Specifications

Publication GMC-SG001E-EN-P — June 2001
Software 5-11
Figure 5.11
Slope View
Editing and Viewing Motion Application Performance Profiles
The Output Cam Editor is an easy-to-use graphical user interface within RSLogix 5000 that you can use to
edit and view performance profiles (OUTPUT_CAM arrays). It can be launched from the Data Monitor or
Data Editor and from the Motion Arm Output Cam instruction.
The design of the Output Cam Editor is similar to the design of the Cam Editor [3] and consists of two
different views and a toolbar. Each view is a different representation of the same OUTPUT_CAM array.
The graph view displays the Output Cam profiles as line graphs ordered by output bit. The grid view is a
direct representation of the array data. The toolbar provides access to the Insert, Undo, Redo, Zoom-In,
Zoom-Out, and Zoom-To-Fit commands.
Figure 5.12
Output Cam Editor
RSLogix 5000 Programming Software Catalog Number
Note: Catalog numbers consist of various characters, each of which identifies a specific version or option
for that component. Use the catalog numbering chart below to understand the configuration of your
software. For questions regarding product availability, contact your Allen-Bradley distributor.
9324 - RLD300ENE
Bulletin Number
RSLogix5000 Programming Software on CD-ROM