User manual

Publication DNET-UM004A-EN-P - March 2004
Automate the Replacement of a Failed Device 13-3
Set Up Automatic Device
Recovery
To set up ADR for a device:
Choose an Electronic Key Level for a Device
Use the electronic key options to define how closely a replacement
device must match a failed device before the scanner applies ADR.
The scanner only configures/addresses a device that meets the
checked items in the electronic key of the failed device.
If multiple devices with the same electronic key fail at the same time,
the scanner disables auto-address recovery for those devices. This
prevents the scanner from changing the address of the wrong device.
Step: See page:
❑ Choose an Electronic Key Level for a Device 13-3
❑ Update the Network Configuration File 13-4
❑ Define the Electronic Key 13-5
❑ Enable Auto-Address Recovery for the Scanner 13-6
❑ Set the ADR Settings for the Device 13-6
❑ Download the Changes to the Scanner 13-7
❑ Upload and Save the Network File 13-7