Specifications

Publication GMC-SG001E-EN-P — June 2001
8-60 Motion Control Accessories
1326AB Motor Feedback Mounting Adapters for 1394 Family
The following section contains configuration diagrams and catalog numbers for the feedback mounting
adapters available for 1326AB servo motors.
Figure 8.63
1326AB Servo Motor Encoder Mounting Adapter (1326AB-MOD-Mxx)
Note: Use servo clamps to mount an 845H servo mount encoder to the adapter plate.
Note: Coupling accommodates 9.53 mm (0.375 in.) encoder shaft.
Note: Servo clamps accommodate both English and metric servo encoder mounting configurations.
IMPORTANT
These adapters are not available for high-resolution feedback (-M2, -Ml, and -S2) motors.
IMPORTANT
Motors with IP65 or IP67 protection lose their rating when this option is used.
To avoid equipment damage caused by the gasket after adapter installation, remove
and discard gasket during disassembly.
82.6 mm (3.25 in.) Maximum for All Motors
Gasket
(remove and discard)
Faston Type
Connector
1326AB Motor
Coupling
Adapter
845H
Encoder
Access to Coupling
Servo Clamp
845H Mounting
ATTENTION
!