User manual
Publication 1768-UM001C-EN-P - November 2007
30 Communicate over Networks
DeviceNet Network 
Communication
The DeviceNet network uses the Common Industrial Protocol (CIP) to 
provide the control, configuration, and data collection capabilities for 
industrial devices. The DeviceNet network uses the proven Controller Area 
Network (CAN) technology, which lowers installation costs and decreases 
installation time and costly downtime.
A DeviceNet network provides access to the intelligence present in your 
devices by letting you connect devices directly to plant-floor controllers 
without having to hard wire each device into an I/O module.
Communication I/O Modules for DeviceNet
The following table lists the communication I/O modules available for use 
with the DeviceNet network.
DeviceNet Interfaces
Application Required 
Interface
• Communicates with other DeviceNet devices
• Uses the controller as a master on a DeviceNet network
1769-SDN 
DeviceNet 
scanner
• Accesses remote Compact I/O modules over a DeviceNet network
• Sends remote I/O data for as many as 30 modules back to a 
scanner or controller
1769-ADN 
DeviceNet 
adapter
(1)
(1)
This table specifically describes using the 1769-ADN adapter to access remote Compact I/O modules over the 
DeviceNet network. However, CompactLogix controllers can access other Allen-Bradley remote I/O modules 
over the DeviceNet network. In those cases, you must select the appropriate interface. For example, if 
accessing remote POINT I/O modules, you must select the 1734-ADN adapter.
Catalog Number Adapter Specifications
Distributed Block I/O 
1791D CompactBlock I/O 1791D CompactBlock I/O contains a 
built-in adapter in the base block 
• removable terminal block
• 50% smaller than FLEX I/O
• 24V DC and selectable combination analog block
• 4...16 points
• DeviceLogix-enabled
• expandable up to 32 digital points 
1790 CompactBlock LDX I/O CompactBlock LDX I/O contains a 
built-in adapter in the base block
• lowest price-per-point I/O
• digital: 24V DC, 120V AC, 
• analog: current, voltage, RTD and thermocouple
• 4...16 points
• expandable up to 64 points 










