User manual

Publication 1734-UM011A-EN-P - February 2004
4-6 Configure the 1734-AENT for Direct Connection in RSLogix 5000
Add the POINT I/O Adapter to the I/O Configuration
Next, you must add the 1734-AENT adapter as a “child” of the local
1756-ENBT module.
1. In the Project window, right click on the local 1756-ENBT module
under the I/O Configuration folder and select New Module from the
pop-up window.
The Select Module Type window will open.
2. Select the 1734-AENT/A Ethernet adapter from the list and click on OK.