Specifications

Publication GMC-SG001E-EN-P — June 2001
Logix™ 1-15
Termination Panel
The 1784-PM02AE SoftLogix termination panel is used in conjunction with the 1784-PM02AE 2-axis
SoftLogix servo card to facilitate the wiring of drives and encoders for use with the card. Because the card
is installed inside the PC computer cabinet, it would be difficult to access for wiring drives, encoders and
other products. A termination panel, mounted separately from the card, allows for easier access to the two
axis terminals.
The following section contains 1784-PM02AE termination panel dimensions and panel wiring connection
data.
Panel Dimensions
Figure 1.6
1784-PM02AE-TPxx Termination Panel Dimensions
Note: For information on the 1784-PM02AE-TP0x termination cable, refer to the SoftLogix5800 Selection
Guide (publication 1789-SG001B-EN-P).
Termination Panel Wiring Connection Data
Servo Card Connection
Figure 1.7
1784-PM02AE-TP0x Servo Card Connection
77
(3.034)
113
(503.099)
P2
P3
P4
P1
L1
Dimensions are in millimeters (inches).
P1