User manual

Publication DNET-UM004A-EN-P - March 2004
9-12 Communicate with a PanelView™ Standard Terminal
DeviceNet tags use this format:
If You Have a SoftLogix5800 Controller
The SoftLogix5800 scanner 1784-PCIDS organizes input and output
memory in 16-bit words. It uses the following address format:
word.bit
The scanner memory uses this format: Which is this tag in the controller:
slot:type.Data[element].bit location:type.Data[element].bit
Where: Is:
location location of the scanner in the system
If you have this scanner: Then location is:
ControlLogix 1756-DNB In a: Location is:
local chassis Local:slot_number_of_scanner
remote chassis adapter:slot_number_of_scanner
where:
adapter is the name of the EthernNet/IP or ControlNet
module in the remote chassis.
CompactLogix 1769-SDN Local:slot_number_of_scanner
SoftLogix5800 1784-PCIDS
FlexLogix 1788-DNBO name of the scanner in the I/O configuration of the controller
EtherNet/IP to DeviceNet Linking
Device (1788-EN2DN)
ControlNet to DeviceNet Linking
Device (1788-CN2DN)
type type of data:
Where: Is:
input from a device I
output to a device O
status of the network S
element specific DINT (DWord, 32-bit integer) within the array
bit specific bit within an integer
Where: Is:
word INT (16-bit integer) with the memory of the scanner
bit specific bit within an integer