Specifications

Publication GMC-SG001E-EN-P — June 2001
Motion Control Accessories 8-65
1326AS Series Motor Junction Box Kit
1
Catalog Number
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering chart below to understand the configuration of your motor
junction box kit. For questions regarding product availability, contact your Allen-Bradley distributor.
1
The motor comes standard with IP65 plug style connectors mounted radially to the motor. This kit allows the connectors to be brought out axially to the motor without further
wiring. Kit includes a motor junction box and mounting hardware.
1394 Motion Control System Motor Shaft Seal Kits
The following section contains motor shaft seal kit descriptions and catalog numbers for the 1326AB and
1326AS servo motors used as part of a 1394 motion control system.
1326AB Series Motor Shaft Seal Kit
Allen-Bradley offers a Viton shaft oil seal kit that you can install on a motor in the field. Use the seal in
applications where the motor shaft may be subjected to occasional oil splashes or low pressure water
jetting. An example would be when a motor is exposed to splashing from coolant nozzles.
1326AB Series Motor Shaft Seal Kit Catalog Number
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering chart below to understand the configuration of your motor shaft
seal kit. For questions regarding product availability, contact your Allen-Bradley distributor.
IMPORTANT
A shaft seal kit must be installed on the motor to meet IP65 requirements. The kit is not
intended to be used in applications where the motor shaft is partially or fully submerged
in oil.
IMPORTANT
The IP67 motor option (-L) has a factory-installed shaft seal and does not require this kit
option.
1326AS - RJ34
Bulletin Number
Ty pe
RJ34 = Right angle junction box for B3 and B4 series motors.
1326-MOD-SS-V- xxx
Bulletin Number
Shaft Seal
Viton
Motor Series
AB4 = For a B4 series motor (IEC metric)
B2 = For a B5 series motor (IEC metric)
C2 = For a B7 series motor (IEC metric)
Modification Kit