Specifications

Publication GMC-SG001E-EN-P — June 2001
8-52 Motion Control Accessories
Harsh Environment Connection
Use the IP67 cable (with the -L option) with an L motor for harsh environments.
Figure 8.61
Harsh Environment Connection
Double-Ended Bulkhead In-Line Connection
This solution combines flex and nonflex cables for a single run. Shown below are two disconnects in a
single cable run with a double-ended bulkhead, a double-ended standard, and a standard cable.
Figure 8.62
Standard, Double-Ended Bulkhead, and Double-Ended Cable for In-Line Connection to Flex Track
IMPORTANT
To avoid control performance problems ensure the overall length of cable
combinations (system/axis module to motor) does not exceed 90 m (295.5 ft).
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
1394
1326Ax-xxxx-21-xx L
IP67 Servo Motor (460V)
1326-CCUx- x L-xxx (resolver feedback) or
1326-CECUx- x L-xxx (high resolution feedback)
1326-CPB1x- L-xxx /-CPC1x- L-xxx (power)
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
1394
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
AB
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
AB
Power Track
(not provided)
1326Ax Servo Motors (460V)
Brackets
(not provided)
Maximum width
4.6 mm (0.2 in.)
1326-CPB1-D /-CPC1-D (power)
1326-CPB1T-EE /-CPC1T-EE (flex power)
1326-CCUT-EE (flex feedback)
1326-CCU-D (feedback)
1326-CPB1-xx /-CPC1-xx (power)
1326-CCU-xx (feedback)