Installation manual

8-6 Frame 11 Installation

Lifting and Mounting Frame

11 Drives

Refer to Appendix B - Lifting and Mounting Instructions for detailed

instructions on lifting and mounting the drive. When you have completed

the instructions in Appendix B, continue with the installation as directedd

below.

Removing the Protective

Covers

Moving the Control Frame

To gain access to the power wiring terminals, airflow plate and protective

covers you may need to move the Control Frame out of the way. If you do

not need to move the control frame, continue with "Removing the Airflow

Plate" on page 8-7.

Task Description

Loosen the T8 Torx-head screws that secure the Control Frame to the drive enclosure.

Swing the Control Frame out and away from the power structure.