Installation manual

Frame 14 Installation 11-27
3. The MCCBs can now be closed (see "Closing the Circuit Breakers and
Energizing the Drive" on page 11-27).
Closing the Circuit Breakers and Energizing the Drive
1. Close and latch all enclosure doors.
2. Press the “Close” (green) control button on the enclosure door.
3. The circuit breakers can be opened by pressing the “Open” (red) control
button on the enclosure door.
The motor operators are automatically recharged when they are opened.
Push On
Push Off
OFF
DISCHARGED
SPRING
L
S
I
N
CHARGED
SPRING
Status Text displays “Charged Spring”
when charged.