User manual

15
Publication 1738-SG001B-EN-P
ArmorPoint I/OArmorPoint I/O
Number of Inputs
Keyswitch Position
Input Signal Range
Input Resolution, Bits
Absolute Accuracy, Current Input
Absolute Accuracy, Voltage Input
Input Step Response, per Channel
Input Conversion Type
PointBus Current (mA)
Power Dissipation, Max.
AAnnaalloogg IInnppuutt MMoodduulleess
11773388--IIEE22CCMM1122 11773388--IIEE22VVMM1122 11773388--IIRR22MM1122
9
11773388--IITT22IIMM1122
9
2222
3366
4…20 mA
0…20 mA
0…10V
±10V
0…600 Ω
±75 mV
16 bits - over 21 mA
0.32 μA/cnt
15 bits plus sign
320 μV/cnt in unipolar or bipolar
mode
16 bits
9.5 mV/cnt
0.03 °C/cnt (pt 385 @ 25 °C)
15 bits plus sign
2.5 mV per count
0.1% Full Scale @ 25 °C7
⎯⎯⎯
⎯
0.1% Full Scale @ 25 °C 7 0.1% Full Scale @ 25 °C7‡ 0.1% Full Scale @ 25 °C7‡
70 ms @ Notch = 60 Hz (default)
80 ms @ Notch = 50 Hz
16 ms @ Notch = 250 Hz
8 ms @ Notch = 500 Hz
70 ms @ Notch = 60 Hz (default)
80 ms @ Notch = 50 Hz
16 ms @ Notch = 250 Hz
8 ms @ Notch = 500 Hz
⎯⎯
Delta Sigma Delta Sigma
⎯⎯
75 75 220 175
0.6 W @ 28.8V dc 0.75 W @ 28.8V dc 1.0 W 1.0 W
7Includes offset, gain, non-linearity and repeatability error terms.
‡ Analog and temperature input modules support these configurable parameters and diagnostics: open-wire with LED and electronic reporting; four-alarm and annunciation set-points; calibration mode and
electronic reporting; under- and over-range and electronic reporting; channel signal range and update rate and on-board scaling; filter-type; temperature scale; channel update rate.
AAnnaalloogg OOuuttppuutt MMoodduulleess
11773388--OOEE22CCMM1122 11773388--OOEE22VVMM1122
Number of Outputs 2 2
Keyswitch Position 4 4
Output Signal Range
4…20 mA
0…20 mA
0…10V
±10V
Output Resolution, Bits
13 bits - over 21 mA
2.5 μA/cnt
14 bits (13 plus sign)
1.28 mV/cnt in unipolar or bipolar mode
Absolute Accuracy, Current Output
0.1% Full Scale @ 25 °C
97
⎯
Absolute Accuracy, Voltage Output
⎯
0.1% Full Scale @ 25 °C
97
Step Response to 63% of FS, Current Output
24 μs ⎯
Step Response to 63% of FS, Voltage Output
⎯ 20 μs
Output Conversion Rate
16 μs 20 μs
PointBus Current (mA) 75 75
Power Dissipation, Max. 1.0 W @ 28.8V dc 1.0 W @ 28.8V dc
9Includes offset, gain, non-linearity and repeatability error terms.
7 Analog output modules support these configurable parameters and diagnostics: open-wire with LED and electronic reporting (OE2C only); fault mode; idle mode; alarms; channel signal range and on-board
scaling.