User manual

Publication 1756-RM093F-EN-P - January 2010 79
Safety Instructions Appendix A
Metal Form Safety
Application Instructions
These instructions are available in RSLogix 5000 software, version 17
and later.
Mnemonic Name Purpose Certification
CBCM Clutch Brake Continuous
Mode
Used for press applications where continuous operation is desired. • BG
• TÜV
CBIM Clutch Brake Inch Mode Used for press applications where minor slide adjustments are required, such
as press setup.
• BG
• TÜV
CBSSM Clutch Brake Single
Stoke Mode
Used in single-cycle press applications. • BG
• TÜV
CPM Crankshaft Position
Monitor
Used to determine the slide position of the press. • BG
• TÜV
CSM Camshaft Monitor Monitors motion for the starting, stopping, and running operations of a
camshaft.
• BG
• TÜV
EPMS Eight-position Mode
Selector
Monitors eight safety inputs to control one of the eight outputs corresponding
to the active input.
• BG
• TÜV
AVC Auxiliary Valve Control Controls an auxiliary valve that is used in conjunction with a main valve. • TÜV
MVC Main Valve Control Controls and monitors a main valve. • BG
• TÜV
MMVC Maintenance Manual
Valve Control
Used to manually drive a valve during maintenance operations. • BG
• TÜV