User manual

4
Publication 1738-SG001B-EN-P
ArmorPoint I/O
NNeettwwoorrkk IImmppaacctt
DeviceNet 1738-ADN12, -ADN18, -ADN18P, and -ADNX
The 1738-ADN12, -ADN18, and -ADN18P provide three
means of connecting a node of I/O to DeviceNet.
The 1738-ADNX expansion network port allows for a
DeviceNet subnet.
A total of 63 ArmorPoint I/O modules can be assembled on a
single DeviceNet node.
Expansion power supplies may be used to provide additional
POINTBus backplane current.
ControlNet™ 1738-ACNR
A total of 63 ArmorPoint I/O modules can be assembled on a
single ControlNet node.
Expansion power supplies may be used to provide additional
POINTBus backplane current.
Up to 25 direct connections and 5 rack connections are
allowed.
EtherNet/IP™ 1738-AENT
A total of 63 ArmorPoint I/O modules can be assembled on a
single EtherNet/IP node.
Expansion power supplies may be used to provide additional
POINTBus backplane current.
Refer to the User Manual, publication 1738-UM004 to
determine the ratings for direct and rack connections
allowed.
PROFIBUS DP™ 1738-APB
A total of 63 ArmorPoint I/O modules can be assembled on a
single PROFIBUS node.
Expansion power supplies may be used to provide additional
POINTBus backplane current.
CCoommmmuunniiccaattiioonn
CCoonnssiiddeerraattiioonnss
ArmorPoint I/O features are impacted by your network choice.