Installation manual
Installing Your Mass Storage System
Chapter 3
37
Figure 1.8 shows how to connect the peripheral communication module to the
1770-M11 system. Use the twinaxial cable (cat. no. 1770-CD) to connect each
product and perform these steps:
Figure 1.8
How
to Connect the 1770M1
1 System to the Peripheral Communication
Module
Blue
Shield
Clear
1775GA
Peripheral
Communication
Module
1770CD
Twinaxial
Cable
To another Peripheral Communication Module
1770M11
Mass Storage System
11964
1. Match the power outlet voltage to the mass storage system’s voltage. For
example, if your power outlet is 220V AC then change the electrical card
to 220V AC. (Refer to chapter 4.) We ship each mass storage system for
a 120 V AC operation.
2. Connect one end of the twinaxial cable to the peripheral communication
module (Figure 1.9):
Connecting to the PLC3
Peripheral Communication
Module