Specifications

Publication GMC-SG001E-EN-P — June 2001
6-76 Motors
Motor Options
Options available for the 1326AS Series include:
•
Integral spring-set holding brakes with 24V DC coils (-K3, -K4, -K6, and -K8).
•
Shaft Oil Seal Kits for installing a Nitrile shaft seal in the field. Motor disassembly is not required. When
the shaft seal is installed, the motor is dust tight, able to withstand pulsating water jets and meets the
IP65 requirements of the IEC 529 standard.
•
A Junction Box Kit (1326AS-RJxx) that can be installed in the field and which allows the existing motor
connectors to be mounted axially (rather than radially) without further wiring is available with either
front or rear exit connections.
•
Right-angle connector cables (1326-xxx-RA-xxx, -RAL-xxx, -RB-xxx, and -RBL-xxx).
Figure 6.25
1326AS Servo Motor Options (1326AS-Bxxx-21-Kx)
Nitrile Shaft Oil Seal
Optional Integral Brake
(Internal to Motor)
Junction Box Kit
(For Axial Cable Orientation)