Specifications

Publication GMC-SG001E-EN-P — June 2001
8-10 Motion Control Accessories
Ultra Family Cable Catalog Numbers
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering charts below to understand the configuration of your cables. For
questions regarding product availability, contact your Allen-Bradley distributor.
Motor Power and Feedback Cables
Serial Interface Cables
2090 - U X N xx - xx xx S xx
Length
01 = 1 m (3.3 ft.)
1
, 03 = 3 m (9,9 ft)
2
, 09 = 9 m (29.5 ft)
3
, 15 = 15 m (49.2 ft)
4
, and 30 = 30 m (98.4ft)
5
Motor Connector
S = Straight
Wire Gauge Size (AWG) Applies to power cables only.
16, 14, and 10
Motor Series
H, HF, MP, N. and Y
Cable Type
PA = 115/230V motor power
FB = Motor feedback to drive
FD = Motor feedback to no connector
Flex Option
N = Non-flex cable
Drive
X = Ultra3000 and Ultra5000
Drive Family
U = Ultra
Bulletin Number for Accessories and Options
1
Tolerance is +10/-0 cm (+25.4/-0 in.).
2
Tolerance is +15/-0 cm (+38.1/-0 in.).
3
Tolerance is +30/-0 cm (+76.2/-0 in.).
4
Tolerance is +45/-0 cm (+114.3/-0 in.).
5
Tolerance is +60/-0 cm (+152.4/-0 in.).
2090 - U X PC-D09 xx
Connector Type
D09 (9-pin, D-Shell for RS-232/RS485 serial
interface to personal computer)
Host
PC = Personal computer
Drive
X = Ultra3000 and Ultra5000
Drive Family
U = Ultra
Bulletin Number for Accessories and Options
Length
01 = 1 m (3.3 ft.)
1
, 03 = 3 m (9,9 ft)
2
, 09 = 9 m (29.5 ft)
3
, 15 = 15 m (49.2 ft)
4
, and 30 = 30 m (98.4ft)
5
1
Tolerance is +10/-0 cm (+25.4/-0 in.).
2
Tolerance is +15/-0 cm (+38.1/-0 in.).
3
Tolerance is +30/-0 cm (+76.2/-0 in.).
4
Tolerance is +45/-0 cm (+114.3/-0 in.).
5
Tolerance is +60/-0 cm (+152.4/-0 in.).