User manual

1 Publication DNET-UM004A-EN-P - March 2004

Chapter

Using FLEX™ I/O Modules on a DeviceNet

Network

How to Use This Chapter

This chapter provides basic information on how to use a Flex I/O

adapter 1794-ADN to connect the following I/O modules to a

DeviceNet network:

• 1793

• FLEX I/O 1794

• FLEX Ex I/O 1797

• 1203-FM1

To use the Flex I/O adapter 1794-ADN:

Step: Page:

❑ Tally Memory Requirements 14-2

❑ Assign an Address to the Adapter 14-3

❑ If You Configure the Adapter Offline 14-3

❑ Set the Address of the Adapter 14-4

❑ If You Change the Configuration of the Adapter 14-4

❑ Interpret the Status Indicators 14-5