User manual

Publication 1734-UM011A-EN-P - February 2004
Index
Numbers
1734-AENT
overview
1--1
adapter features 1--4
control and information protocol
(CIP)
1--5
hardware/software compatibility
1--5
producer/consumer model 1--6
rack optimized and direct
connections
1--6
requested packet interval (RPI)
1--6
what it does 1--5
1734-AENT LED status indicators 6--1
1734-AENT safety approvals 7--1
1734-AENT specifications 7--2
1734-POINT I/O catalog numbers C--1
A
about the 1734-AENT adapter 1--1–1--6
adapter features 1--4
common industrial protocol (CIP)
1--5–1--6
mixing rack optimized and direct
connections
1--7
producer/consumer model 1--6
rack optimized and direct connections
1--6–1--7
requested packet interval (RPI) 1--6
what the 1734-AENT adapter does
1--5
about this user manual Preface-1–
Preface-8
adapter diagnostic information, web
pages
A--2
adapter features 1--4
adapter LED status indicators 6--1
adapter safety approvals 7--1
adapter specifications 7--2
adapter, mounting dimensions 2--5
adapter, replacing on system 2--3
adapter, wiring 2--4
adding modules to configuration
select a communication module
5--4
B
BootP
see Rockwell Bootp utility
using a third party BootP server
3--10
browse chassis, web pages A--7
C
catalog numbers C--1
CIP 1--5
common techniques used in this manual
Preface-1
communication module
selecting in RSLinx
5--4
configuration page, web pages A--8
configuration requirements 3--2–3--5
gateway address 3--3–3--4
IP address 3--2
subnet mask 3--4–3--5
configuring Ethernet communication
drivers
B--4, B--6
AB_ETH, ETHIP driver B--2–B--4,
B--6
installing the software B--1
configuring the module 3--1–3--10
using a third party BootP server 3--10
using DHCP software 3--10
using the Rockwell BootP utility 3--7–
3--10
connection statistics, web pages A--5
common industrial protocol (CIP) 1--5–
1--6
controller tag reference C--1
analog 2 channel input C--10
analog 2 channel output C--19
discrete 2 POINT input C--3
discrete 2 POINT output
with over load
C--7
with over load & open load C--6
without diagnostics status C--5
discrete 4 POINT input C--4
discrete 4 POINT output
with over load
C--9
with over load & open load C--8
specialty I/O C--23
controller tags
editing
4--14–4--15