Installation manual

Index
I–3
Power
Cable, 22, 28
Connect, 27, 43, 48
Indicator, 22, 23, 45, 48
Outlet, 311
Supply, 22, 28
Switch, 22, 27, 44, 47, 48,
A7
Power supply
Electrical, D6
Specifications, 28, D6
Power supply specifications
Adjustability, D9
Input frequency range, D8
Input line regulation, D8
Input surge current, D8
Input voltage, D8
Output power range, D8
Overvoltage protection threshold, D8
Power fail protect, D9
Power limit point, D8
Transient response, D8
Program
Diskette, 29, 44
Operating system, 44
Programmable controller/management
system, 313
Pushbutton
Eject, 22, 24
Restart, 22, 24, 47
R
Rack
Hardware kit, 31
Mount, 31
RAM parity, 24
Read/Write, 47
Read/write, A6, A7
Related publications, 12
Restart
Indicator, 22, 24
Pushbutton, 22, 24, 47
RS422 interface J24 to SCSI module, 22
RS422 interface to SCSI module, 26
S
SCSI, 21, 22, B1, C1
Serial channel J22, 26
Shock, A1
Single inline pacts, 310
SIP, 310
Specifications
1770-M10 Storage, D3
1770-M11 Storage, D3
1770-M12 Storage, D3
Electrical (power supply), D6
Environmental conditions, D1
Functional, D5
Input current range, D1
Input voltage range, D1
Mechanical (power supply), D6
Micro-floppy disk drive, D5
Micro-floppy diskette, D5
Physical, D2
Spindle hole, A6
Spoecifications, Mass storage, D1
Start-up, 44, 48
Storage, Additional, 311
Switch assembly, 35
Switches
Baud rate, 22, 27, 39, 45
Fuse holder, 110/220V, 27
Fuseholder, 110/220V, 22, 41
Power, 22, 27, 44, A7
Power connect J19, 22, 27
System
1770-M10, 21, 22, 31, 41
1770-M11, 21, 22, 31, 41, B1
1770-M12, 21, 22, 31, 41
Connection, 313
Fault, 24
Start-up, 44, 48
T
Terminator, 312
Test J23, 22, 26, B2
Troubleshooting
1770-M11, 52
Aids, 51
Twinaxial cable, 22, 26, 37, 38,
B2
U
Unit number, 310
V
Vibration, A1