Specifications

Publication GMC-SG001E-EN-P — June 2001
6-24 Motors
MP-Series Motors
MP-Series low-inertia, brushless servo motors feature a newly
engineered construction that reduces motor size while delivering
significantly higher torque.
Each servo motor features:
•
230V or 460V motor windings.
•
A segmented core stator design that allows for the maximum amount of copper winding material in a
smaller area for more output with a given current input.
•
Improved winding encapsulation material for enhanced thermal management and heat transfer,
resulting in higher performance.
•
High-energy neodymium (NeFeB) magnets for a maximum torque-to-inertia ratio and, consequently,
quicker motor acceleration and deceleration.
•
Speeds up to 5000 rpm.
• Automatic configuration of motor parameters within the drive for simplified set up and peak
performance.
•
Multiple electronic configurations within a frame size for optimal servo system capabilities with a less
powerful drive, potentially reducing costs.
•
Easily reversible motor connectors for compatibility with various applications and minimal servo motor
impact on machine design considerations.
•
Internal thermal protection sensor to prevent motor damage.
•
IP-66 rating for environmentally rugged motor with shaft seal installed (no motor disassembly
required).
•
Maximized shaft diameter for increased strength.
•
Standard IEC mounting dimensions.
•
UL listed insulation system for increased torque-producing current.
Note: For drive compatibility, refer to the Motor Selection Chart in Preface.