Specifications

Publication GMC-SG001E-EN-P — June 2001
Motors 6-9
Load Force Ratings
The following section contains the F-Series motor radial and axial load force ratings.
Motors are capable of carrying an axial load in most applications according to the following general
guidelines. These guidelines should only be used as approximations.
Figure 6.3
F-Series Motor Load Forces (F-xxxx-Q-xxxAx)
Brake Specifications and Application Guidelines
The following section contains the F-Series brake motor specifications and application guidelines.
Specifications
Motor
500 RPM
kg (lbs)
1000 RPM
kg (lbs)
2000 RPM
kg (lbs)
3000 RPM
kg (lbs)
4000 RPM
kg (lbs)
F-4030 34.5 (76) 27.2 (60) 21.3 (47) 18.6 (41) 17.2 (38)
F-4050 39.9 (88) 31.3 (69) 24.9 (55) 21.8 (48) 20.0 (44)
F-4075 41.7 (92) 33.1 (73) 26.3 (58) 23.1 (51) 20.9 (46)
F-6100 72.1 (159) 57.1 (126) 45.4 (100) 39.5 (87) –
F-6200 78 (172) 61.7 (136) 49 (108) 42.6 (94) –
F-6300 83 (183) 65.8 (145) 52.2 (115) 45.8 (101) –
Motor Series
Maximum backlash (brake engaged)
minutes
Holding torque
N-m (lb-in.)
Coil current at 24V DC
Amps
F-4000 44 10.2 (90) 0.69
F-6000 29 31.1 (275) 1.30
•
With no radial load, the axial load rating is 100%
of the radial load rating from the table above.
•
With a radial and an axial load, the axial load
rating is 44% of the radial load rating from the
table above.
Radial load force applied at the
center of the shaft extension
Axial load force