User manual

Publication DNET-UM004A-EN-P - March 2004
Tune the Performance of a DeviceNet Network 11-5
Change the Configuration of
the Network
To change the configuration of the network, use RSNetWorx software
to perform the following:
Upload the Current Configuration of the Scanner
Step: See page:
❑ Upload the Current Configuration of the Scanner 11-5
❑ Set the Interscan Delay and Poll Ratio 11-6
❑ Set the I/O Parameters of a Device 11-6
❑ Download the Configuration to the Scanner 11-8
❑ Save the Network File 11-9
4. Double-click the scanner.
5. Click the Module tab.
6. Upload the configuration
from the scanner.
1. Start RSNetWorx software.
2. Open the file for the network, if necessary.
3. Go online.