Specifications

Publication GMC-SG001E-EN-P — June 2001
Motors 6-19
Load Force Ratings
The following section contains the H-Series motor radial and axial load force ratings.
Motors are capable of carrying an axial load in most applications according to the following general
guidelines. These guidelines should only be used as approximations.
Figure 6.7
H-Series Motor Load Forces (H-xxxx-P-x0xAx)
Motor
500 RPM
kg (lb)
1000 RPM
kg (lb)
2000 RPM
kg (lb)
3000 RPM
kg (lb)
4000 RPM
kg (lb)
5000 RPM
kg (lb)
6000 RPM
kg (lb)
H-2005 63.5 (140) 50.8 (112) 39.9 (88) 34.9 (77) 31.8 (70) 29.5 (65) 20.4 (45)
H-3007 68.0 (150) 54.4 (120) 43.1 (95) 37.6 (83) 34.0 (75) 31.8 (70) –
H-3016 76.2 (168) 60.8 (134) 47.6 (105) 41.7 (92) 38.1 (84) 35.4 (78) –
H-4030-M 102.1 (225) 91.6 (202) 72.6 (160) 63.5 (140) 57.6 (127) ––
H-4030-P 102.1 (225) 91.6 (202) 72.6 (160) 63.5 (140) 57.6 (127) ––
H-4050 123.8 (273) 98.9 (218) 78.0 (172) 68.0 (150) 62.1 (137) ––
H-4075 129.7 (286) 104.3 (230) 82.6 (182) 71.2 (156) 65.3 (144) ––
H-6100 263.1 (580) 208.7 (460) 165.6 (365) 145.2 (320) –––
H-6200 283.5 (625) 226.8 (500) 179.2 (395) 156.5 (345) –––
H-6300 299.4 (660) 235.9 (520) 188.2 (415) 163.3 (360) –––
H-8350 299.4 (660) 238.1 (525) 188.2 (415) –– ––
H-8500 313.0 (690) 249.5 (550) 197.3 (435) –– ––
• With no radial load, the axial load rating is 100%
of the radial load rating from the table above.
• With a radial and an axial load, the axial load
rating is 44% of the radial load rating from the
table above.
Radial load force applied at the
center of the shaft extension
Axial load force