Specifications
Publication GMC-SG001E-EN-P — June 2001
Motors 6-3
F-Series Motors
F-Series motors are commonly used when applications require
higher inertia-matching capability. Typical applications include
web and film processing, machine tool/metal cutting, textile
machinery, or cam replacements.
Each servo motor features:
•
Compact design that is mechanically interchangeable with the H-Series family.
•
Continuous torque from 3.5 to 28 N-m (31 to 245 lb-in.).
•
Speeds up to 4000 RPM.
•
Ferrite permanent magnet rotors that provide approximately four times greater rotor inertia than the
H-Series family for matching larger load inertias.
•
Internal thermal switch to indicate overheating.
•
Motor-mounted 2000-line optical encoder featuring quadrature output of 8000 pulses per revolution.
•
Water-tight MS connections compatible with standard cable assemblies, and extruded aluminum
housing that provide an IP65 rating when the optional shaft seal is installed.
•
Economical, compact design ready for harsh environments.
•
Optional spring-set holding brakes available with 24V DC.
•
Axially-trapped front bearing in a steel insert for long life at high speeds.
•
UL listed.
Note: For drive compatibility, refer to the Motor Selection Chart in Preface.