User manual

Important User Information
Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Safety Guidelines for the Application, Installation and
Maintenance of Solid State Controls (publication SGI-1.1
available from your local
Rockwell Automation sales office or online at
http://literature.rockwellautomation.com
) describes some important differences
between solid state equipment and hard-wired electromechanical devices. Because of
this difference, and also because of the wide variety of uses for solid state equipment,
all persons responsible for applying this equipment must satisfy themselves that each
intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes.
Because of the many variables and requirements associated with any particular
installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of
information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written
permission of Rockwell Automation, Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety
considerations.
Allen-Bradley, CompactLogix, ControlFlash, ControlLogix, PowerFlex, Rockwell Automation, RSLinx, RSLogix 5000, Logix5000,
ViewAnyWare, RSNetWorx for EtherNet/IP, RSNetWorx for ControlNet, PanelView, PanelView Plus, FLEX I/O, Powermonitor 3000,
POINT I/O, PowerFlex 40, PowerFlex 70, Data Highway Plus, PowerFlex 700S, Compact I/O, PowerFlex 4, RSNetWorx for DeviceNet, DH+,
MessageView, NetLinx, SLC 5/03, Data Highway II, PLC-2, PLC-3, PLC-5, SLC, RediSTATION, PanelConnect,
Kinetix, RSLogix 5000 with PhaseManager, RSBizWare Batch, and TechConnect are trademarks of Rockwell Automation Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
WARNING
Identifies information about practices or circumstances that can cause
an explosion in a hazardous environment, which may lead to personal
injury or death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful application and
understanding of the product.
ATTENTION
Identifies information about practices or circumstances that can lead
to: personal injury or death, property damage, or economic loss.
Attentions help you identify a hazard, avoid a hazard, and recognize
the consequences.
SHOCK HAZARD
Labels may be on or inside the equipment, such as a drive or motor, to
alert people that dangerous voltage may be present.
BURN HAZARD
Labels may be on or inside the equipment, such as a drive or motor, to
alert people that surfaces may reach dangerous temperatures.