Specifications

Publication GMC-SG001E-EN-P — June 2001
1394 Drive System Family 4-7
System Module Catalog Numbers
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering table chart below to understand the configuration of your system
module. For questions regarding product availability, contact your Allen-Bradley distributor.
1394 System Module
1
The Standard GMC and GMC Turbo system modules are identical except that the GMC Turbo (1394x-SJTxx-T) offers a SLC backplane interface and 64K of memory with a
32-bit processor while the Standard GMC (1394x-SJTxx-C) offers 32K of program memory with a 16-bit processor without the SLC interface.
2
The Standard GMC (1394C-SJTxx-L) is functionally the same as the (1394x-SJTxx-C) except it supports one axis and provides two auxiliary encoder inputs.
3
Only available on 5 and 10 kW system modules.
4
Enhanced system modules have Smart Power, improved terminations, and EMI filtering. Enhancements are available only with 1394C-SJTxx-A, -C, -D, -L, and -T system
modules.
1394 x - S J T xx-x - xx
RL = With RIO and AxisLink (can only be ordered wit the -C, -L, or -T options)
Factory Installed Options
1, 2
A = With ±10V DC analog input (HIM not included)
C = With IMC S Class integrated motion controller (supports four axes and four auxiliary encoder inputs)
3
D = With SERCOS network interface
L = With IMC S Class integrated motion controller (supports one axis and two auxiliary encoder inputs)
3
T = With IMC S Class Turbo integrated motion controller.
E = With 9/Series interface
kW Rating
05 = 5 kW
10 = 10 kW
22 = 22 kW (not available with the -L option)
Input Phase
T = Three-phase
Input Voltage
J = 360/480V AC, 50/60 Hz
Type
S = System Module
Series
C = Series C enhancements
4
Blank = No Series C enhancements
Bulletin Number