Installation manual

Chapter 2
Model Numbers of the 8720MC-
RPS Regenerative Power
Supply and its Accessories
About 8720MC-RPS
Regenerative Power Supply
This chapter describes model numbers, major components, their
locations, and terminal blocks of 8720MC-RPS Regenerative Power
Supply.
For operation of the 8720MC-RPS Regenerative Power Supply, a
line reactor is required for each incoming phase as well as a
varistor, a harmonic filter and a contactor. The following figure
shows the model numbers of the 8720MC-RPS Regenerative Power
Supply and its accessories.
Regenerative Power Supply
8720MC-RPSxxxvm-opt
BASE CATALOG NUMBER - CONVERTER
REGENERATIVE POWER SUPPLY SIZE
027 = 27 amp
065 = 65 amp
190 = 190 amp
Inductance as % Voltage Drop
03 = 3%
05 = 5%
10 = 10%
14 = 14%
INPUT VOLTAGE
B = 380 TO 460 VAC
TYPE
M = master
S = slave
Enclosure
blank = open
A = NEMA type 1
Current Rating
032 = 32 Amp
048 = 48 Amp
062 = 60 Amp
070 = 80 Amp
100 = 100 Amp
Voltage
B = 380 to 460 VAC
Voltage
B2 = 380 to 460 VAC
See Note 1
Note 1: Blank includes the 8720MC - RPS only as a spare part.
HV2 option includes the 8720MC - RPS as well as 8720MC-HF-B2 harmonic
filter and 8720MC-VA-B varistor. HV2 option, however, is applied only to
8720MC-RPS027 and 8720MC-RPS065.
Line Reactor
8720MC-LRxx-ayyyb
Harmonic Filter
8720MC-HF-b
Voltage
B = 380 to 460 VAC
Varistor
8720MC-VA-b
Voltage
B = 380 to 460 VAC
EMC Filter Unit
8720MC-EFxxx-Vb
Current Rating
190 = 190 Amp