Precise Laser Distance Measurement Sensor Noncontact measurement Visible red laser, Class 2 Analog and discrete outputs Easy set-up using Teach-in buttons Scalable analog output (4…20 mA) Configurable discrete output (N.O./N.C.) IP 67 enclosure 270° rotatable connector Set point adjustment via pushbuttons Self-contained sensor Laser-disable control Teach-in lock out Averaging and speed mode Sensing Range [mm (in.)] 30…100 (1.
PAGE 314
Bulletin 45CPD, 45CLR Photoelectric Sensors Product Selection Long Range Laser Distance Measurement Sensor Eye Safe Class 1 laser for operation Visible red Class 2 laser for set-up 6 m sensing range 2 discrete outputs (PNP) and analog output (4…20 mA) Easy set-up using teach-in buttons IP 67 enclosure Self-contained sensor Sensing Range [mm (in.)] Measuring Range—mm (in) 200…6000 (7.87…236.22) 5800 (228.35) Spot Size [mm (in.)] 4 x 7 @ 2 m (0.16 x 0.28 @ 6.56 ft) Cat. No.
PAGE 315
Bulletin 45PVA, 45AST Photoelectric Sensors Product Selection 45PVA Slim Type Picking Sensors Robust metal enclosure with super slim 13 mm profile Large highly-visible job indicator lights Optional red fault light indicator to notify operator of incorrect component selection Dip switch selectable lighting operation for job lights NPN or PNP dip switch selectable output reduces inventory Two frequency dip switch selectable cross talk protection Different sizes are available for different compo
PAGE 316
Bulletin 45MLA Photoelectric Sensors Product Selection 45MLA Measuring Arrays and Controllers Height measuring capability Slim profile array housing Long operating range — 4 m Fast reaction time and measurement speed Individual beam status available via controller (serial communication models only) Measuring Light Array, Standard Sensing Height [mm] Beam Spacing [mm] No. of Beams Cat. No.
PAGE 317
Bulletin 45DLA Photoelectric Sensors Product Selection 45DLA Discrete Light Arrays Integrated light array controller IP54 Simple, flexible mounting Optically synchronized (no electrical connection between emitter and receiver required) Push/pull (PNP/NPN) outputs (connect to sinking or sourcing inputs) Wiring selectable range and output state (light/dark operate) 30 mm resolution Sensing height of 118…734 mm (4.6…28.9 in.) Beams Sensing Height [mm (in.)] Response Time Cat. No.
PAGE 318
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Accessories Mounting Brackets Description Dimensions—mm (in) Height Cat. No. — 60-2649 — 60-2439 — 60-BCS-18B — 60-2657 — 60-2421 101.6 (4.0) 60-2721 152.4 (6.0) 60-2722 203.2 (8.0) 60-2723 254 (10) 60-2724 203.2 (8.0) 60-2718 254 (10) 60-2719 304.8 (12.0) 60-2720 10° Adjustment in Each Direction 28.6 (1.125) 57.15 (2.25) Swivel/tilt bracket allows ±10° vertical and 360° rotation adjustment 7.95 (0.31) 50.08 (2.
PAGE 319
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Accessories Mounting Brackets Description Dimensions—mm (in) Cat. No. Mounting Brackets (2 Brackets, included) 16 (0.63) 11 6 (0.23) (0.43) 18 (0.7) 10 (0.39) 20 (0.78) Mounting Bracket. Used for Parts Verification Array 45PVA 40 (1.57) Ø 4.6 (0.18) 23 (0.91) 10 (0.39) 60-2773 Ø 4.6 (0.18) 2 (0.07) Optional Mounting Brackets (not included with sensor) 34.0 (1.34) 17.0 (0.67) 7.6 (0.30) Mounting Bracket.
PAGE 320
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Accessories Mounting Brackets Description Dimensions—mm (in) Cat. No. Dovetail Bracket. Used for Background and Foreground Suppression Sensors 44B 44B-BKT 48.5 (1.9) 10.5 (0.41) 24° 4.3 (0.169) Mounting bracket for 45BPD, 45BRD, 45CLR 4.3 (0.169) 50° 50.97 (2.0) 30 (1.18) 4.2 (0.165) 45BPD-BKT1 10.5 (0.41) 22 (0.86) 4.3 (0.169) 13.9 (0.54) 24° 65 (2.55) 23.8 (0.93) 58 (2.28) 4.3 (0.169) 17 (0.66) 21.2 (0.83) 8.5 (0.33) 38.2 (1.
PAGE 321
Bulletin 42 (Serie 9000), 44, 45 Photoelectric Sensors Accessories Reflectors Dimension— mm (in) Description Diameter Diameter with center mount hole Diameter for clear object sensors 32 mm (1.25 in) diameter Cube Style Diameter 76.2 (3) Corner Cube Diameter 31.75 (1.25) Microcube reflector for polarized retroreflective laser sensors Mounting Temperature —C (F) Cat. No.
