Specifications

Publication GMC-SG001E-EN-P — June 2001
6-12 Motors
Wire Sizing Recommendations
The following section contains the wire sizing recommendations for the power, encoder and brake
connectors.
Connectors
1
Sizes are recommended minimum values for 4 conductors (U, V, W and GND).
Note: Wiring should be twisted, and local regulations should always be observed.
Note: These specifications are the recommended minimum mechanical size.
F-Series Motor Catalog Number
Note: Catalog numbers consist of various characters, each of which identifies a specific version or option
for that component. Use the catalog numbering chart below to understand the configuration of your
motor. For questions regarding product availability, contact your Allen-Bradley distributor.
Motor
Power Connector
Motor
Encoder Connector
Motor
Brake Connector
Wire
1
mm
2
(AWG)
Wire
mm
2
(AWG)
Wire
mm
2
(AWG)
F-4030
1.5
2
(16)
F-4030
0.25
2
(24)
0.324
2
(22)
F-4030
0.75
2
(18)
F-4050
2.5
2
(14)
F-4050 F-4050
F-4075 F-4075 F-4075
F-6100
4
2
(12)
F-6100 F-6100
F-6200
10
2
(8)
F-6200 F-6200
F-6300 F-6300 F-6300
F - 4030 - Q - x 0 x xx
Factory Designated Special Options
AA = STANDARD
AN = NEMA (4000 Series Only)
Options
00 = STANDARD
04 = 24V DC Brake
Optical Encoder Line Count
F = 1000
H = 2000 (STANDARD)
K = 5000
L = 500
M = 3000
Motor Winding KE Designator
Frame Size
Series Designator
F = Medium Inertia
Note: Optional configurations or encoder line counts have extended
lead times and additional charges.
Note: Options are not available in all sizes.
* The maximum speed with the 5000-line encoder is 2400 RPM
because of the frequency output limit of the encoder.