User manual

Publication 1734-UM015A-EN-E - November 2009
6 Preface
Who Should Use This
Manual
This manual is intended for qualified personnel. You should know how to do
the following:
• Use RSNetWorx software or similar configuration software to set up
and calibrate these modules.
• Download and use electronic data sheet (EDS) files.
In addition, you should be familiar with RSLogix 5000 and CIP Network
terminology. If you do not, refer to your software documentation or online
help before attempting to use these modules.
Related Publications
Refer to this table for a list of related POINT I/O products and
documentation. The publications are available from
http://literature.rockwellautomation.com/
. For specification and safety
certification information, refer to the installation instructions.
Resource Description
POINT I/O DeviceLogix Module
POINT I/O Module with 8 Configurable 24V DC Points and
DeviceLogix Installation Instructions, publication 1734-IN039
Provides installation information and wiring diagrams for
1734-8CFGDLX modules.
Communication Devices
ControlNet Adapter Installation Instructions,
publication 1734-IN582
Provides installation information about 1734-ACNR adapters.
ControlNet Adapter User Manual, publication 1734-UM008
Describes how to use 1734-ACNR adapters.
DeviceNet Communication Interface Module Installation
Instructions, publication 1734-IN057
Provides installation information about 1734-PDN modules.
DeviceNet Adapter Installation Instructions, publication 1734-IN026
Provides installation information about 1734-ADN and 1734-ADNX
adapters.
DeviceNet Adapter User Manual, publication 1734-UM002
Describes how to use 1734-ADN and 1734-ADNX adapters.
RSNetworx for DeviceNet Getting Results Guide, publication
DRNET-GR001
Describes how to install and navigate the RSNetWorx for
DeviceNet software.
EtherNet/IP Adapter Installation Instructions,
publication 1734-IN590
Provides installation information about 1734-AENT adapters.
EtherNet/IP Adapter User Manual, publication 1734-UM011
Describes how to use 1734-AENT adapters.
Power Supplies, Wiring Base Assemblies, Miscellaneous
Field Potential Distributor Installation Instructions,
publication 1734-IN059
Provides installation information about 1734-FPD distributors.
POINT I/O 24V dc Expansion Power Supply Installation Instructions,
publication 1734-IN058
Provides installation information about 1734-EP24DC power
supplies.
POINT I/O 120/240V ac Expansion Power Supply Installation
Instructions, publication 1734-IN017
Provides installation information about 1734-EPAC power supplies.
POINT I/O Common Terminal Module Installation Instructions,
publication 1734-IN024
Provides installation information about 1734-CTM modules.