PAGE 322
Bulletin 872C, 871TM, 871FM, 871C, 871P Inductive Proximity Sensors Product Line Overview Proximity Sensors (872C, 871TM, 871P) Bulletin Type Features Barrel Size Sensing Range Standard Sensing Range Extended Sensing Range Output Mode Connection Supply Voltage Enclosure Rating IP NEMA Special enclosure SENSORS Approvals Product Selection Accessories 6-24 872C Proximity Sensors WorldProx Inductive 360° visible LED Nickel-Plated Brass or Plastic Barrel Standard and extended sensing models 87
PAGE 323
Bulletin 872C Inductive Proximity Sensors Product Selection Proximity Sensors WorldProx Inductive 3-Wire DC Standard and Short Barrel 3-wire operation 3-conductor, 3- or 4-wire connection 10…30V DC Normally-open or normally-closed output Short circuit, overload, false pulse, reverse polarity, and transient noise protection UL listed, cUL listed and CE marked for all applicable directives Standard Barrel Barrel Connection Diameter Type [mm] M6.5 M8 Cable Style M12 M18 M6.
PAGE 324
Bulletin 872C Inductive Proximity Sensors Product Selection 3-Wire DC Extended Sensing 3-wire operation 3-conductor, 4-wire connection 10…30V DC Normally-open or normally-closed output Short circuit, overload, false pulse, reverse polarity, and transient noise protection UL and cUL recognized and CE marked for all applicable directives Connection Type Barrel Switching Diameter Nominal Sensing Output Frequency [mm] Distance [mm (in.
PAGE 325
Bulletin 871TM Inductive Proximity Sensors Product Selection Proximity Sensors Stainless Steel Inductive 3-Wire DC 3-wire operation 3-conductor or 4-wire connection 10…30V DC Short circuit, overload, false pulse, reverse polarity, and transient noise protection Normally-open or normally-closed output UL listed, CSA certified and CE marked for all applicable directives Barrel Connection Diameter Nominal Sensing Type [mm] Distance [mm (in.
PAGE 326
Bulletin 871TS Inductive Proximity Sensors Product Selection Bulletin 871TS Food and Beverage Stainless steel 316L barrel IP67, IP68, and IP69K enclosure ratings FDA Certified, PPS sensing face ECOLAB & Johnson Diversey Certified Short circuit, false pulse, reverse polarity, overload, and transient noise protection cULus Listed and CE Marked for all applicable directives Extended temperature rating (-40…+80 °C) Connection Type Barrel Diameter [mm] 12 Micro QD style 18 Nominal Sensing Dist
PAGE 327
Bulletin 871P Inductive Proximity Sensors Product Selection VersaCube Inductive Sensors 3-Wire DC VersaCube New rugged housing Weld-field immune models Burn and weld-slag resistant body on weld-field immune models Convenient mounting base 3-wire operation 4-pin connection 10…60V DC Normally-open or normally-closed output Short circuit, overload, false pulse, reverse polarity, and transient noise protection UL listed, cUL certified and CE marked for all applicable directives Connection
PAGE 328
Bulletin 872C, 871TM, 871FM, 871C, 871P Inductive Proximity Sensors Accessories Mounting Brackets for Tubular Proximity Sensors—Right Angle Style Proximity Tube Diameter [mm (in.)] Dimensions—mm (in) 31.8 (1.25) 11.9 (0.46) 8.74 (0.34) 8 (0.31) 8.74 (0.34) 13.9 (0.55) 18 (0.71) 19.1 (0.75) For use with the 871ABXN12 or 871A-BXS12 Spring Return Brackets. 17.4 (0.68) 30 (01.18) 23.0 (0.90) For use with the 871ABXN30 or 871A-BXS30 Spring Return Brackets. 3.05 (0.
PAGE 329
Bulletin 872C, 871TM, 871FM, 871C, 871P Inductive Proximity Sensors Accessories Stainless Steel Mounting Hardwareand Chemical Resistant Materialfor Harsh Environment Sensor Diameter— mm 7.0 (0.28) 4 G 1.5 (0.06) 12.0 (0.47) Ø 2.4 (0.09) D C ⎯ D G Cat. No. ⎯ 4 (0.16) 871A-BP4 871A-BP5 871A-BP7 5 ⎯ ⎯ 5 (0.20) 6.5 ⎯ ⎯ 6.5 (0.26) 8 8.0 (0.31) 18.3 (0.72) ⎯ Bracket C Dia. of Proximity Sensor Dimensions—mm (inches) 871A-BP8 12 12.0 (0.47) 18 18.0 (0.71) 29.4 (1.
