Specifications

Publication GMC-SG001E-EN-P — June 2001
1394 Drive System Family 4-15
Figure 4.9
1394 Axis Module Front View Dimensions (1394x-AM50, -AM50-IH, -AM75, and -AM75-IH)
Figure 4.10
1394 Axis Module Side View Dimensions(1394x-AM50 and -AM75)
350
(13.78)
400
(15.75)
37.5
(1.48)
75
(2.95)
75
(2.95)
385
(15.16)
8 (0.32)
8 (0.31)
8 (0.31)
10.1 (0.4)
15.9 (0.63)
12 (0.47)
Fastener
Location
1
Dimensions are in millimeters and (inches).
Depth = 280 (11.02)
Mounting Hole Detail
All slots accept M6 or 1/4-20 Mtg. screws.
1
Dimension shown is for mounting hardware location
and does not reflect the location of the lower slot
radius.
43.69
(1.72)
105
(4.13)
338.1
(13.31)
385
(15.16)
280
(11.02)
Dimensions are in millimeters
and (inches).
Important: Additional clearance below
the axis is necessary to allow for the
recommended cable bend radius.
Heat sink width only