User manual

1 Publication DNET-UM004A-EN-P - March 2004

Chapter

Communicate with a PanelView™ Standard

Terminal

Using This Chapter

This chapter describes how to configure and program communication

with a PanelView Standard terminal on a DeviceNet network.

Choose Data Types

For the tags in the PanelView terminal, use the following data types as

a starting point.

Data types such as signed integer and float also work with Logix5000

controllers. However they require additional configuration and/or

programming.

For this information: See page:

Choose Data Types 9-1

Choose an Communication Method 9-2

Plan and Configure I/O Slave Tags 9-4

Set Up the Terminal on the Network 9-7

Configure the Scanner to Update I/O Slave Tags 9-9

Address I/O Slave Tags in the RSLogix 5000 Project 9-11

Plan and Configure Explicit Server Tags 9-13

Program the Controller to Get/Set Explicit Server Tags 9-16

Configure Explicit Client Tags 9-19

If the object on the PanelView screen

reads or writes:

Then use this data type: Which uses this many bits in the

PanelView terminal:

single bit bit 1

integer unsigned integer 16