PAGE 330
Bulletin 875C, 875CP Capacitive Proximity Sensors Product Line Overview / Product Selection Capacitive Proximity Sensors (875C, 875CP) Bulletin 875C Capacitive Proximity Sensors General Purpose Type Nickel-Plated Brass Barrel Adjustable Sensing Distance Plastic Barrel Features Barrel Size Diameter M18, M30 Standard Sensing Range 1 mm…10 mm, 2 mm…20 mm PNP Normally Open Shielded 3-wire DC, 2-wire AC Output Mode Cable Micro / M12 Connector Connection Supply Voltage 10…48V DC Enclosure Rati
PAGE 331
Bulletin 873E, 873P Ultrasonic Sensors Product Line Overview Ultrasonic Sensors (873E, 873P) Bulletin Type Features 873P Ultrasonic Sensors Analog or Discrete Output Adjustable sensing distance (discrete model) Analog and discrete output types Barrel Size Ultrasonic Sensors Programmable Programmable for window setup Analog and discrete output types Cylindrical M18, M30 Cylindrical M30 ⎯ ⎯ Sensitivity Adjustment Manual Manual Response Time 25 ms ⎯ Reflection 100…2500 mm 150…1500 mm,
PAGE 332
Bulletin 873P Ultrasonic Sensors Product Selection Ultrasonic Sensors Analog or Discrete Output Sensing Ranges: 100…2500 mm Analog output models (4…20 mA, 0…10V DC) Discrete output models (normally open, PNP) Plastic barrel housing Adjustable sensing distance (discrete models) Hold/Synchronize function to reduce crosstalk Short circuit, overload, false pulse, reverse polarity, and transient noise protection cULus listed and CE marked for all applicable directives Barrel Connection Diameter
PAGE 333
Bulletin 836E,837E Condition Sensing Product Line Overview Condition Sensing Switches Bulletin Type Features 836E 837E 839E Solid-State Pressure Switches Solid-State Temperature Switches Solid-State Flow Switches Microprocessor based with no moving parts for longer life and reduced downtime Rugged, corrosionresistant 316L stainless steel housing features an IP66 enclosure rating to withstand harsh industrial conditions Operating pressures from 15…6,000 psi (gauge) Industry-leading four-dig
PAGE 334
Bulletin 836E Condition Sensing Product Selection Solid-State Pressure Switches Dual PNP Output or 4…20 mA Analog with Single PNP Output Media temperature range from -40…100°C (-40…212°F) Operating temperatures from -40…85°C (-40…185°F) Industry-leading four-digit 14-segment digital display Independently programmable dual PNP N.O./N.C. outputs or 4…20 mA analog outputs Accuracy is <0.5% of upper pressure range limit Repeatability is <0.
PAGE 335
Bulletin 836E Condition Sensing Product Selection Solid-State Pressure Switches, Continued 4…20 mA Analog with Single PNP Output Process Connection 1/4 inch NPT (female) SAE 7/16-20 UNF (female) G1/4 BSPP (female) Pressure Range (psig) Set Point Range (psig) Reset Point Range (psig) Maximum Working Pressure (psig) -15…15 -14.92…+15 -15.00…14.92 40.5 Cat. No. ‡ 836E-DC1CC1D4 0…60 0.30…60 0…59.70 160.5 836E-DC1EL1D4 0…150 0.75…150 0…149.25 400.5 836E-DC1EN1D4 836E-DC1EQ1D4 0…600 3.
PAGE 336
Bulletin 837E Condition Sensing Product Selection Solid-State Temperature Switches Dual PNP Output or 4…20 mA Analog with Single PNP Output Media temperature range from -50…150°C (-58…302°F) Operating temperatures from -40…85°C (-40…185°F) Industry-leading four-digit 14-segment digital display Independently programmable dual PNP NO/NC outputs or 4…20 mA analog outputs Stainless steel probe 316L stainless steel construction IP66 enclosure rating Dual PNP Output Process Connection‡ 1/4 inch N
PAGE 337
Bulletin 837E Condition Sensing Product Selection Solid-State Temperature Switches, Continued 4…20 mA Analog with Single PNP Output Process Connection‡ 1/4 inch NPT (Male) 1/2 inch NPT (Male) G1/4 BSPP G1/2 BSPP Set Point Range (psig) °C (°F) Reset Point Range (psig) °C (°F) Probe Length Cat. No. ‡ -49…150° (-57…302°) -50…149.5° (-58…301.1°) 50 mm 837E-DC1BN1A1D4 (1.96 in.) -49…150° (-57…302°) -50…149.5° (-58…301.1°) 100 mm 837E-DC1BN1A2D4 (3.93 in.) -49…150° (-57…302°) -50…149.5° (-58…301.
PAGE 338
Bulletin 839E Condition Sensing Product Selection Solid-State Flow Switches Dual PNP Output or 4…20 mA Analog with Single PNP Output Microprocessor based with no moving parts for longer life and reduced downtime Rugged, corrosion resistant 316 stainless steel housing features an IP66 enclosure rating to withstand harsh industrial conditions Flow rates of liquid media (calorimetric measuring principle) in the range from 0.03…3 m/s (0.1…9.
PAGE 339
Bulletin Index Bulletin Number Page 100-C ............................................1-31 100-CR .........................................1-31 100-D ...........................................1-39 100-G............................................1-44 100-K ............................................1-28 100-KR .........................................1-28 100S-C .........................................1-32 100S-D .........................................1-40 103C/107C .................................
PAGE 340
Rockwell Automation offers a breadth of quality Allen-Bradley® components to fit your specific needs. In order to assist you with your component selection, we offer a variety of configuration and selection tools. Local Distributor Call your local in-country representative http://www.rockwellautomation.com/distributor/ On-Line Product Directory Our extensive product portfolio is designed to improve your processes through every stage of your manufacturing cycle. http://www.rockwellautomation.