Specifications

Publication GMC-SG001E-EN-P — June 2001
Motors 6-15
Winding Specifications
1
Peak value of per phase sine wave amps.
2
Peak value of sinusoidal phase to phase volts.
3
At 125° C (257° F) winding temperature, in a 40° C (104° F) ambient; motors 3007, and 3016 mounted 0.25 in. x 10 in. x 10 in.; motor 4030 mounted on 0.5 in. x 12 in. x 12 in.
Storage and Operating Specifications
Thermostat Specifications
1
The thermostat is normally used as a switch for a 24V DC logic signal.
Motor
Sine wave K
T
torque
constant at 25° C (77° F)
1
N-m/A (lb-in./A)
K
E
voltage
constant
2
V/kRPM
Winding resistance phase to
phase at 25° C (77° F)
Ohm
Winding inductance
phase to phase
mH
Thermal
resistance
3
°C/Watt
Poles
H-2005-K 0.13 (1.2) 16 2.6 4.1 1.5 4
H-3007-N 0.28 (2.5) 34 6.6 12 1.2
6
H-3016-N 0.28 (2.5) 34 1.3 3.4 0.89
H-4030-P 0.5 (4.4) 60 2.0 9.0 0.79
H-4050-P 0.5 (4.4) 60 0.69 3.3 0.57
H-4075-R 0.74 (6.6) 90 0.9 5.4 0.48
H-6100-Q 0.68 (6) 82 0.49 4.4 0.34
8
H-6200-Q 0.66 (5.8) 80 0.18 2.2 0.31
H-6300-Q 0.7 (6.2) 85 0.12 1.2 0.24
H-8350-S 0.86 (7.6) 104 0.13 2.5 2.5
H-8500-S 0.92 (8.2) 112 0.1 2.4 0.21
Specification Description
Ambient Temperature
Operating: 0° to 40° C (32° to 104° F)
Storage: -30° to 70° C (-25° to 158° F)
Relative Humidity 5% to 95% non-condensing
Shock 10g peak, 6 ms duration
Vibration 2.5g peak, 3-2000Hz
Specification Description
Rated voltage
0 - 250V DC or 50/60 Hz AC
1
Rated current
2.5A at power factor of 1.0
1.6A at power factor of 0.6
Maximum switching current 5A
Contact resistance Less than 0.10 Ohms maximum
Contacts Normally closed
Insulation dielectric Mylar Nomex capable of withstanding 1500V AC RMS 50/60 Hz for 1 minute
Opening temperature ±5° C (±41° F) 140° C (284° F)