User manual

Publication 1734-UM015A-EN-E - November 2009
12 Introduction
Quick Start - Prepare the
Modules to work on
DeviceNet
Mount the Module
For POINT I/O, see Chapter 2
.
For ArmorPOINT I/O, see Chapter 3
.
Wire the Module
For POINT I/O, see Chapter 2
.
For ArmorPOINT I/O, see Chapter 3
.
Configure DeviceNet Network and
Scanner
See Chapter 4
.
Configure the Module using
RSNetWorx for DeviceNet
See Chapter 6
.
Write the DeviceLogix Program
See Chapter 7
.